E/w in excavation in foundation in ordinary soil including lead up to 30.00 m and lift 1.50m and all labour material and T&P etc. as per SI. No. 251
2
Cement concrete with 1:6:12 in 40 mm guage brick ballast, fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under C.C. including supply of all material , labour and T&P etc required for proper completion of word as per SI. No. 273.
3
M-150 class brick work in 1:6 cement & coarse sand mortar in foundation up to plinth as per SI.305 No.
4
Eathwork in embenkment mechanically compactod to 85% soil excavation to be in the from of regular pits not exceeding. Cartage of earth up to 8.0km. {D.S.R chapter 1 (1.1.2)
5
12 mm thick plaster in 1:4 cement and coarse sand i/c all alabour and material T&P etc complete.
6
C C with 2.0cm gauge approved stone ballst approved coarse sand and cenent to the proprotion of 1:2:4 including all labour material and T&P complete etc.as per S.I No 279 a
7
Kota stone slab flooring over 20mm (average) thck base laid over and jointed with grey thick base laid over and jointed grey cement wslurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar S.I No11.26
8
Providing and fixing angle inron frames for doors, windows and ventilators of mikd steel andle sections of size 35x35x5mm joints mitred and welded bu angle iron 35x35x5mm or 35x5mm flat pleces to the existion T-iron frame or to the wall with dash fastener, including dixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complert as per the direction of Engineering -in charge.S.I No 10.31
9
Supply and fixing of anodized aluminium door having 2 mm thick aluminium section excluding coation and avervge coation of 20 mm microns fulty glaxed made of aluminum door tube sixe 83.5x44.65m sa vertical member and 1140x44.45 mm size tube in bottom and horizontal member door chukhat should be of aluminum tublar vertical with two openable shutter, the rate will includin cost of material flxtures 4mm glass handles locks screw neceessary bending adn excluding cost kthe work as per direction of Engineer -In -charge. chap 9 (s.i no 38
10
S/F of Power plug 15/240 Volt flush switch and 5pin 15A/240v type universal socket in suitable M.S Box of 175mm x 100mmx50mm size with ohenolic laminate sheet cover 3mm thick flxed with brass machine acrew anf cup washer S.I No 1139
11
Supply and fixning of 40AMP TP MCB (10KA ) C curve S.I No 1016CA B
12
Provinding and placing on terrace (at all floor levels) polyethylene water storage tank IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but with out fittings and the base support for tank chap 20(s.i no 18.48
13
chlorinated polyvinl chlorid (CPVC) pipe 20mm momial dia S.I No 18.9.2
14
As per Bill of quantity Material Cost Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
