|
| 1 | Taking down copper/aluminium point wiring ( light, fan, bell,socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc |
| 2 | M & L for surface point wiringwith two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC rectangularswitch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed. |
| 3 | All as per item No 2 abovebut 5 amps socket point independentall as specified and directed. |
| 4 | All as per item No 2 abovebut5 amps socket point on same boardas specified and directed. |
| 5 | All as per item No 2 above buttwo way light point controlled by two way switchall as specified and directed. |
| 6 | All as per item No 2 above butcable of size 2.5 sqmmfor one 16 amps socket (Power) point independentcomplete all as specifiedand directed by Engr-in-Charge. |
| 7 | M&L for point wiring with 1.5Sqmm multistrand PVC insulated unsheathedcopper conductor cable multystand FRLS 1100Voltandincluding PVC concealed conduit ISI marked, wall thickness 2mm medium duty for one light or fan/bell point controlled by one switch including 3mm thick laminated sheet using existing MS/CI sunken box including PVC green insulated 1.5Sqmm solid copper conductor cable contineous earth wire and connecting to earth dolly complete all as specifiedand directed by Engr-in-Charge. |
| 8 | M&L for point wiring with 1.5Sqmm multistrand PVC insulated unsheathed copper conductor cablemulty stand FRLS 1100 Voltand including PVC concealed conduit pipe ISI marked, medium duty for 2-in-one5Amp sswitch socketindependent including 3mm thick laminated sheet using existing MS/CI sunken box including PVC green insulated 1.5 Sqmm multistranded copper conductor cable contineous earth wire and connecting to earth dolly complete all as specifiedand directed by Engr-in-Charge. |
| 9 | M&L for point wiring with 4 Sqmm multistrand PVC insulated unsheathed copper conductor cablemulty stand FRLS 1100 Voltand including PVC concealed conduit pipe ISI marked, medium duty for 2-in-one15Amp sswitch socketindependent including 3mm thick laminated sheet using existing MS/CI sunken box including PVC green insulated 2.5 Sqmm multistranded copper conductor cable contineous earth wire and connecting to earth dolly complete all as specifiedand directed by Engr-in-Charge. |
| 10 | M & L for surface submain wiringwith two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduitsize with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dollyincl dismentling taking down old unserviceable wiring and making good to disturbed surfaces complete all as specifiedand directed by Engr-in-Charge. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. |
| 11 | All as per item No 10.00 above butcable of size 2.5 sqmmcomplete all as specifiedand directed by Engr-in-Charge. |
| 12 | All as per item No 10.00 above butcable of size 4.0 sqmm complete all as specifiedand directed by Engr-in-Charge. |
| 13 | All as per item No 10.00 above but cable of size 6.0 sqmmcomplete all as specifiedand directed by Engr-in-Charge. |
| 14 | All as per item No 10.00 above butcable of size 10.0 sqmm complete all as specifiedand directed by Engr-in-Charge. |
| 15 | S&F5 Amp switch piano type single pole one way incl dismentling taking down unsv one complete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 16 | S&Fbell push piano type one way 240 volt incl dismentling taking down unsv one complete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 17 | S&F5 Amp switch piano type single pole two way incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 18 | S&Fsocket outlet flush type 6 amps, 5 pin, 230v incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 19 | S&Fswitch socket combination multipurpose 2-in-1 flush type 6 amps, 230 v incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 20 | S&Fswitch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 21 | S&F call bell electric, ding dong, AC 240 volt, 50 HZ. incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 22 | S&Flamp Holder insulated body with back plate for batten fitting incl dismentling taking down unsv oneall as specified and as directed. Make - Anchor or equivalent |
| 23 | S& F for modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.Make: Legrand (myrius) cat part No-6730 00 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/SSK |
| 24 | S& F for modular switch 2 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.Make: Legrand (myrius) cat part No-6730 01 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/SSK |
