|
| 1 | \"Notes: (i) Please refer Schedule \"A\" Notes of tender documents. |
| 2 | Taking down carefully existing unserviceable aluminium/ copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 3 | M&L point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 ,including existing PVC conduitetc, modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 1 to 18 modules with inner and outer modular cover plates, including FRLSH, rigid PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed, for the following: - Note:- (i) Modular GI metal flush/sunken Box along with modular base/front cover plate are incl in the item rate quoted (ii) Only switches, sockets and fan regulators shall be measured and paid separately. |
| 4 | One light/buzzer point controlled by one, one way switch complete all as specified and directed. |
| 5 | One fan/exhaust fan point controlled by one, one way switch complete all as specified and directed. |
| 6 | One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch complete all as specified and directed. |
| 7 | One 3 pin socket out let 5 amp point on the (same board) with other switches complete all as specified and directed. |
| 8 | All as per item No. 3 here-in-before butwith 2.5sq mm size FRLS single core PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor and 2.5sqmm PVC insulated and unsheathed cable 1100 volts grade with multistrand copper conductor as earth wire for3 pin socket outlet 15 amp on independent board complete all as specified and directed. |
| 9 | M&L point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 ,marked in and including heavy duty PVC concealed conduit medium grade ISI marked 20 mm dia with all its fittings, PVC junction boxes etc, modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 1 to 18 modules with inner and outer modular cover plates, including FRLSH, rigid PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to commonearth and connected to earth dolly complete all as specified and directed, for the following: - Note:- (i) Cutting/chasing of wall etc. deemed to be included in quoted rate of this item. (ii) Modular GI metal flush/sunken Box along with modular base/front cover plate are inclusive in the item rate quoted(iii) Only switches, sockets and fan regulators shall be measured and paid separately |
| 10 | One light/buzzer point controlled by one ,one way switch complete all as specified and directed. |
| 11 | One fan/exhaust fan point controlled by one, one way switch complete all as specified and directed. |
| 12 | One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch complete all as specified and directed. |
| 13 | One 3 pin socket out let 5 amp point on the (same board) with other switches complete all as specified and directed. |
| 14 | All as per item No. 5 here-in-before butwith 2.5sq mm size FRLS single core PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor and 2.5sqmm PVC insulated and unsheathed cable 1100 volts grade with multistrand copper conductor as earth wire for3 pin socket outlet 15 amp on independent board complete all as specified and directed. |
| 15 | M&L point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 ,marked in and including PVC casing caping with all its fittings, PVC junction boxes etc, modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 1 to 18 modules with inner and outer modular cover plates, including FRLSH, rigid PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed, for the following: - Note:- (i) Cutting/chasing of wall etc. deemed to be included in quoted rate of this item. (ii) Modular GI metal flush/sunken Box along with modular base/front cover plate are inclusive in the item rate quoted (iii) Only switches, sockets and fan regulators shall be measured and paid separately |
| 16 | One light/buzzer point controlled by one; one way switch complete all as specified and directed. |
| 17 | One fan/exhaust fan point controlled by one, one way switch complete all as specified and directed. |
| 18 | One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch complete all as specified and directed. |
| 19 | One 3 pin socket out let 5 amp point on the (same board) with other switches complete all as specified and directed. |
| 20 | All as per item No. 7 here-in-before butwith 2.5sq mm size FRLS single core PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor and 2.5sqmm PVC insulated and unsheathed cable 1100 volts grade with multistrand copper conductor as earth wire for3 pin socket outlet 15 amp on independent board complete all as specified and directed. |
| 21 | M&L in replacement Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conductor 6 Sqmm in existing conduit with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up, complete all as specified and directed. Note: 2 runs of cable will be measured as one length complete all as specified and directed. |
| 22 | M&L in repair mild steel/ pressed steel anodised sunken box 6/8 module concealed in wall of 1.6 mm thick of externally covered with modular cover and plate for fixing of modular switch, socket etc including all electrical connection and cement motor and finishing the surface to match with the existing surface complete all as specified and directed. |
