|
| 1 | Schedule \"A\" Part-I(BUILDING WORK) |
| 2 | Construction of Block of LPG Store Building (Single Storey) including all fittings & fixtures etc. complete all as shown in drawings and as specified. |
| 3 | Schedule \"A\" Part-II(EXCAVATION AND EARTH WORK) |
| 4 | Lump sum price worked out by contractor for\"EXCAVATION AND EARTH WORK\" as listed inSchedule \"A\" Part-II. |
| 5 | Schedule \"A\" Part- III(ROAD /PATH/CULVERT) |
| 6 | Lump sum price worked out by contractor for\"ROAD/PATH/CULVERT\" as listed inSchedule \"A\" Part- III. |
| 7 | Schedule \"A\" Part- IV(EXTERNAL ELECTRIC SUPPLY) |
| 8 | Lump sum price worked out by contractor for\"EXTERNAL ELECTRIC SUPPLY\" as listed inSchedule \"A\" Part- IV. |
| 9 | Schedule \"A\" Part- V(FENCING & GATE) |
| 10 | Lump sum price worked out by contractor for\"FENCING & GATE\" as listed inSchedule \"A\" Part- V. |
| 11 | Schedule \"A\" Part- VI(HARD STANDING FOR ALARAM SYSTEM) |
| 12 | Lump sum price worked out by contractor for\"HARD STANDING FOR ALARAM SYSTEM\" as listed inSchedule \"A\" Part- VI. |
| 13 | Schedule \"A\" Part -VII(MISCELLANEOUS ITEMS) |
| 14 | M&L for road bore hole/taking down interlocking tiles for crossing UG cable through GIpipe including making good the disturbed surface by filling mass concrete/relaying of interlocking tiles complete all as specified and directed by Engr-in-Charge |
| 15 | M&L for sub class \"B\" brick forprotection ofUG cable including taking down broken brickscomplete all as specified and directed by Engr-in-Charge |
| 16 | S & F street light pole box (SMC) typesuitable for fixing on LT pole size 30cmx25 cmx15cm with side hinged door and locking arrangment and suitable for terminal single phase including MCB 6-10A SP and fixing in position with nut, bolt, clamp, disconnection and reconnection of service wire/UG cabel in boxincl dismentling old street pole boxall as specified and directed. |
| 17 | M & L for street light bracket, made out of 40 mm dia GI pipe, (medium grade) 1.5 metre long bend to shape as requiredwith nut bolt and clampand fixing in positionincl dismentling taking down unsv complete all as specified and directed. |
| 18 | Supply & fix of LED 70W street light, aesthetically designed roadway luminiare with excellent thermal management, pressure die-cast aluminium alloy for housing (heat sink) with epoxy powder coated with high efficiency long life LED chip inbuilt with electronic driver with APFCand includingtaking down old street light fitting with bracket of any type and from any position. |
| 19 | S & F of outdoor feeder pillar box fabricated fromfactoryof overall size 750 mm (L) x 500 mm (b) x750 mm (H)made with 3 mm thick CRCA sheet with hinged door front and rear locking arragements for each cabinet, including painting with super enmaled paint of two coat over a coat of red oxide primer and black at bottomafter antirusttreatment of CRCA sheet of outer sheetand 2 mm thickness of internal sheettop cabinet with incoming 3 phase& neutral and bus bar rating current 1.5 times withIP 65 protection.The feeder pillar shall be provided with two Nos of earth terminal hinged door, front and rear door withlocking arrgagement suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 Cycles, AC suppply, LT danger noticeplate front and rear, The panel shall be rest on iron angle frame size 50x50x5 mmand embedded 300 mm below ground level in PCC 1:2:4 Type B-1 using 20 mm grade stone aggregate, 500 mm above ground levelcomplete all as directed by Engr-in- Charge with follwoings :-IncomerMCCBFP 63 Amp -01 ,16 KAOutgoing (a) MCB DP 32 Amp, 10 KA- 02 No(b) LED type indicator lamp -set of three -01(c) Internal wiring with suitable size(d)Selector switch with assembly - set of two -01(e) Ameter 0-200 Amps-01 No(f)Voltmeter 0-500 Volts - 01 No(g) Digital Timer - 01(j) Contactor 10 Amp -01 |
