|
| 1 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store |
| 2 | 15mm |
| 3 | 20mm |
| 4 | 25mm |
| 5 | S&F medium grade galvanized tube with all fitting all fixed to wall and ceiling or laid in floor |
| 6 | 15mm |
| 7 | 20mm |
| 8 | 25mm |
| 9 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 10 | 15mm |
| 11 | 20mm |
| 12 | 25mm |
| 13 | S&F in repair Low density polythylene (LDPE) pipes of pressure rating 6kgf/sq.cm (15 mm bore) |
| 14 | Cutting chases, pinning in, Brick Walls making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 15 | Demolition of reinforced cement concrete over head tanks complete all as specified and directed. |
| 16 | M&L Cement concrete in foundations, filling and Tank pedastalconcrete C2 1:3:6(40mm graded agg) |
| 17 | Dismantling of water tank and removal to store yard exc 500 and n.exc 1000 lt. |
| 18 | S&F 1000ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 19 | Dismantling of water tanks exc 2000 and n. exc. 5000 ltr and removing to store |
| 20 | S&F 5000ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 21 | Dismantling of water tanks exc 5000 and n. exc. 10000 ltr and removing to store |
| 22 | S&F 10000ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 23 | Dismantling of water tanks exc 250 and n. exc. 500 ltr and removing to store |
| 24 | S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted all as specified. |
| 25 | S&F in repairs stop valve cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe size complete all as specified. |
| 26 | 15mm |
| 27 | 20mm |
| 28 | 25mm |
| 29 | S & F anglevalves, cast copper alloy, Fancyype,Chromium Plated 15 mm dia screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 30 | S&F cromimum plated with long shank(concealed type)stop valves cast copper alloy screwed down high pressureahandle screwed both and for iron pipe 15mm bore, minimum furnished weight not less than 0.575 kg complete all as directed |
| 31 | S&F 15mm bore brass bib cock CP cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule. minimum furnished weight not less than 0.575 kg complete all as directed |
| 32 | ditto as per item above but fancy type |
| 33 | S&F in repairs pillar taps cast copper alloy with capston head CP screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore but minimum finished weight not less than 0.960 kg complete. |
| 34 | ditto as item no 21 but fancy type,but minimum finished weight not less than 0.665 kg complete. |
| 35 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed make Jaguar and equivalent |
| 36 | S&F CP brass hot and cold wall mixer cock 15mm bore withbutter fly handles complete all as directed by Engr-in-Charge. |
| 37 | S&F 15 mm stainless steel telescopic handspray/ shower chromium plated complete all as directed by Engr-in-Charge. |
| 38 | M&L for providing cement concrete (1:5:10) type E2 (using 40mm graded aggregate) as in foundations, filling and mass concretecomplete all as specified and directed. |
| 39 | M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 250ltr and not exc. 500 ltrs omplete all as directed by Engr-in-Charge.Note :- Date of cleaning shall be marked on tank with synthetic enamel paint. |
| 40 | M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 500ltr and not exc. 1000 ltrs omplete all as directed by Engr-in-Charge.Note :- Date of cleaning shall be marked on tank with synthetic enamel paint. |
| 41 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20MM\ |
| 42 | 30. S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25MM |
| 43 | Dismatling floor, hearth or wall tiling including cement mortar bedding backing removing serviceable tiles and rubbish of the premises. |
| 44 | M&L non skid ceramic tile area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm thick in floor etc 15mm thick screed bedding in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified.Make :-Orientbell/Somany/Kajariya/Nitco/Johnson. |
| 45 | M&L non skid ceramic tile area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm thick in floor etc 15mm thick screed bedding in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified.Make :-Orientbell/Somany/Kajariya/Nitco/Johnson. |
| 46 | M&L glazed ceramic coloured tiles 300/200/7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match tile in dado,including 10 mm thick rendering in CM 1:6 even and fair to receive tiles etc complete all as specifie |
| 47 | M&L glazed ceramic coloured tiles 450x300x7/350/250/7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match tile in dado,including 10 mm thick rendering in CM 1:6 even and fair to receive tiles etc complete all as specified. |
| 48 | Taking down cement plaster on brick walls etc including racking out joints, hacking for key, scrubbing down with water etc as directed. |
| 49 | M&L for 10mm thick renderingin CM 1:4 on fair feces of brickwork or concrete surface of walls as backing coat. |
| 50 | M&L for 15mm thick rendering in CM 1:6 on fair feces of brickwork or concrete surface of walls as backing coat complete all as specified and directed. |
| 51 | S&F PVC valve less, syphonic action type flushing cisternlow level, white with inlet, ball valve float and handle incl brackets, 10 ltr capacity, fixed in repair. |
