|
| 1 | Supply, fix and installation ofLED Glow sign board \"WATER SUPPLY RECEIVING CENTER FROM KMC\" made of 6mm thick ACP board of size 1.50m x 1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50mmx50mmx1.8mm with suporting tubes of size 50mmx50mmx1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate ) of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 2 | Supply, fix and installation ofLED Glow sign board \"6 KV MAIN RECEIVING STATION\" made of 6mm thick ACP board of size 6.00m x 6.00m & solid acrylic letter of size 75x75mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm board fixed on wall with L-clamp & bolts complete including necessary electrical wiring upto the board complete as specified and directed. |
| 3 | Supply, fix and installation ofLED Glow sign board \"11 KV MAIN RECEIVING STATION \" for Jaffarpore made of 6mm thick ACP board of size 6.00mx6.00m & solid acrylic letter of size 75x75mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm Board fixed on wall with L-clamp & bolts complete including necessary electrical wiring upto the board complete as specified and directed. |
| 4 | Supply, fix and installation ofLED Glow sign board \"MES COMPLAINT CELL (E/M)\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1(using 20 mm graded stone aggregate ) of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 5 | Supply, fix and installation ofLED Glow sign board \"ASSITANT GARRISON ENGINEER (E/M)\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate ) of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 6 | Supply, fix and installation ofLED Glow sign board \"SWIMMING POOL AF STN BKP MES\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate )of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 7 | Supply, fix and installation ofLED Glow sign board \"ASSITANT GARRISON ENGINEER (B/R)\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate )of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 8 | Supply, fix and installation ofLED Glow sign board \"MES COMPLAINT CELL (B/R)\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate )of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 9 | Supply, fix and installation ofLED Glow sign board \"ELECTRIC & WATER SUPPLY INSTALLATION LOS DUM DUM\" made of 6mm thick ACP board of size 1.50mx1.50m & solid acrylic letter of size 50x50mmx 6mm including LED light with SMPC steel framing complete. The letter and ACP board mounted in steel frame of hollow section sqaure tubes of size 50x50x1.8mm with suporting tubes of size 50x50x1.8mm of 4.5 m length on both sides of board fixed in PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate )of size 0.4mx0.4mx0.4m including necessary earth work, electrical wiring work upto the board complete as specified and directed. |
| 10 | Supply, fix and installation of main entrace gate LED sign board piller made out of exterier ACP board of 6mm thick around the piller in square shape of size 0.6mx0.6m and 5 m height in interval of 50mm bi-coulor biding on both sides piller. Pilllers shall be made with hollow square section tube of size 60x30x1.8mm thick -06 Nos upto 5 m height in span of 1 m section joint of 6 pipes of 0.6x0.6m for interconnection of each other jionted with welding/ soldering work as required including LED Glow sign board \"GARRISON ENGINEER (AF) BARRACKPORE\" with MES logo made on exterier ACP board of size 0.75m x0.75m x 4 m placed letter in framing of 0.45m x0.45m x25mm letter in male female Stainless Steel letter in build module light and SMPC single side including necessary PCC foundation (1:3:6) type C1 (using 20 mm graded stone aggregate ) with base plate & nut bolt, earth work, electrical wiring work upto the board complete as specified and directed. |
| 11 | Supply, fix and installation of colour changing LED based 12V input, RES RGB 14W, IP-68 protected, aluminium housing, LED underwater fountain lights with 9 HI-power LEDs along with 1 meter standard copper cable including taking down existing light of any type complete as specified and directed. |
| 12 | Supply, installation and commissioning of linear series foam jet fountain consistingof following accesssories: - (a) 3 Phase mono-block submersible pump set, 5Hp, 415V AC, suction x delivery 80mmx80mm, cast iron body with 3.7 KW power consumption - 01 No. Make : Kirloskar, Model No- KOS-520 or equivalent model of make Crompton Greaves /KSB.(b) Outdoor type control panel box of suitable size made of 3.15mm thick MS sheet with powder coating, comprising the accessories of suitable capacity :- (Voltmeter- 1 No, Ammeter- 1 No, Contactor- 1 No, Single phase preventer- 1 No,MCB- 1 No, On /off push button switch- 1 No) - 01 Set.(c)25mm dia brass foam nozzle wih ball joint - 09 Nos.(d) Colour changing LED based 12V input, RES RGB 14W, IP-68 protected, Aluminium housing, LED underwater fountain lights with 9 HI-power LEDs along with 1 meter standard copper cable- 09 Nos.(e) SMPS LED power supply & RGB Controller - 01 Set.(f) Interconnecting UPVC pipe & pipe fitting along with control valve of suitable size- 01 Set.(g) 2.5 sqmm 3 core submersible copper flat cable for electrical connection of pump - 25 meter.(h) 1.5 sqmm 4 core copper round cable electrical connection of light- 25 meter.(i) Ring stand, light stand along with required electrical & hardware fitting - 01 Set. |