| 23 | M&L in repair mild steel/ pressed steel anodised sunken box 3 module concealed in wall of 1.6 mm thick of externally covered with modular cover and plate for fixing of modular switch, socket etc including all electrical connection and cement motor and finishing the surface to match with the existing surface complete all as specified and directed. |
| 24 | M&L in repair mild steel/ pressed steel anodised sunken box 2 module concealed in wall of 1.6 mm thick of externally covered with modular cover and plate for fixing of modular switch, socket etc including all electrical connection and cement motor and finishing the surface to match with the existing surface complete all as specified and directed |
| 25 | Supply and fix in repair ceiling rose surface bakelite, three terminals, 230V AC with polycarbonate body complete all as specified and directed |
| 26 | Supply and fix in repair modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 27 | Supply and fix in repairmodular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 28 | Supply and fixin repair modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 29 | Supply and fix in repair modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed. |
| 30 | Supplyand fixin repair switchsocket modular , 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed. |
| 31 | Supply and fix in repair modular fan regulator 120 W 2 module complete all as specified and directed. |
| 32 | Supply and fix in multi musicding dong AC 230 Volt single pole complete all as specified and directed. |
| 33 | Supply and fixin repair lamp holder PVC / Polycarbonate typecomplete all as specified and directed. |
| 34 | Supplyand fix in repair inverter type LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed. |
| 35 | Supplyand fix in repair inverter type LED 10 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed. |
| 36 | S&F of LED recessed mounting square slimLED down lighter 36 Watt for AS/GB/POP ceiling2\"x2\" size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 37 | M&L of PVC insulated service cable flat or roundsheathed, aluminium, multistranded conductor 1100V grade size16 Sq mm 2 core complete all as specified and directed. |
| 38 | Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & Fsheet metal enclosure powder painted forMCB DB SPN08 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed. |
| 39 | Taking down carefully MCBs, metal clad plug, distribution boards/main switches of any type and size and Supplying and fixing sheet metal enclosure powder painted for MCB DB vertical type TPN 4 way double door with din rail and busbar with IP-43 protection with door earthing and isolated neutral bar and insulated busbar assembly includingMCCB of 100 Amps complete all as specified and directed. |
| 40 | Supply & Fix in repair MCB TPN, 63 Amps series having current rating 10 KA complete all as specified and directed. |
| 41 | Supply & Fix in repair MCB SPN, 6 to 63 Amps having current rating 10 KA complete all as specified and directed. |
| 42 | S&Fin repair MCB single pole, 6 to 32 Ampshaving current rating 10 KA complete all as specified and directed |
| 43 | Labour only for repair/replacementto internalwiring fittings and fixtures such as lightfittings, sockets, switches, fan regulators, MCB, bell push and bell buzzer etc in any typeand capacity &in any position including replacing unserviceable item or replacing whole fixture, fittings in internal electrification , fault finding in wiring complete all as specified and directed Note 1 :Theitems should be paid separately under itemNo. 31 to 50Note 2: Labour charges for replacing items No. 31 to 50 shall be deemed to be included in this item. |
| 44 | Supply only LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed. |
| 45 | Supply onlyLED 10 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed. |
| 46 | Supply only fanregulator electronic, step type, socketnon modular suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified anddirected. |
| 47 | Supply only lamp holder PVC / Polycarbonate type suitable for LED lamp fitting complete all as specified and directed. |
| 48 | Supply onlyBell push, flush type 5 AMPAC 230 Volt single pole complete as specified and directed. |
| 49 | Supply only socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit, as per model at sitecomplete all as specified anddirected. |
| 50 | Supply only switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit as per model at site complete and 4 holes on corner all as specifiedanddirected. |
| 51 | Supply onlyswitch flush type,6 Amps, single pole, one way, 230 volts AC circuit complete all as specified anddirected. |
| 52 | Supply onlyswitch flush type, 15 Amps, single pole, one way, 230 volts AC circuit complete all as specified anddirected. |
| 53 | Supply only multi music buzzer , ding dong AC 230 Volt single pole complete as specified and directed. |
| 54 | Supply only modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 55 | Supply onlymodular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 56 | Supply only modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed. |
| 57 | Supply only modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed. |
| 58 | Supply only switchsocket modular , 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed. |
| 59 | Supply only modular fan regulator 120 W 2 module complete all as specified and directed. |
| 60 | Supply only MCB TPN, 63 Amps series having current rating 10 KA complete all as specified and directed. |
