|
| 1 | S&F 8 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 , complete all as specified and as directed by Engr-in-Charge |
| 2 | M&L for framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work conforming to Fe-290 Gde E-165 , complete all as specified and as directed by Engr-in-Charge |
| 3 | Material and labour for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces n.exc. 10 cm width or girth including preparation of new surfaces, complete all as specified and as directed by Engr-in-Charge |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft /loose soil |
| 5 | M&L for providing cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting, complete all as specified and as directed by Engr-in-Charge |
| 6 | Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength ofbrick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge |
| 7 | M&L for PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in foundation , filling & mass conc , complete all as specified and as directed by Engr-in-Charge |
| 8 | Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over concrete surfaces, complete all as specified and as directed by Engr-in-Charge |
| 9 | M&L for prepration of newly plastered surface andappplying two coatsofcement base paintover priming plastered and other surfaces with alkali resistant priming paint , complete all as specified and as directed by Engr-in-Charge |
| 10 | S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe.410.Gde-E-250quality A, complete all as specified and as directed by Engr-in-Charge |
| 11 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe.410.Gde-E-250quality A , complete all as specified and as directed by Engr-in-Charge |
| 12 | S&F mild steel screw bolts (machine made) or square heads at one end and screwed the other with length of bolt 50mm and diameter of shank 11 to 15 mm, complete all as specified and as directed by Engr-in-Charge |
| 13 | S&F MS round bar 10mm dia for straining, cut to length, bent to shape Fe-410 W Gde E-250 quality A or FE-290 Gde E-165, complete all as specified and as directed by Engr-in-Charge |
| 14 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed by Engr-in-Charge |
| 15 | S&F of Pre-painted galvalume aluminum zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge |
| 16 | M&L preparation of new steel surfaces of Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of primer, complete all as specified and as directed by Engr-in-Charge |
| 17 | M&L for75 mm thickPCC 1:4:8 type D-2 (40 mm graded crushed stone aggs) as in in sub base finish even and rough to receive to top layer, complete all as specified and as directed by Engr-in-Charge |
