|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift 1.5 m, as directed by Engineer-in-charge:2.1.1 All kinds of soil. 0 to 0.30 M. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil directed, within a lead of 50 m including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1) Cement: 6 Coarse sand (zone-III): 12 graded Brick aggregate 40 mm nominal size). |
| 4 | Brick work with common burnt clay (non modular) bricks of class-150 in fondation and plinth in: Cement motar 1:4 (1 cement: 4 coarse sand) |
| 5 | 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement: 2 Coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size). |
| 7 | providing and layying rectified Glazed Ceramic floor floor tiles of size 300x300 mm or thickness specified etc all complete.. |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in positiin and applying a priming coat of approved steel primer all complete. |
| 9 | Providing and fixing ISI marked flus door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, Steel handeles, siliding bolt, Door stopper and tower bolt. (A) 35 mm thick |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15\" landings, balconles, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finihing and reinforcement: 1:1.5:3 (1 Cement: 1.5 Coarse sand (zone-III): 3 graded stone aggregate 20 mm (nominal size). |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Providing and fixing White Vitreous china water closet squatting pan (indian type): Orissa pattern W.C. pan of size 580*440 mm. |
| 13 | Providing and fixing P.V.C. low level flushing cistren with manually contor lled device (handle lever conforming to is 7231, with all fittings and fixture com. 10 litre capacity -White. |
| 14 | Providing and fixing of 1.5 HP submersible pump (60.00m) etc all complete (At per attached sheet) |
| 15 | Cartge of earth up to 3.00 km Including Loading & unlaoding but excluding staking pucca road etc all compitete.... |
| 16 | Brass bib cock heavy quality (Gem mikadev/Encess\"s williams or equivalente). 15 mm dia 400 gms |
| 17 | Chlorinated Polyninyl-chloride (CPVC) pipe SRD-11 25mm outer dia.. |
| 18 | Chlorinated Polyninyl-chloride (CPVC) pipe SRD-11 50 mm outer dia.. |
| 19 | Wash hand basin 550*400 mm size of white glazed earthen ware (22\"*16\") |
| 20 | Mirror of Atul make with Indian polish of 600*450 mm dia size with beveled edge. |
| 21 | TAX18% Please Enable Macros to View BoQ information |