| 61 | Supply only MCB SPN, 6 to 63 Amps having current rating 10 KA complete all as specified and directed. |
| 62 | Supply only MCB single pole, 6 to 32 Ampshaving current rating 10 KA complete all as specified and directed |
| 63 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt around earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1:3:6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1:2:4+E79 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle completeall as specified & directed. Note: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. |
| 64 | S&F in repair9W LED Inverter bulb complete all as specified and directed. |
| 65 | Supply and fixelectronic meters temper proof LCD display with polycarbonate cover 230 Volt , 10-60 Amps , accuracy class - I , 50 Hz, conforming to IS 13779,IP - 54 with parameters to show data , time, current reading , load , PF, voltage and KWH complete all specified and directed. |
| 66 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, Double bearing, heavy duty motor, protective steel bird guard including making holes in any type ofwall of any thickness and making holes in any type of wall, good finishing with PCC complete all as specified and directed. |
| 67 | Supply and fix exhaust fan, Plastic body AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 68 | Supply and fix of LED bldg light 45 watt IP66 with internally prewired incl electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete all as specified and directed. |
| 69 | Supply and fixing ofsheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed. |
| 70 | M&L for disconnecting, taking down and removing of ceiling fan of any description, any sweep and from any position / locations and connecting upfrom ceiling rose or connector to ceiling fan, necessary oiling and greasing including supplying nuts, bolts, canopy, down rod, clamps, capacitor, rubber bush and replacement of unserviceable parts if any, making necessary adjustment and proper alignment of blades, connecting to existing electric sources with using new 1.5 sqmm 3 core multistranded PVC insulated copper wire FRLS to required length and testing at site complete all as specified and directed. Note : (i) The unserviceable winding / bearing or any parts shall be paid measured and paid for separately as \"supply only\" under appropriate item of sch \"A\" . (ii) Burnt out windings replaced and paid for separately under appropriate item of Sch \"A\" . (iii) Labour charges for fixing of items which is mentioned here - in - after as supply only is deemed to be included quoted rate.(iv) The unit quoted rate including the replacement of nut bolt, canopy, down rod, clamps, capacitor, rubber bush, oiling and greasing. |
| 71 | Description all as per serial item No 53 here in before but for exhaust/cabin fans of any size/makeNote : (i) The unserviceable winding / bearing or any parts shall be paid measured and paid for separately as \"supply only\" under appropriate item of Sch \"A\" . (ii) Burnt out windings replaced and paid for separately under appropriate item of Sch \"A\" . (iii)Labour charges for fixing of items which is mentioned here - in - after as supply only is deemed to be included quoted rate.(iv) The unit quoted rate including the replacement of nut bolt, capacitor, oiling and greasing. |
| 72 | Taking out & removing old burnt-out windings of electric ceiling and exhaust/cabin fans of any type and rewinding of motor of size upto 450 mm sweep for exhaust/ cabin fan and 1400mm sweep for ceiling fan with appropriate size super enamelled copper wire as approved by the Engineer-in-charge including insulating material such as illuminous paper, Etherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engr-in-charge of exhaust fan complete all as specified and directed. |
| 73 | Supply only bush suitable for exhaust fan complete all as specified and directed. |
| 74 | Supply only condenser/capacitor suitable for 230 volts singles phase of capacity 2.5 MFD for exhaust fan complete all as specified and directed. |
| 75 | Supply only fan blade (set of three), complete with tightening bolts/screws, made of suitable for any make and colour of exhaust fan as directed at site by Engr- in -Charge or complete all as specified and directed. |
| 76 | Supply only exhaust fan frame made out of MS sheet for any make and size of exhaust fan with suitable size of nuts, bolts lugs and washers complete all as specified and directed. |
| 77 | Taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enamelled copper wire as approved by the Engineer-in-charge including insulating material such as illuminous paper, etherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engr-in-charge of ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan complete as directed for the following Fans:-(a) Rewinding of motor of ceiling fans 1200/1400 mm sweep |
| 78 | Supply only bearing of celling fans for celling fans of 1200/1400mm sweep suitable for different makes /type of fans complete all as specified and directed. |
| 79 | Supply only condenser/capacitor suitable for 230 volts singles phase celling fan 1200mm/1400 sweep of approvedmake and quality of capacity 2.5 MFD complete all as specified and directed |
| 80 | Supply only PCBfor BLDC fan 1200mm/1400 sweep ofas per existing size complete all as specified and directed. |
