|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 4 sq. Mm |
| 3 | 3x6 sq. Mm |
| 4 | Supplying and fixing of following sizes ofPVC conduit /casing caping/flexible pipe along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20/25/32 mm dia Make/AKG/POLYCAB/FINOLEX/Shrinath Make |
| 5 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 6 | 8 way Double door |
| 7 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 8 | Single pole -6 amp-32 amp |
| 9 | Double pole-32 amp |
| 10 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 11 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 13 | 3.5 x 240 sqmm (70 mm) |
| 14 | Providing & fixing ofsingle phase two module digital type energy meter fitted in the existing MCB DB box.cat ref. WD401010OOOO Make L&T and its equivalent. |
| 15 | Providing & fixing of400 amp, 415 volt 4 polechangeover switch cat ref. CO440000OSOO Make L&T on existing defective panels including dismantling of defective changeover etc as required by engineer in charge. Make L&T/ Havells / schenider etc. |
| 16 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty) armoured UG electric cable with aluminium conductor of size 3.5 x 240 sq.mm. direct in ground including excavation,and refilling the trench etc as required but excluding sand cushioning, protective covering etc. as required. (Havells/KEI/Polycab) |
| 17 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5X240sq.mm. in the existing masonry/ open duct/ hume pipe/saddling on the wall etc as required. (Havells /KEI/ Polycab) |
| 18 | Making of the hole inside theroad (Bitumin / PCC ) for laying of Under ground cable in Suitable HDPE/GI pipe without damaging of road. |
| 19 | Fabrication, Supplying, installation, testing and commissioning of outdoor hut type compartmantalised, double door feeder pillar made out of 2mm thick ms sheet of size apprx. ( 400 mm Depth )with both side opening totally enclosed weather, damp proof having400A FP aluminum bus bars insulated with PVC color coded heat shrinkable sleeves with MS angle frame made out of 50X50X6 with 1000mm long legs suitable for 415V, 3 phase 50Hz AC supply complete with painting/Powder Coating, connections, interconnections with aluminum conductors complete with cement concrete foundation i/c finishing etc. and having provision for fixingrequired accessoriesas required complete in all respect. Make: RS Controls and Switchgears Private Limited/ Adlec/ Tricolite/Any CPRI APPROVED MAKE as per direction of engineer in charge. |
| 20 | Supply, installation, testing and commissioningof following accessories in existing panel cubical type compartmentalized having necessary cable alleys, including cconnection inter-connection with aluminium busbar etc asper requirement and direction given by the Engineer-in charge |
| 21 | 160- 200 Amps, 4 pole , breaking capacity 36 KA, 415 V, 50 Hz DN2.250D type with thermal release with cat ref. CM98065OONO make L&T. |
| 22 | 320-400 Amps, 4 pole , breaking capacity 50 KA, 415 V, 50 Hz type DU400N with suitable thermal operating mechanism withcat ref- CM98404OORO Make L&T |
| 23 | 63 Amp TP&N MCB |
| 24 | 40/63 Amp SP&N MCB |
| 25 | R,Y,B Phase Indicating LED , |
| 26 | CT 200/5 Make L&T. |
| 27 | Digital VAF Meter L&T make |