| 13 | Supply, installation and commissioning of linear series dome water fountain consistingof following accesssories: -(a) Mono-block submersible pump set, 2HP, 415V AC, suction x delivery 65mmx50mm, cast iron body with 1.5 Kw power consumption - 01 No.Make : Kirloskar Model KOS-216 or equivalent model of make Crompton Greaves /KSB.(b) Outdoor type control panel box of suitable size made of 3.15mm thick MS sheet with powder coating with comprising the accessories of suitable capacity: -(Voltmeter- 1 No, Ammeter- 1 No, Contactor- 1 No, Single phase preventer - 1 No, MCB- 1 No, On /off push button switch- 1 No) - 01 Set. (c) 7.5\" diameter GI ring with 47 Nos brass adjustable ring jet nozzle - 01 Set.(d) Colour changing LED based 12V input, RES RGB 14W, IP-68 protected, aluminium housing, LED underwater fountain lights with 9 HI-power LEDs along with 1 meter standard cable - 10 Nos.(e) SMPS LED power supply & RGB controller - 01 Set.(f) Interconnecting UPVC pipe & pipe fitting along with control valve of suitable size - 01 Set. (g) 2.5 sq mm 3 core submersible copper flat cable for electrical connection of pump - 35 meter.(h) 1.5 sq mm 4 core copper round cable electrical connection of light - 35 meter.(i) Ring stand, light stand along with required electrical & hardware fitting - 01 Set. |
| 14 | Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder panel board of size(CPRI Approved), outdoor type, double door,factory made out of 3.15 mm thick MS sheet of size 1.5 m x 1.00 m x 0.5 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom completeincluding painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1 with danger notice plate of 1.60mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete including necessary excavation work for taking out cable loop and refilling the trenches and comprising of the following accessories:-(a) Anodized Copper Bus bar of capacity 200 Amps- 04 Nos.(b) MCCB 63 Amps, fixed Thermal and Megnetic release type 415 volts 4 Pole, 36 KA -01 No. (In coming)(c) MCCB 32 Amps, fixed Thermal and Megnetic release type 415 volts 4 Pole, 16 KA -01 No. (Out going)(d) Indicating lamp LED type (set of three Red, Yellow, Blue) - 01 Set.Note :- (i) Drawing of LT Panel and make of items shall be get approved from GE before ordering the panel. (ii) Cost of lugs for cable and cable gland etc also included in the quoted rate. (iii) Rotary handle to be provided for all MCCB for control and operation of MCCB. (iv) The rating of copper bus bar to outgoing MCCB /MCBs shall not less than 1.5 times the rated current of indiviual outgoing feeders / MCCB. (v) Spreader terminals and phase barriers to be provided with all MCCBs. (vi) Quoted rate shall be included for refixing of all cables in panel and dismantled & taking out from old unserviceable panel.(vii) Quoted rate shall be included for taking down existing unserviceable panel from site. |
| 15 | Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel,protected by 40 mm bore HDPE pipe of pressure rating 6 kgf/sqcm allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 15 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion and including taking down existing earthing sets complete all as specified and directed.Note:- GI strip upto 7.5m length including testing shall be included in quoted rates. |
| 16 | Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth wire of size 4mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel,protected by 20 mm bore HDPE pipe of pressure rating 6 kgf/sqcm allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 15 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion and including taking down existing earthing sets complete all as specified and directed.Note:- GI strip upto 7.5m length including testing shall be included in quoted rates. |
| 17 | Supply and fix in repair 15mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 18 | Supply and fix in repair 20mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 19 | Supply and fix in repair 25mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 20 | Supply and fix in repair 40mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 21 | Supply and fix in repair 50mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 22 | Supply and fix in repair 100mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, shortpieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches complete all as specified and directed. |
| 23 | Material and labour for construction of brick masonry valve pitof size 1200x1200x1200mm (internal dimension) with one brick thick masonary work in CM (1:4), PCC (1:4:8) type D-2 (using 40mm gradedstone aggregate) as in foundation concrete including PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in bedding and coping 10mm thick cement plaster incement mortar (1:4) internally and externally upto 15 cm below ground level providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-1 (using 20mm gradedstone aggregate) of size 230 x200 x100mm. including provision of hinges welded with angle iron frame and mild steel cover 3 mm thick, mild steel handle of suitable and size welded with mild steel cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red-oxide primer including necessary excavation work in soft/ loose soil including dismantling of unserviceable existing valve pit complete all as shown in Drawing No AF/TD/240/15 of sheet 1/2 & 2/2 and directed. |
