|
| 1 | Excavation for foundations, substructures, basements, tanks, sumps,walls, chambers, manholes, trenches, poles, pits & general buildingworks in all types of soils, vegetable earth, soft murum, running sand,shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/marshy/ slushy soil, marine clay, reclaimed land etc. for depths/liftsupto 1.5M measured from the ground level |
| 2 | Nominal Mix of 1:2:4walls, chambers, manholes, trenches, poles, pits & general buildingworks in all types of soils, vegetable earth, soft murum, running sand,shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/marshy/ slushy soil, marine clay, reclaimed land etc. for depths/liftsupto 1.5M measured from the ground level |
| 3 | Providing Detaline Fabricating |
| 4 | Providing and Fixing MS Safety grill of weight specified below forwindows as per design including fabricating the grill using M.S.square / round bar, flats and angles including painting with one coatof red oxide zinc chromate primer and two coats of syntheticenamel paint of approved colour and brand etc complete asdirected. |
| 5 | Providing and fixing rolling shutters made out of 18 gauge steel sheets for curtains, including bottom rail, 100 mm wide guide channels for opening width up to 4.0m and 150mm wide guide channel for opening width more than 4.0m, lock plates, lockingarrangement on both sides, fixing bolts, pulling handles, MS hoodof appropriate size, rolling arrangement, standard make springs inbrackets etc. including fixing of frames with rag bolts, grouting ofparts in position etc. and also including two coats of red oxide zincchromate primer and two coats of synthetic enamel paint ofapproved colour, shade and brand etc. complete as per IS:6248 /specifications and as directed by Engineer In Charge. The shuttershould withstand wind pressure of 47meters per second. |
| 6 | Providing and fixing in position UV resistant, fire retardant, virtuallyunbreakable and temperature resistant (-40° C to +130° C)Polycarbonate corrugated sheet of 2mm thickness for roof of approvedmake to match the roof profile at any height with G.I. J hooks bolts ofG.I. clamps nuts & bolts or with self drilling fastener and EPDM washeretc. complete as directed. |
| 7 | Nominal Mix of 1:3:6 (1 Cement OPC: 3 coarse sand : 6graded stone aggregate 20 mm nominal size). |
| 8 | Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filledwith small chips including filling in with good quality murum brought fromoutside, compacting with iron rammers, watering, sand spreading 12mmthk. layer of grit on top etc complete as directed by Engineer In Charge.(Note: The rate includes the royalty and other taxes if any) |
| 9 | Providing and Fixing collesible gate Please Enable Macros to View BoQ information |
