|
| 1 | S/I/T/C of single phase mono block pump set complete with all accessoreies workable on 240/415 volts,50 Hz ac supply (a 1 Hp (0.75 KW single phase pump set, head from 12-30. metre suction and delivery 25x25 mm |
| 2 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 3 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 4 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 5 | Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etcas reqd. a) 25mm(Nominal Bore) |
| 6 | b) 32mm(Nominal Bore) |
| 7 | S & F following size of G.I. Socket. as reqd.a 25mm |
| 8 | b 32mm |
| 9 | S & F following size of G.I. Union. as reqd. a 25mm |
| 10 | b 32mm |
| 11 | S & F following size of G.I. Elbow. as reqd.. a 25mm |
| 12 | b 32mm |
| 13 | Supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd a Single Phase 1.5 HP having discharge of 72 LPM Approx. at 49 M Head. |
| 14 | Providing and laying cement concreat 1:2:4 mix for sanitary sealing of well at top of 450mmX 450mmX 500 mm deep fromtop comp as reqd. |
| 15 | Lifting of existing submersible pump setwith its all accessories from well and lowering the same along with all accessories for the depth upto 50 meter complete as reqd. |
| 16 | Rewinding of single / three phase AC motors of vertical type multi stage submersible pump sets of following ratings :- (a) Single Phase 1/1.5 HP. |
| 17 | Repairing of pumping unit of 1/1.5/3 HP vertical type multi stage submersible pump setby replacement of following accessories / parts etc compelete as reqd. (a) Gun metal bush / bearing. |
| 18 | (b) Pump Shaft. |
| 19 | (c ) Impeller. |
| 20 | Replacement of following items for cubicle panel etc. as required. (a) Capacitor 36 mfd |
| 21 | (c) Contactor & Relay of Single Phase Starter unit. |
| 22 | Supply, Installation, testing and commissioning of cubical type control panel board for single phase & Three Phasesubmersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc includingconnections etc as reqd. 1.5 HP (Single Phase) |
| 23 | P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. a 3x 2.5 sq.mm |
| 24 | Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i/c clips etc complete as reqd. b 10mm |
| 25 | Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or linei/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd. |
| 26 | S & F MS clamp made up of iron flat of size 50X6 mm with 4 nut bolt for holding the GI pipe pipe as reqd.a 32 mm |
| 27 | Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.1200mm, BEE 5 star rating, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 28 | Part -B Comprehensive AMC (Annual Maintenance Contract) for repair and maintenance of Tube Wells installed at various Municipal works for depth of 50 meter to 100 meter forCost for one tube well with submersible pump set etc. of rating up to 1/1.5 HP for one year. |