| 24 | Taking out burnt submersible pumping set of capacity 5 HP to 10 from fountain, including disconnecting of electric cable from the panel board by dismantling of pipe complete all as specified and directed. |
| 25 | Taking out the fountain pump from the motor and opening of submersible pump of capacity 5 to 10HP for repair and replacement of unserviceable parts including re-fixing of the same including testing and commissioning after repair complete all as specified and directed.Note:- Spare parts shall be measured and paid separately under respective items as supply only. |
| 26 | Supply only impeller |
| 27 | Supply only impeller bush. |
| 28 | Supply only oil seal . |
| 29 | Supply only shaft nut. |
| 30 | Supply only stuffing box bearing of pump |
| 31 | Material and labour for rewinding of fountain submersible motor of capacity 5HP to 10HP with super enameled copper wire including removing burnt winding cleaning of slots separation of rotor and stator making insulation to all joint including replacement of the unserviceable parts of motor including testing and commissioning after repair complete all as specified and directed.Note:- Spare parts including copper winding wire shall be measured and paid separately under respective items as supply only. |
| 32 | Supply only bearing bush upper. |
| 33 | Supply only bearing bush lower. |
| 34 | Supply only oil seal . |
| 35 | Supply only super enameled copper winding wire of suitable guage |
| 36 | Supply and fix in repair direct-on-line startersin sheet-steel enclosure type MKI suitable for motor rating 5 HP,AC-3 duty, 415V, 50Hz for three phase supply complete all as specified and directed. |
| 37 | Supply and fix in repair direct-on-line startersin sheet-steel enclosure type MKI suitable for motor rating 10 HP,AC-3 duty, 415V, 50Hz for three phase supply complete all as specified and directed. |
| 38 | Supply and fix in repair 6 sqmm, 3 core flat copper submersible cable, PVC insulated, PVC sheathed ,1100 volt complete all as specified and directed. |
| 39 | Supply and fix in repair 4 sqmm, 3 core flat copper submersible cable, PVC insulated, PVC sheathed ,1100 volt complete all as specified and directed. |
| 40 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits manholes, pier holes, laying of cable etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 41 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 42 | Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 43 | Material and labour for sand cushioning with clean and dry river sand for protection of PVC cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and as directed. Note:- Punned down thickness shall be measured for payment. |
| 44 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 45 | Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor)of size 16 Sqmm, 4 core, 1100 Voltsgrade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed.Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item. |
| 46 | Supply, installation, testing and commissiong of 3 phase neutral, 415 volts indoor type, wall mounted panel of size 1000 mm x 800 mm x 200mm (CPRI approved)weather proof, made out of 2.00 mm thick CRCA sheet, detachable gland plate at top/bottom of 2mm thick CRCA sheet, with anticorresive coating and finally epoxy polyester powder coating with pure polyster simens grey structural RAL-7032 shade andduly grouted in wall with the help of cement screw/nuts & Bolts protection class IP-66 fully compartmentalize design with 04 Nos of busbar made of copper ETP grade suitable for 300 Amp (size of copper strip should not be less than 25 x 6 mm for each phase and neutral) pre-wired with suitable size of copper strip / copper wire with colour code for connecting out going MCCB/ MCB\"s, including suitable aluminium earth strips conforming to IS with danger notice plate, necessary cable glands, cable connection with proper lugs, making electrical connection and circuit wiring to TPN DB. The Indoor panel shall be fixed with following accessories :(i) Incoming - (a) MCCB 200 Amp rating , 4 Pole , 415V, AC, 50 HZ, thermal release range Amp with adjustable overload setting and short circuit setting, Ics-100% Icu, service breaking capacity 36 KA - 01 No.(ii) Outgoing- (a) MCCB 100 Amp rating, 4 Pole, 415 V, AC , 50 HZ, thermal release rangeAmp with adjustable overload setting and short circuit setting, Ics-100% Icu, service breaking capacity 25 KA - 03 Nos.(b) Digital voltmeter 0-500 V with selector switch - 01 No. (c) Digital Amp meter 0-100A with set of current transformer of suitable rating and selector switch - 01 No. (d) Indicator lamp (RYB) LED type - 01 set.(e) Current transformer 200/5 Amp - 03 Nos.(f) MCB, SP, 6-32 Amp, 10KA for protection and controlling - 03 Nos. Note :- (i) Drawing of LT Panel and make of items shall be get approved from GE before ordering the panel.(ii) Cost of lugs for cable and cable gland etc also included in the quoted rate. (iii) Rotary handle to be provided for all MCCB for control and operation of MCCB. (iv) The rating of copper bus bar to outgoing MCCB /MCBs shall not less than 1.5 times the rated current of indiviual outgoing feeders / MCCB. (v) Spreader terminals and phase barriers to be provided with all MCCBs. (vi) Quoted rate shall be included for refixing of all cables in panel and dismantled & taking out from old unserviceable panel. (vii) Quoted rate shall be included for taking down existing unserviceable panel from site. |
