|
| 1 | Gear Shaft | AS PER RFP |
| 2 | Gear Liver | AS PER RFP |
| 3 | Brake Shoe front and rear | AS PER RFP |
| 4 | Gear box repairs service | AS PER RFP |
| 5 | Clutch and brake cable | AS PER RFP |
| 6 | The above mentioned parts removing and full service gearbox full stripping and service reassembling new parts fitting and vehicle started and running | AS PER RFP |
| 7 | Engine oil leaking engine stripping checking piston rings change bore reboring piston setting | AS PER RFP |
| 8 | Spark plug | AS PER RFP |
| 9 | Wiring Kit | AS PER RFP |
| 10 | Chain Sprocket Kit | AS PER RFP |
| 11 | Clutch brake and Km cable | AS PER RFP |
| 12 | Seat Cover | AS PER RFP |
| 13 | Above mentioned parts removing and veh service and veh starting and testing | AS PER RFP |
| 14 | Front and Rear wheel drum bend removing and spoke adjusting | AS PER RFP |
| 15 | Oil seal kit | AS PER RFP |
| 16 | Seat Cover | AS PER RFP |
| 17 | Cone Set | AS PER RFP |
| 18 | Wheel bearing | AS PER RFP |
| 19 | Indicator front and rear | AS PER RFP |
| 20 | Headlight bulb | AS PER RFP |
| 21 | Brake Shoe front and rear | AS PER RFP |
| 22 | Chain Sprocket Kit | AS PER RFP |
| 23 | All above mentioned parts removing and new parts fitting and vehicle full running | AS PER RFP |
| 24 | Front mud guard | AS PER RFP |
| 25 | Chassis welding | AS PER RFP |
| 26 | Side Stand | AS PER RFP |
| 27 | Clutch accelerator and Kilometre cable | AS PER RFP |
| 28 | Clutch assembly | AS PER RFP |
| 29 | Brake Shoe front and rear | AS PER RFP |
| 30 | The all above parts removing and full service reassembling new parts fitting | AS PER RFP |
| 31 | Ignition kew switch | AS PER RFP |
| 32 | Headlight assembly | AS PER RFP |
| 33 | Side Cover | AS PER RFP |
| 34 | Seat lock | AS PER RFP |
| 35 | Indicator | AS PER RFP |
| 36 | Fuel guage | AS PER RFP |
| 37 | Dickey lock | AS PER RFP |
| 38 | Full vehicle service and engine gearbox and clutch servicing and testing all parts | AS PER RFP |
| 39 | The above mentioned parts removing and full service reassembling new parts fitting | AS PER RFP |
| 40 | Gearbox assembly dismantling the vehicle and checking the clutch plate pressure plate | AS PER RFP |
| 41 | Pump assembly and nozzle removing and stripping and checking all parts injector nozzle | AS PER RFP |
| 42 | Hub oil seal leacking removing and new oil seal fitting and leaking checking | AS PER RFP |
| 43 | The veh full service with water pump belt cabin air filter wiper blade front brake calliper | AS PER RFP |
| 44 | Gear box assembly dismantling the vehicle and clutch plate pressure plate | AS PER RFP |
| 45 | Clutch plate | AS PER RFP |
| 46 | Pressure Plate | AS PER RFP |
| 47 | Release bearing | AS PER RFP |
| 48 | Fly wheel assembly lathe work skimming and finishing | AS PER RFP |
| 49 | Auxiliary gear box dismantling the vehicle and taken to the lathe machine shop | AS PER RFP |
| 50 | The gear box both main and auxiliary mounting the vehicle and full fitting | AS PER RFP |
| 51 | Clutch plate | AS PER RFP |
| 52 | Pressure Plate | AS PER RFP |
| 53 | Release baring | AS PER RFP |
| 54 | Front wheel bearing outer | AS PER RFP |
| 55 | Front wheel bearing inner | AS PER RFP |
| 56 | Hub oil seal inner and outer | AS PER RFP |
| 57 | Brake pad set | AS PER RFP |
| 58 | Exel oil seal | AS PER RFP |
| 59 | Back wheel cylinder | AS PER RFP |
| 60 | Clutch cable | AS PER RFP |
| 61 | Spider bearing | AS PER RFP |
| 62 | Spark plug | AS PER RFP |
| 63 | Oil switch | AS PER RFP |
| 64 | Gear box assembly dismantling the vehicle old clutch plate pressure plate | AS PER RFP |
| 65 | Wheel alignment and balancing | AS PER RFP |
| 66 | Ignition switch | AS PER RFP |
| 67 | Relay 12 and 24 | AS PER RFP |
| 68 | Ignition switch and all relay fitting and full electrical system checking ECU DC | AS PER RFP |
| 69 | Yoke and milling with lathe machine pressing machine welding and finishing welding | AS PER RFP |
| 70 | Universal joint | AS PER RFP |
| 71 | Old yoke and milling universal joint removing the vehicle after lathe work to taken and fitting | AS PER RFP |
| 72 | Wheel bearing front inner | AS PER RFP |
| 73 | Wheel bearing front outer | AS PER RFP |
| 74 | Oil seal front | AS PER RFP |
| 75 | Balancing rod bush big | AS PER RFP |
| 76 | Balancing rod bush small | AS PER RFP |
| 77 | Brake pad | AS PER RFP |
| 78 | Wall door packing with seal | AS PER RFP |
| 79 | Gear box bedding | AS PER RFP |
| 80 | Plug | AS PER RFP |
| 81 | Tie rod end | AS PER RFP |
| 82 | King pin bush | AS PER RFP |
| 83 | Suspension removing the vehicle and taken to the lathe machine shop old bush | AS PER RFP |
| 84 | The old parts removing the vehicle and full suspension removing wheel bearing | AS PER RFP |
| 85 | Armature short new fitted | AS PER RFP |
| 86 | Field coil burning new fitted | AS PER RFP |
| 87 | Brush and brush holder burned new fitted | AS PER RFP |
| 88 | Solenoid short and burned | AS PER RFP |
| 89 | The old parts removing and new parts fitting labour | AS PER RFP |
| 90 | Field coil burning new fitted | AS PER RFP |
| 91 | Armature short new fitted | AS PER RFP |
| 92 | Brush and brush holder burned new fitted | AS PER RFP |
| 93 | Solenoid short and burned | AS PER RFP |
| 94 | The old parts removing and new parts fitting labour | AS PER RFP |
| 95 | Armature short new fitted | AS PER RFP |
| 96 | Field coil burning new fitted | AS PER RFP |
| 97 | Brush and brush holder burned new fitted | AS PER RFP |
| 98 | Solenoid short and burned | AS PER RFP |
| 99 | The old parts removing and new parts fitting labour | AS PER RFP |
| 100 | Armature short new fitted | AS PER RFP |
| 101 | Solenoid short and burned | AS PER RFP |
| 102 | Field coil burning new fitted | AS PER RFP |
| 103 | Brush and brush holder burned new fitted | AS PER RFP |
| 104 | The old parts removing and new parts fitting labour | AS PER RFP |
| 105 | Water pump assy | AS PER RFP |
| 106 | Cabin rod spring assy removing broken spring leaf change and full | AS PER RFP |
