|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Coarse sand (zone III) |
| 4 | Portland Cement |
| 5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 6 | Vibrator (Needle type 40 mm) |
| 7 | Sundries |
| 8 | Stone Aggregate(single size): 10 mm nominal size |
| 9 | Laterite stone of size 35x20x20cm |
| 10 | wall form panel 1250x500 mm |
| 11 | Corner angle 45x45x5 mm 1.50 m long |
| 12 | 100 mm channel shoulder 2.5 m long |
| 13 | Double clip (bridge clip) |
| 14 | Single clip |
| 15 | M.S. Tube 40 mm dia |
| 16 | Structural steel such as tees, angles, channels and R.S. joists |
| 17 | Red oxide Zinc chromate primer |
| 18 | Adjustable span ESO+SI (2.35-3.40) |
| 19 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 20 | Beam clamp 300-380 mm (450-1070 mm) |
| 21 | Wall form panel 1250x450xmm |
| 22 | Corner angle 45x45x5 mm 2.50 long |
| 23 | Column clamp 450x1070 mm |
| 24 | Prop 2 m (2-3.5m) |
| 25 | Second class kail wood in planks |
| 26 | Second class kail wood in scantling |
| 27 | Hollock ballies 125 mm diameter |
| 28 | Twisted steel/deformed bars |
| 29 | Solid blocks of size 40x20x15cm |
| 30 | Fine sand (zone IV) |
| 31 | Anjili wood scantls |
| 32 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 33 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 34 | Bright finished or black enameled mild steel screws 40 mm |
| 35 | Bright finished or black enameled mild steel screws 20 mm |
| 36 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 37 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 38 | 50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 39 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 40 | Flats up to 10 mm in thickness |
| 41 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
| 42 | Oxidised mild steel screws 30 mm |
| 43 | Iron hooks & eyes 100 mm |
| 44 | 200 mm Aluminium aldrop |
| 45 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
| 46 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 47 | Chromium plated Brass screws 25 mm |
| 48 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 49 | Neoprene / EPDM rubber gasket |
| 50 | 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 51 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 52 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 53 | Aluminium T or L Sections |
| 54 | Chromium plated Brass screws 20 mm |
| 55 | Powder coating 50 microns on aluminium sections |
| 56 | Mild Steel round bar above 12 mm dia |
| 57 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 58 | Top cover for rolling shutters 1.25 mm thick |
| 59 | 27.5 cm long wire spring grade no 2 for rolling shutters Please Enable Macros to View BoQ information |