| 25 | S& F for modular Bell push, 5/6 Amps, 1/2 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.Make: Legrand (myrius) cat part No- 6730 19 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/SSK |
| 26 | S& F for modular socket, 5/6 Amps, multi pin (ISI marked) complete all as specified and as directed by Engineer-in-Charge.Make: Legrand (myrius) cat part No- 6730 44 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision) /SSK |
| 27 | S& F for modular switch 1 way, 16 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge. Make: Legrand (myrius) cat part No- 6730 08 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision) /SSK |
| 28 | S& F for modular socket, 6/16 Amps, multi pin (ISI marked).complete all as specified and directed by Engr-in-Charge. Make: Legrand (myrius) cat part No- 6730 45 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/SSK |
| 29 | S&F modular typefan regulator 100W - 2 module complete all as specified and directed by Engr-in-Charge. Make: Legrand (myrius) cat part No- 6730 29 or equivalent of Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/SSK |
| 30 | S&Ffor 2 Modular vesta combine plate regular white size 4.50 X 4.50 BS19104 complete all as specified and directed by Engr-in-Charge. Make: Benlo/ Havells or inequivalent. |
| 31 | S&F 4 Modular vesta combine plate regular white size 4.50 X 7.00 BS19102 complete all as specified and directed by Engr-in-Charge. Make: Benlo/ Havells or inequivalent. |
| 32 | S&F 6 Modular vesta combine plate regular white size 4.50 X 8.50 BS19105 complete all as specified and directed by Engr-in-Charge. Make: Benlo/ Havells or inequivalent. |
| 33 | S&F 10 Modular vesta combine plate regular white size 4.50 X 12.50 BS19107 complete all as specified and directed by Engr-in-Charge. Make: Benlo/ Havells or inequivalent. |
| 34 | S&Fceiling rose surface Bakelite three terminal incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 35 | S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. Make - Anchor or equivalent |
| 36 | S&FMCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No- 4085-87 to 4085-95of Legrand or equivalent of Schneider/ABB. |
| 37 | S&FMCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB |
| 38 | S&FMCB,TP , 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No- 811195 of INDO ASIAN or equivalent of Schneider/ABB |
| 39 | S&FMCB, Four Pole, 40 to 63 amps, 415 Voltsincl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No- 4087-00 to 4087-02 of Legrand or equivalent of Schneider/ABB |
| 40 | Labour for taking down old VTPN/ DBs (4 way/ 6 way/12 way)and repairing, cleaning and refixing of same and making good the disturbed surfaces neat and clean of any size complete all as specifiedand directed by Engr-in-Charge. |
| 41 | S&FSheet metal enclosure two way, incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No-5077 91to -5077 93 of Legrand or equivalent of Schneider/ABB. |
| 42 | S&FMCB distribution board,Double door, metal enclosure, SPN, 230 Volts, 4 way incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge. MAKE- Cat Part No- 5076 10 of Legrand or equivalent of Schneider/ABB |
| 43 | S&FMCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismentling taking down unsv one complete all as specifiedand directed by Engr-in-Charge MAKE- Cat Part No- 5076 11 of Legrand or equivalent of Schneider/ABB |
| 44 | S&FMCB distribution board, Double door, metal enclosure, SPN, 230 Volts,12 way incl dismentling taking down unsv one complete all as specifiedand directed by Engr-in-Charge MAKE- Cat Part No- 5076 12 of Legrand or equivalent of Schneider/ABB |
| 45 | S&FVertical MCB distribution board, as MCB incomer, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge MAKE- Cat Part No- 5077-25of Legrand or equivalent of Schneider/ABB |
| 46 | S&FVertical MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge MAKE- Cat Part No-5077-45 of Legrand or equivalent of Schneider/ABB |
| 47 | S&FMetal plug and socket board with MCB SP 20 amp, 16 KA incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge MAKE- Cat Part No- 5078 11of Legrand or equivalent of Schneider/ABB |
| 48 | S&FHylam Sheet 3mm thick on existing concealled MS/CI ractangular or Square or round box with 04 nos cadmium coated screws and cup washer incl cutting slots for mounting switch/socket/fan regulator/ batten holder etc incl dismentling taking down unsv onecomplete all as specifiedand directed by Engr-in-Charge |
