|
| 1 | Supply, Installation,commissioning and testing ofApollo - TD1 or equivalent addressable single loop fire alarm repeater panel with primary supply voltage 230volts AC (max upto 260 volts) and secondary supply upto voltage 30 DC, the panel should be competable in operating temperature upto 50 degree centigrate and operating humidity level less than 95 % (non condensed) with graphic touch LCD display complete including dismantling the old panel complete all as specified and directed. Note :- (i) The panel should be as per the OEM recommendations.(ii)Site inspection for maintenance of Fire alarm system is necessary before quoting the tender. |
| 2 | Supply and FixApollo or equivalent addressable smoke detector complete including dismantling the old unsv smoke detector complete all as specified and directed. |
| 3 | Supply and FixApollo or equivalent addressable manual Call point including dismantling the old unsv call points complete all as specified and directed. |
| 4 | Supply and FixApollo or equivalent addressable sounder complete including dismantling the old unsv sounders complete all as specified and directed. |
| 5 | Supply and FixAgni/System sensor/Zicom smoke detector completeincluding dismantling the old Smoke detector complete all as specified and directed. |
| 6 | Supply and FixRavel/Agni/Zicom system sensor manual call pointcompleteincluding dismantling the old Call point complete all as specified and directed. |
| 7 | Supply and FixAgni/Zicom system sensor sounder cum flasher completeincluding dismantling the old sounders /flashers complete all as specified and directed. |
| 8 | Supply and Fix12 volt 7 AH/10AH battery completeincluding dismantling the old batteries complete all as specified and directed. Make:- EXIDE/AMARON. |
| 9 | Supply, Installation,commissioning and testing of Ravel/Agni(RE-102/104), 4 zone microprocessor based Conventional Fire alarm control panel. The panel is capableto operate conventional input devices such as 2 wire smoke detectors , pull stations and other normally open contact devices. The out puts include notification appliance circuits(sounders) , Three form C relays 2 for alarm, 1 for fault and RS485 port to interface with remote annunciator (optional). It supervises all wiring, AC voltage and battery level. complete including dismantling the old panel complete all as specified and directed. The panel comprises of the following Features:-(i)Operates on 220 volts , 50 Hz AC supply(ii)Stand by battery back up with built in charging(iii)Low battery visual warning with audiable tone(iv)Zone isolation facility with loop voltage cut off(v)16X2 LCD display and Error free Fire/Fault status in unambiguos colored LED indication.(vi)Programmable auto silence and Key pad lock.(vii)Compatible to all types of conventional detectors |
| 10 | Supply, draw, connecting, testing and commissioning in repair 2 core 1.5 sq mm stranded copper conductor, PVC insulated PVC sheathed FRLS, flexible armoured cable laid on ceiling/wall clamped with aluminium clamps/ drawn in ERW pipe complete all as specified and directed. Note :- (i) The cables are to be drawn through the false ceilings, laid in floors, fixed to walls as per the site requirements.(ii) The conduits are to be measured and paid seperately under relevent item.Make:- Polycab/ Havells/ KEI. |
| 11 | Supply and laying in repair Mild Steel Stove enameled black conduit alongwith the accessories such as tees, bends, elbows, bell mouth ends and all fixing accessories such as couplers, locknuts, saddles, pipe hook etc. on surface/recess including painting, in case of recessed conduit, cutting the wall and making good the same for of recessed conduit of size 25 mm dia. complete all as specified and directed. Note :- The work is to be carried out in Hospital Bldg at different heights and at different wards/locations.(ii) The quoted rates includes the cost of removing of roof panelling/sheets/False ceilings and fixing it back to the same position.(iii)Any damage done to the govt property will be beared by the contractor at his own cost. (iv)Site inspection is mandotry befour quoting the tender. |
| 12 | Supply & Fix in repair of single type fire hydrant landing valve type A ( Single headed outlet) of 63mm dia size complete all as specified and directed. |
| 13 | Supply & Fix in repair of single type fire hydrant landing valve type A ( Double headed outlet) of 63mm dia size complete all as specified and directed. |
| 14 | Supply and Fixin repair of Hose box made of 18 gauge MS sheet 800mm x 600mm x 250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard complete all as specified and directed. |
| 15 | All as per item No. 14 above, but internal type complete all as specified and directed. |
| 16 | Supply and Fixin repair of hose reel of 15mm/20mm dia and 30 mtrs long confirming to IS 5132 complete all as specified and directed. |
| 17 | Supply and Fixin repair of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short complete all as specified and directed. |
| 18 | Supply and fixin repair of 63mm dia 15 mtr long hose confirming to IS 636 complete with male and female couplingmade of brass confirming to IS 903 complete all as specified and directed. |
| 19 | Supply and FixSluice Valve 200 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed. |
| 20 | Supply and FixSluice Valve 150 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed. |
| 21 | Supply and FixSluice Valve 100 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed. |
