|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Dismantling oftiles/stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | M&L machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006of 80 mm thickness M-40 grade with grey cement andpigment complete all as specified and directed. |
| 4 | M&L sand filling in floors or pavings, laid in layers n. exc 15 cm thick, spread, levelled and binded with earth and rammed including watering complete all as specified and directed. |
| 5 | M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, sub base etc complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-1 (20 mm graded aggregate) as in coping, benching and simillar works complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM 1:6 complete all as specified and directed. |
| 9 | M&L for non skid ceramic coloured tiles 7-8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floor etc set andjointed in white or colour cement to match the surface of the tile complete all as specified and directed. |
| 10 | S&F for galvanised cold rolled steel section framed work size 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling including dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and direcetd. |
| 11 | S&F 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets,all as specified and direcetd. |
| 12 | S&F tubes 15mm dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down all as specified and directed. |
| 13 | S&F tubes 20 mm dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorsincluding taking down all as specified and directed. |
| 14 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and directed. |
| 15 | M&L for excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete as directed by Engr in charge. |
| 16 | Returning, filing in, excavated soil including excavated in loose soil but returning filling is of hard soil, spreading, levelling, watering and well rammingin layers not exceeding 25cm etc complete all as specified and directed |
| 17 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed |
| 18 | M&L for reinforced concrete pipes, class NP-3,laid and jointed with collars of 200 mm bore of pipe including demolition complete all as specified and directed. |
| 19 | M&L for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid and tested for 200 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregatecomplete all as specified and directed. |
| 20 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed. |
| 21 | M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 22 | M&L 15mm thick rendering in two (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement including taking down cement plaster on brick or stone walls/ceiling etc all as specified and directed. |
| 23 | M&L preparation of new plastered surface of wall and applying two coat ofexterior weather proof water base emulsionpaintwhite/coloured over one coat of white cement based putty (where it is required) all as specified and directed .Note :-Exterior Acrylic Emulsion Paint only, Should be carried out by any of approved Company /firm and authorized applicator The work under this item shall be carried out by the authorized applicator of manufacturer by using modern techniques.The contractor shall also furnish warranty of quality, finish work and effectiveness of painting under this item for a period of 05 years from the date of completion alongwith manufacturerwarranty of material for the same period complete all as specified and directed. |
| 24 | M&L for complete removal existing treatmentand applying one coats of oil emulsion distemper including one coat of white cement based putty (where it is required) all as specified and directed. |
| 25 | M&L complete removalof old decorated surface of wall and applying two coat ofexterior weather proof water base emulsion paintwhite/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed. |
| 26 | S&F framed work such as grills, gratings,steel gate , purlin etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290 gde E-165 all as specified and directed. |
| 27 | M&L for preparation new steel surface of any description and applyingtwo coats of synthetic enamel painting overone coat of red oxide, zinc chrome primer all as specified and directed. |
| 28 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 29 | S&F in repair5mm thick, looking mirror approved quality with wooden back and edge, complete polishing , fixingin repairs complete all as specified and directed. |
| 30 | S&F in repair of 15 mm in dia, angle cock, fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 31 | S&F in repair to 15 mm bib, cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 32 | S&F in repair to CP Health faucet (ABS body) mild steel chromium platedsuitable for 15mm bore with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all necessary fittings and accessories as directed. |
| 33 | S&FPVC low level flushing cisternof 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed. |
| 34 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 35 | S&F 15 mm angle valvestop cockcast copper alloy, screwed down high pressurechromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 36 | S&F in repair 50 mm PVC (SWR) pipes singlesocketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed. |
| 37 | S&F in repairs vitreous china urinal half stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed |
| 38 | S&F vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 39 | S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed. |
| 40 | S&F in repairs 15 mm bib taps, cast copper alloy, screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified and directed. |
| 41 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mmcomplete all as specified and directed. |
| 42 | M&L in repair PVC (SWR) floor trap,75mm bore, plain with grating including jointing with solvent cement complete all as specified and direcetd. |
| 43 | S&F PVC(SWR) 110mm pipes Singlesocketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and direcetd. |
| 44 | S&F 75mmPVC(SWR) bend with solvent complete all as specified and direcetd. |
| 45 | S&F 75mmPVC(SWR) junction single (single \"T\") equal or unequal with solvent complete all as specified and direcetd. |
| 46 | S&F PVC(SWR) 110 mm bend with solvent complete all as specified and direcetd. |
| 47 | Deduct Schedule of credit (calculation will be done off line) Rs. 7320.00 |