| 49 | S&F LED batten fitting \" 2\"long, 10 watt,CDL230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos incl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge Make-CG Cat Part No- CCS-103-10-65-SL-HL2-DP-NWH or equivalemt in Bajaj/Philips/Havells/Wipro |
| 50 | S&FLED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge. Make-Shakti Fixture Cat Part No SZSLAMX036 or equivalemt in Bajaj/Havells/Philips |
| 51 | S&FLED fitting, 36 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge Make- Shakti Fixture Cat Part No SZSLAMX036 or equivalemt in Bajaj/Havells/Philips |
| 52 | S&FLED building security light 30 watt, 230V with lens and toughen glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge Make- Shakti Fixture Cat Part No SZPSLMPo30-DDS. or equivalent in CG/Wipro/Havells |
| 53 | S&FPDC housingLED Bulk headlightenergy efficient with opal diffuser, equiped with 2 KVin built surge protection withIP65 protection wall mounted LED 10 watt, 230 V complete with all accessories,connecting up to ceiling rose/connector with 0.5 sqmm two core copper flexible conductor cableincl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge. Make- Shakti fixture CP No. SZSBHMXo10. or equivalent in Wipro/CG/Helonix |
| 54 | S&F in replacement ofLEDpost top lantern 20 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl1.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge. Make: Shakti fixture. Cat part No SZPGPMX040-iss. or equivalent in Philips, Wipro |
| 55 | S&F LED aesthetically designedfrosted glass with chrome finishwall lampwith B27 LED 7 Watt lampincl dismentling taking out unsv bracket complete all as specifiedand directed by Engr-in-Charge.Make- JaguarCat Part No JNL-CHR-MB160275542A or equivalent to wipro/ Bajaj |
| 56 | Taking down and servicing of ceiling fan1200/1400 mm sweep and Exhaust fan 250/300mm sweep at site of each qty and removing of old grease from bearing of ceiling fan and re-filling new grease including replacement of worn out nut bolt,and re-assembling the fan and Exhaust fan complete all as specifiedand directed by Engr-in-Charge |
| 57 | REPAIR TO CEILING FANS WITH FOLLOWING ITEMS OF WORK :-M&L for Rewinding of Ceiling fan 1200/1400 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, assemble of rotor and stator unit with capacitor, connecting wire, down rod, blades and testing complete all as specifiedand directed by Engr-in-Charge.Note: 1. Contractor will collect fans from the complaint cell of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply & Fixing only.3. Cost of Connector bock and capacitor holder shall be inclusive of the quoted rate. |
| 58 | All as per item No- 57.00 abovebut for Exhaust fan 250/300 mm sweep industrial type complete all as specifiedand directed by Engr-in-Charge |
| 59 | S&F ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC complete all as specifiedand directed by Engr-in-Charge |
| 60 | S&F G.M. Bush bearing for ceiling fan as per existing pattern complete all as specifiedand directed by Engr-in-Charge |
| 61 | S&F capacitor AC for 230 volts 50 Hz of capacity 2.0/2.25/2.5 Mfd. complete all as specifiedand directed by Engr-in-Charge |
| 62 | S&F capacitor AC for 230 volts 50 Hz of capacity 3.15/4.0 Mfd. complete all as specifiedand directed by Engr-in-Charge |
| 63 | S&F canopy for ceiling fan as per specified and directed complete all as specifiedand directed by Engr-in-Charge |
| 64 | S&F metal ceiling fan clamp all as specified and directed complete all as specifiedand directed by Engr-in-Charge |
| 65 | S&F down rod for ceiling fan as per existingcomplete all as specifiedand directed by Engr-in-Charge |
| 66 | S&F hanger bracket for 1200/1400 ceiling fan any type complete all as specifiedand directed by Engr-in-Charge |
| 67 | S&F Blade for 1200/1400 ceiling fan any type complete all as specifiedand directed by Engr-in-Charge |
| 68 | Painting of ceiling fan 1200/1400 mmincluding scrapping, cleaning and removing dust from the blade an body and applying two coat of enamel paint over & one coat of primer complete all as specifiedand directed by Engr-in-Charge |
| 69 | S& F in repair of exhaust fand 300 mm PVC body, 230 volincl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge Make Bajaj or equivalent Note -:( old UNSV PVC exhaust fan deposite at MES complaint cell) |
| 70 | Supply and fix in repair of exhaust fan 300 mm sweep, metal body with louvers, 230 voltsincluding dismantling / taking down un serviceable fan of any typecomplete all as specifiedand directed by Engr-in-Charge.Note -:( old UNSV exhaust fan deposite at MES complaint cell)MAKE :- Havells / Usha. |
| 71 | Supply and fix in repair Wall fan 450 mm sweep, 3 speed control ,PVCbody230 volts complete all as specifiedand directed by Engr-in-Charge. Note -:( old UNSV Wallfan deposite at MES complaint cell) MAKE :- Havells / Usha. |
| 72 | Supply and fixing LED Recess mounting 2ft X 2ft 1x 36 watt smart slim edge colour temperature, CCT controllable 2x2 LED lighting with remote control with dimming and CCT change option from 2700K to 6500K. housing made from powder coated, CRCA sheet, opaque diffuser for glare free and optimum light with complete accessories complete all as specifiedand directed by Engr-in-Charge. Make. Halonix Cat part NO. HLCR22-BO01-36-CW or Techno commercial Equivalent inwipro/philips/Havells. |
| 73 | S&FPVC insulated PVC sheathed copper flexiable wire multistrand 1.5 sqmm 3 core, ISI marked complete all as specifiedand directed by Engr-in-Charge |
| 74 | S&FPVC insulated PVC sheathed copper flexiable wire multistrand 4sqmm 3 core, ISI marked complete all as specifiedand directed by Engr-in-Charge |
| 75 | Taking down carefully storage type water heater (Geyser) after disconnecting inlet/outlet/vent pipes, electric/earth connections etc cleaning of the body inlet/outlet/vent pipes stop cocks non return valves etc leakage arresting of inner copper/steel tank by welding/brazing etc reassembling the geyser by replacing gaskets worn out nuts washers etc prefixing the same in position by replacing mounting bolts and nuts reconnecting all inlet/outlet/vent pipes electric/earth connections and carrying out testing for proper functioning complete all as specifiedand directed by Engr-in-Charge for geyser of capacity. Note :Non return valve stop cock, PVC/Copper connections cable , thermostat etc shall be measured separately. |
| 76 | (a) All as per item No- 75 abovebut for25 liters capacity |
| 77 | (b) All as per item No- 75 abovebut for 50 liters capacity |
| 78 | Supply and replace heating element of storage type water heater of compatible type including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements all as directed by Engineer-in-Charge of capacity ISI Marked : Make : DITZ or equivelent make. |
| 79 | (a) All as per item No-78.00 abovebut for1.5 Kilo Watt Capacity |
| 80 | (b)All as per item No- 78.00 abovebut for2.0 Kilo watt capacity |
| 81 | S&F thermostat suitable for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge. Make : DITZ or equivelent make. |
| 82 | S&F non return valve (gun metal) of following sizes including removal of old ones:- |
| 83 | (a) All as per item No- 82 abovebut for Suitable to 15mm bore |
| 84 | (b) All as per item No- 82 abovebut for Suitable to 20mm bore |
| 85 | S&Fin repair of aparatus plate suitable for vertical/horizintal type Geyser 25 or 50 ltr cap complete all as specifiedand directed by Engr-in-Charge. |
| 86 | S&Fin repair heavy duty PVC connections pipe with brass hexagonal adoptersat both side 15mm dia and 450 mm long for hot /cold water complete all as specifiedand directed by Engr-in-Charge. |
| 87 | M&L for testing of earth resistance value of building earth for electrical purpose, using analog/digital earth resistance tester by suitably inserting spikes as per norms and recording earth resistance value of building in presence of MES Rep and User rep and submission of recorded value in form of hard copy duly signed complete all as specifiedand directed by Engr-in-Charge. |
| 88 | M&L for replacement of old unsv LT meter panel boad factory made CPRI approved indoor typewall mounted, self supporting, compartmentalised, design of suitable size not lesss than 1.50x1.20x0.3 mtr, 440 volts, 3 phase 4 wire system powder coating provided with suitable to make it dust/vermin proof. The panel shall be made with 2mm thick CRCA sheet for outer shell and inner shell made out of 1.6mm thick CRCA sheet, double door with front openable with locking arrangment, provision of threaded earthing stud at bottom, inner shell be compartmentalised, front openable single door system lockable. Inner shell completely verminproof & to accommodate incoming/outgoing MCCB\"s, MCB\"s and TPN aluminium bus& extension links. Aluminium bus bar of capacity 200amps, 4 Nos, including neutral duly insulated with colour coded heat shrinkable sleeve & shall be mounted on suitable size/rating of epoxy resin insulator all housed in suitable bus bar chamber complete all as specifiedand directed by Engr-in-Charge. |
