|
| 1 | Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and as directed. . |
| 2 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and as directed. |
| 3 | Demolition ofBrick work or stone/boulder masonry, built in Cementmortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 4 | M&L for Brick work with sub class \"B\" old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6), complete all as specified and as directe. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete walls, finished even and fair without using extra cement to match with the existing surfaces. |
| 6 | M&L for prepration of new surfaces of walls including cornices, plasters etc and applying two coats of cement base paint complete all as specified and as directed.. |
| 7 | M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thickas in sub floors, sub base, hardstanding, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed. |
| 8 | M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed. |
| 9 | Supply & fixing glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as speicified and as directed.. |
| 10 | Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed. . |
| 11 | M&L for coloured chequeredcement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) complete all as specified |
| 12 | M & L for laying 60 mm thick rubber moulded, machine pressed precast concrete interlocking paver block with glosy finishedand shape and size conforming to IS -15658- 2006 of M-40Grade with grey cement andpigmentincluding taking down old stone slab/concrete floor complete all as specified and as directed..complete all as specified and as directed.. NOTE: The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independtly by the GE. |
| 13 | M & L for laying 80 mm thick rubber moulded machine pressed precast concrete interlocking paver block with glosy finished and shape and size conforming to IS -15658-2006 of M-40Grade with grey cement andpigmentincluding taking down old stone slab/concrete floor complete all as specified and as directed..NOTE: The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independtly by the GE. |
| 14 | M & L for 25mm sand cushion, filling 30mm under floors or in foundations including watering and consolidation complete all as specified and as directed. . |
| 15 | M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking/ chequered tiles, bed block concrete.complete all as specified and as directed. . |
| 16 | M&L for 150 mm thick (spread thickness) moorum filling for berms, spread, rolled and compacted to required gradient & camber complete all as specified & as directed. |
| 17 | M&Lfor refixing in repair of rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm/80mm thickness, M-35 grade over andincluding 30mm thick crushed stone sand layer complete all as specified and as directed. |
| 18 | M&L for refixing in repair of coloured chequeredcement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) and making good complete all as specified |
| 19 | M&L forpre castMachine pressed cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)as in kerbs stones and fixingall as per manufacturer instructions etcsize shallbe decided and as directed. by GE |
| 20 | M&L for prepration of old surfaces of brick/concrete/asbestos sheet like kerb stone or any other type of surface including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of synthetic enamel paint complete all as specified and as directed.. |
| 21 | M&L for preparing of new or previously treated road surface and painting lines, dashes, arrows letters etc on road pavements and the like 10cm wide with road marking paint 2.5 mm thick mechnically with white or golden yellow paint including reflecting beads at 250 gms per sqm of surface area and including removal of old loose paint by burning /scraping method complete all as specified and as directed.. Notes:-(i)The thickness 2.5 mm mentioned above is exclusive of the thickness of glass beads as per IRC:35. (ii)The finished surface shall be in uniform level and free from streaks and holes. |
| 22 | S&Fin repair Cat eye solar reflective type of metal road studs high density reflective lens ABS plastic body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.00 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 23 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and as directed. |
| 24 | S&F in Repairs SOLAR DELINEATOR made from polycarbonate and toughened aluminium alloy body.Height- 145mm, diameter - 80mm, Delineator height - 80mm, comprises of 4 super bright LEDs which give 360 degree viewing.Solar Panel - 2.5 V, 120 mm (approx) 1.25 V rechargeable battery - 1 No.Delineator also has high intensity retro-reflective band of 25mm width for extra visibility including post 1000mm x 47mm powder coated MS pipe.Fixing complete all as specified and as directed..Manufactured by \"DARK EYE\" (Model- DA-112). |
| 25 | Supply and fixing in repair Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed. |
| 26 | Manufacturing, supplying and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular /circle /rectangle /square shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 27 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 28 | Supply and installation of road speed breakers made of high‑quality, weather‑resistant rubber/PVC (or asphalt/concrete as specified), designed as per IRC guidelines. Each unit features interlocking modules with reflective strips for enhanced night visibility, skid‑resistant surface for safety, and durable anchoring bolts for secure fixing. Suitable for controlling vehicle speed in high‑traffic and sensitive zones.Specifications:- Dimensions: Height 75–100 mm, Width 350–400 mm per module, Material: Heavy‑duty rubber/PVC / Asphalt / Concrete Color: Black & Yellow with reflective panels, Installation: Bolted to road surface with galvanized fasteners, Compliance: As per IRC:99‑1988 standards and Make : Dark Eye/Greenlite/Vijay complete all as specified and as directed. |
