|
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 2 | Demolition of Concrete of any description and in any position not otherwise specifically provided for ground level) complete all as specified and directed. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in CMincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | M&L for Pre-cast cement concrete block masonry type C1 1:3: 6 (20mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed. |
| 5 | ditto as per itme no but expect Block and settig in cement mortar 1:4 complete all as specified and directed. |
| 6 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4complete all as specified and directed. |
| 7 | M&L for preparationof new plastered surfaces of wall and applyingtwo coats of cement base paint complete all as specified and directed. |
| 8 | S&F MS Posts and struts in fencing including cutting topsto shape as directed, drilling holes, notching for wire etc : flat Iron fillets (for securing wite mesh etc)including all necessary drilling,bolting and riveting etc and similar work confirming to Fe 290 Grade E-165complete all as specified and directed. |
| 9 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed. |
| 10 | M&L for Cement concrete type C2 1:3: 6 (40mm graded aggregate ) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)complete all as specified and directed. |
| 11 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 12 | M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paintcomplete all as specified and directed. |
| 13 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 14 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement workcomplete all as specified and as directed. |
| 15 | Excavating in trenches n.exc. 1.50m wide and n.exc. 1.5m in depth for foundation etc or for shafts, wells, cess pits, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/disintegrated rock all as specified and as directed. |
| 16 | Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25 cm.in soft/disintegrated rockcomplete all as specified and directed. |
| 17 | Removing excavated material (soil) exc. 250m but n.exc. 500m and depositing where directed. |
| 18 | M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc. complete all as specified and directed. |
| 19 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specifiedcomplete all as specified and directed. |
| 20 | M&L mild steel TMT bars 06 TO 08 mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified complete all as specified and directed. |
| 21 | M&L RCC (Noninal Mix) Type B0 1:2:4 (20 mm graded aggregate ) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 22 | M&L RCC (Noninal Mix) Type B0 1:2:4 (20 mm graded aggregate ) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 23 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to battercomplete all as specified and directed. |
| 24 | Use & Waste Formwork to sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified and directed. |
| 25 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia steel barbed wire with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standard rails,straining bolt etc as directed (each line of wire is to be measured) complete all as specified and directed. |