| 89 | All control wires shall be with 2.5 sqmm multistranded copper conductors & shall be properly bunched, tied, ferrulled for proper identification & crimped with adequate size of lugs & provision & fixing of digital voltmeter, ammeter with built in selector swich, CTs of suitable ratio, and pilot indication lamp complete alongwith provision of necessary cable entries/exit boxes for all incoming & out going cables with suitable size of cable glands etc. Computer cut shelf adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided. The panel shall consist of following accessories:-(i) Incomer(a) MCCB FP, 16 KA rapturing capacity 63 amps, ics=100% of icu, thermal magnetic setting including connection with bus bar - 1 No(ii) Out going (a) MCB SPN 32 Amp 10 KA \"B\" curve - 09 Nos (b) MCB SPN 10 Amp 10 KA \"B\" curve - 01 No(c) Digital voltmeter AC 50Hz, 0 to 500 volts of size 96x96 mm flush mounted three phase energy accuracy class 1.0 including inbuilt selector switch - 01 No.(d) Digital ammeter AC 50Hz, 0 to 80 amps of size 96x96 mm, flush mounted three phase energy accuracy class 1.0 including inbuilt selector switch & suitable ratio of CTs complete - 01 No. (e) LED type RYB phase indicator lamp with back up HRC fuse - 01 set(f) Suitable space for fixing 9 Nos single phase electric energy meter. |
| 90 | All as per item No 86.00 abovebut Ten Electric meterwith following items complete all as specifiedand directed by Engr-in-Charge. (i) Incomer(a) MCCB FP, 16 KA rapturing capacity 63 amps, ics=100% of icu, thermal magnetic setting including connection with bus bar - 1 No (ii) Out going(a) MCB SPN 32 Amp 10 KA \"B\" curve - 10 Nos(b) MCB SPN 10 Amp 10 KA \"B\" curve - 01 No(c) Digital voltmeter AC 50Hz, 0 to 500 volts of size 96x96 mm flush mounted three phase energy accuracy class 1.0 including inbuilt selector switch - 01 No. (d) Digital ammeter AC 50Hz, 0 to 80 amps of size 96x96 mm, flush mounted three phase energy accuracy class 1.0 including inbuilt selector switch & suitable ratio of CTs complete - 01 No.(e) LED type RYB phase indicator lamp with back up HRC fuse - 01 set (f) Suitable space for fixing 10 Nos single phase smart energy meter. |
| 91 | S&FMCB distribution board,single door, metal enclosure for fixing ofMCCB 2 Pole 10 Amp. 230 Volts,2 way incl dismentling taking down unsv one complete all as specifiedand directed by Engr-in-Charge.MAKE- C&S or equivalent of Schneider/ABB |
| 92 | M&L RCCB 2 pole 30mA10 Amp 10KA ISI/CE marked as per IS/IEC degree of protection IP20 rated conditional short circuit current,Icc 10KA 50 Hz operating voltage 240AC complete all as specifiedand directed by Engr-in-Charge.:- Cat Part No-CSRB2P10A30-10kA of C&S or equivalent of Schneider/ABB |
| 93 | M&L for earthing with GI earth plate electrode 60cmx 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by using GI Strip 32 x 6mm as earthing lead(upto the test point ) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm diaGI pipe connected to test point GI pipe light grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 2009(Part-I) with accessories complete all as specified and as directed by Engineer-in-charge. |
| 94 | M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade,2.5 mtr longburied directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 04 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI lead 04mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on complete all as specifiedand directed by Engr-in-Charge. |
| 95 | S&F forrecess slimLED square downlighter, 15 watt , suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismantling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge. MAKE :- CG Cat Part No LSDEP-15-CDL or techno commercial equivalent in Wipro/Havells |
| 96 | S& F in repair of exhaust fand 200 mm PVC body, 230 volincl dismentling taking down unsv fitting any type complete all as specifiedand directed by Engr-in-Charge.Note -:( old UNSV PVCexhaust fan deposite at MES complaint cell) |
| 97 | S& F forround shaped recess mounted LED Flat panel down lighter, 12 watt, suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismantling taking down unsv fitting any type all as specifiedand directed by Engr-in-Charge. MAKE :- Wipro Cat Part No LD06-151-XXX-57-XX or techno commercial equivalent in Philips/Havells |