| 52 | S&F 150 x 150mm stainless steel grating fixed on floor /Nahani trap in repair all as specified and directed by Engr-in-Charge. |
| 53 | S&F 150x150mm salt glazed stone ware gully trap ’P’ type grating fixed in repair in PCC 1:2:4 type B1 30x30x30cm with steel grating. |
| 54 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white(european type) (excluding fixing bolt flushing cistern and flush pipe |
| 55 | S&F in repairs water closet vitreous china squatting pan ‘Orissa’ pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) anti symphonize pipe etc and provision of cement concrete bedding in PCC 1:5:10 type B2 and making good the disturbed floor surfaces. |
| 56 | S&F vitreous china semi-pedestal pattern white (anglo-indian type) white (excluding fixing both flushing cistern and flush pipe) complete all as specified and directed. |
| 57 | S&F Plastic Water Closet seat, black,closed pattern with flat bottom and covered and mild steel chromium plated or aluminised hinging device. |
| 58 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type),omplete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing utomaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe) |
| 59 | S&F in repairs wash hand basin vitreous china white flat back size 550x400 mm fixed on existing bracket incl. one No. CP brass fitting &PVC connection 15 mm bore 45 cm long heavy duty and connecting to existing GI pipe or stop valve complete as specified |
| 60 | S&F PVC connection 15mm size with PTMT nuts of length 450mm long. |
| 61 | S&F flush pipe of PVC 32mm dia for low level flushing cistern fixed in repair. |
| 62 | swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40 gms) |
| 63 | M&L for spl treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled inc filling of lean conc 1:5:10 complete all as specifiesand directed. |
| 64 | Waste coupling of PTMT (half or full threaded) (Min wt 45 gms for 32mm) |
| 65 | Waste coupling of PTMT (half or full threaded) (Min wt 60 gms for 40mm) |
| 66 | S&F Ball valves in repair high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 142 gms) (bore dia 15mm) |
| 67 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 210 gms) (bore dia 20mm) |
| 68 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 69 | S&F 8mm thick glass shelf size 450mmx100mm with SS brackets/ rail as approved and directed by Engineer-in-Charge. |
| 70 | S&F 8mm thick glass corner, radius not exceeding 300mm dia with SS brackets/ rail as approved directed by Engineer-in-Charge. |
| 71 | S&F stainless steel peg set of five hooks as approved directed by Engineer-in-Charge. |
| 72 | S&F stainless steel towel rail, 20mm dia, 600mm long complete all as specified and directed. |
| 73 | S&F tubular towel rail,aluminium anodised, 20mm dia, D type, 60 cm lng between flanges complete all as specified and directed. |
| 74 | S&F in Repair Soap dish, any type, fixed to plugs with chromium plated brass screws |
| 75 | Dismantling of CI/PVC or reinforced concrete drain pipes 75/100mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 76 | S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. Make:- Nico or equivalent make approved by GE. |
| 77 | S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. Make:- Nico or equivalent make approved by GE. |
| 78 | S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed. |
| 79 | S&F bends any radius diminishing piece or tapers of CI 100 mm dia complete all as specified and directed. |
| 80 | S&F CI P or S trap 100 mm bore complete all as specified and directed. |
| 81 | S&F 75mm bore CI branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branchescomplete all as specified and directed. |
| 82 | S&F 100mm bore CI branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branchescomplete all as specified and directed. |
| 83 | S&F 75mm bore CI bend (any radius) with duck foot or heel restcomplete all as specified and directed. |
| 84 | S&F 100mm bore CI bend (any radius) with duck foot or heel restcomplete all as specified and directed. |
| 85 | S&F CI cowl for 100mm bore pipescomplete all as specified and directed. |
| 86 | Cutting around pipe 100mm bore and open the lekage joint and repair with cement morter 1:1with water proofing compound and making good the surface with CM 1:3 and touch with cement base paint(externally from first floor to third floor complete all as specified and directed. |
| 87 | S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor allas complete. |
| 88 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor all as complete. |
| 89 | S&F 110 mm dia PVC (SWR) bends any length any type. |
| 90 | S&F 75 mm dia PVC (SWR) bends any length any type |
| 91 | S&F 110mm PVC (SWR) branch piece double (double Y) equal or unequl. |
| 92 | S&F 110mm PVC (SWR) branch piece double (Single Y) equal or unequl. |
| 93 | S&F 75mm PVC (SWR) branch piece double (Single Y) equal or unequl. |
| 94 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 95 | S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 100 mm bore pipe complete all as specified and directed. |
| 96 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. |
