Tender For External Electrification Work From Bo 127 To Bo 210 And From Bo 301 To Bo 426 Of Booking Office Located In Transport Nagar Scheme
Tender Value
29.41 Lakhs
Estimated cost
Bid Submission
28 Feb 2026
0 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For External electrification work from BO 127 to BO 210 and from BO 301 to BO 426 of booking office located in Transport Nagar Scheme
BOQ
| Sl. No. | Item Description |
| 1 | S/E of Double pole stucture ( FOR POLE / PLINTH MOUNTED TRANSFORMER TYPE SUBSTATION )12mt. long 410 SP-62 ST pole (259 Kg) support grouted in 1:3:6 (cement coarse sand 6 graded stone aggregate 40 mm nominal size) including 30 cm high plinthing from ground level with the cost of 3 no 100 x 50 x 6mm 2.24 Mr long Chanel and 3 no. 75 x 40 x 6mm 2.24 Mtr lon Chanel and With D.O. Fuse set , T.P.M.O. switch , anticlimbing device and paintig of pole Complete with all material lab. T&P etc required for proper completion of work or as direction of E/I. (A.R. 2025-26) |
| 2 | Supply, Installation, Testing and commissioning of 11/0.44 kv,100KVA Level 2 rating Aiuminium wound distribution Transformer complete as per UPPCL specification etc all complete .(A.R.2025-26) 100 KVA |
| 3 | Supplying and erection of 11 kV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. DSR 2022 SI NO. 13.10 (312x0.85212=265.86) |
| 4 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects SOR 627/2018 |
| 5 | S/F of stay set atleast 3.5 mtr. Away from the pole complete with Gl 19 mm dia. & 1.80 long stay rod 30 cm. x 63 cm. Anchor plate thimble stay clamp, stay insulator, 19x600 mm. double screw tightner, 7/8SWG GI stay wire etc in 1:3:6 cement concrete & grauting as per direction of E/I. SOR NO.-631/18 |
| 6 | Supply and burying earth electrode for lightning conductor of 600mm x 600mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia. G. I. pipe for watering funnel, 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of E./Ic. complete in all respect. SOR NO.-703/18 |
| 7 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.SOR NO.-717/18 |
| 8 | S/F of danger board with clamp nut & bolt etc all complete. SOR. NO. 1109/18 |
| 9 | Supply & Erection of 8.5 mtr long RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. (A.R. 2023) |
| 10 | S/E of strud stay with 8.5 mtr. Long PCC pole grouted in 1:4:8 cement fine sand & OBB mixture etc all complete. (A.R. 2023) |
| 11 | S/E of 120 sqmm X 3 C + 1 x 95 sqmm + 1 x 16sqmm XLPE insulated ABC bare messenger wire etc complete as per direction and approved by E/I. (A.R. 2025-26) |
| 12 | S/F of suspension clamp suitable for hanging of various size ABC conductor on pole etc all complete as required. (P.S.R) |
| 13 | S/F of PG clamp/connector suitable for connecting of various sizes ABC cable including insulating cap etc complete as per direction of E/I.. (P.S.R) |
| 14 | S/Fof pole mounted type CMS TPN distribution box Sintex size 400 X 300 X 190 MM & 4 Nos. 40 X 50 mm aluminium bus bar with ingress protection to IS 8623 cable entry from bottom & /or sides shockproof & rustproof, suitable for polluted atmostpheres were high working tempreture & higher arc resisteance witherproof & maintenance free complete with supporting clamp i/c locking arrangement & painting etc complete as per direction of E/I. (P.S.R) |
| 15 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 65 and above protection complete in all respect.SOR No. 1421 CAT - AAA /2018 ( make - philips / crompton/ bajaj / havells) |
| 16 | Supply and fixing of 63 Amp. 415 V metal clad T.P. rewireable type switch fuse unit on angel iron bracket complete in all respect. SOR SI NO 313/18 Cat.B ( make - L&T / siemens / havells ) |
| 17 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sq. mm 4 core SOR NO. 501/18 |
| 18 | Painting of electric pole with two coat of aluminum paint over red oxide primer etc all complete SOR No.-634/18 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Feb 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender