|
| 1 | M& L for site clearance from shurbs and small vegitation height not exc 1 mincluding surface levelling upto avg ht 15 cm of soil including removing from site upto a distnce not exc 100m complete all as specified and directed. |
| 2 | M&L for Surface excavation in hard/ dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 3 | Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to the stores and rubbish off the premises complete all as specified and directed. |
| 4 | M&L Machine pressed precast concrete inter locking paver block any shape and size with Grey cement andpigment conforming to IS 15658-2006 of 80mm thickness , M-35 Grade complete all as specified and directed. |
| 5 | M&L for refixing old interlocking paver block over 25mm thick Sand Cushioning complete all as specified and directed. |
| 6 | M & L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. |
| 7 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed. |
| 8 | M&L for Cement concrete 1:4:8type D- 2 (40mm graded stone aggregate) and 75 mm thick complete all as specified and directed. |
| 9 | Cutting holes into or through brick walls having superficial area not exc. 150 sq cm built in Cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. |
| 10 | M&L for 15 mm thick renderingin CM 1:4 on brick/concrete surfaces of beam and column, with fiber glass plaster mesh mesh size 5 × 5mm and mesh density 165g/sq.m,mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building), complete all as specified and directed.Note :- Water proofing compound shall be measured & paid separately. |
| 11 | Supply only liquidwater proofing compound complete all as specified and directed. |
| 12 | Demolition of brick work or stone/concretre block/boulders masonry, built in cementmortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 13 | M & L for for brick masonry using sub class \"B\" bricks, straight or curved on plan exc 6m mean redius bult in CM 1:4, complete all as specified and directed. |
| 14 | M & L for brick masonry using old brick (reused brick) sub class \"B\", straight or curved on plan etc 6m mean redius built in CM 1:4 complete all as specified and directed. |
| 15 | Dismantling posts & struts (Wood, steel or RCC) any section, including taking out olf barberd wire/coil & embedded portion & making good distributed ground, complete all as specified and directed. |
| 16 | M&L for RCC design mix M-25 grade inbeams , and the like complete all as specified and directed. |
| 17 | M&L for RCC design mix M-25 grade incolumns and the like above tap of footing complete all as specified and directed. |
| 18 | M&L for form work in columns, pillars, piers, posts and struts etc. in vertical or to batter for rough finshed flat surfaces complete all as specified and directed. |
| 19 | M&L for form work in beams etc. in vertical for rough finish flat surfacescomplete all as specified and directed. |
| 20 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 21 | M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete as in stirrups complete all as specified and directed. |
| 22 | M&L for guniting RCC works in coloum, beams, slabs, ceiling, Chajjas, Facia, landing, balconies etc by removing loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 50 mm x 25 mm with 3 mm dia steel wire as facias/drops and similar works etc and applying one coat epoxy resin concrete bonding agent over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacurers instruction) to bond old and new concrete, gunniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total avg thickness shall be40 mm thick with cement mortor (1:2) using PPC cement of 43 grade mixing with water proofing admixture polycrete @ 2% by weight of cement complete all as specified and directed by Engr-in-Charge.Note :The following items shall be deemed to be included in quoted rate(i) Reinforcement bars and plastering to guniting surface (ii)After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for plastering(iii) Work is to carried out in patches(v) Rate for scaffolding etc shall be deemed to be included in quoted rate for up to four Storey.(iv) Guniting at Ground floor to 4 th story(v) Anti-corrosive protective coating for reinforced bars (vi) Two coat oil bound/Apex over a coat of primer over guniting including putty(vii)15 mm plaster in CM 1:4shall be done on Guniting area |
| 23 | M & L for preparation of old wall surfaces by removal of existing treatmentand apply two coats of cement based paint over a coat alkali primer resistanceincl one layer of 2 mm thick birla white wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 24 | M&L for preparation of old/new treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt andallloose scales of existing treatment using sand paper andapplying two coats of weather proof exterior emulsion (water based)paint (in camouflage pattern) of dark colours/shade on walls (shade as approved by GE) over 1 coat of water based exterior primer incl one layer of 1mm thick plaster of paris putty to prepare the surface even and smooth for exterior/interior on wall/ceiling surfaces complete all as specified and directed.Note : Pattern of camouflage shall be decided by user. |
| 25 | M&L for PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate lintel, coping, benching, roof padding as levelling course complete all as specified and directed. |
| 26 | M&L for Damp proof course in cement concrete 1:2:4, type B-0 40 mm thick to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 27 | Removal of excavated soil to a distance exceeding 1.5 km but n exc 5km and depositing where direcdted at a level not exceeding 1.5m above starting point complete all as specified and directed. |
| 28 | M & L for broken stone or boulders hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 29 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 30 | Returning filling with excavated soil obtained from excavation in layers n exc 25cm including spreading levelling watering and well ramming complete all as specified and directed. |
| 31 | S & F mild steel TMT bars 10mm dia and over cut to length bent to shape required including crankingbending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 32 | All as per item No 31 above but 6 to 8mm dia. |
| 33 | M&L for 15 mm thick cement plasteringin CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and directed.Note :- Water proofing compound shall be measured & paid separately. |
| 34 | M&L for M-25 Reinforced cement concrete (design mix) Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 35 | M&L for one brick thick brick work with sub class \"B\" old size bricks straight or curved on plan any radius built in cement mortar 1:6, complete all as specified and directed. |
| 36 | M&L for Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and directed. |
| 37 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and directed. |
| 38 | S&F 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position complete all as specified and directed. |
| 39 | S&F Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms complete all as specified and directed. |
| 40 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high densityplastec ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 41 | Supply & fixing, jointing and testing galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors for the following sizes:- (a) 15mm dia bore |
| 42 | All as per item No 41 above but 20mm dia bore |
| 43 | M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) P & S type including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and directed. |
| 44 | S&F PVC Flushing Cistern 10 Ltr capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and directed. |
| 45 | S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. |
| 46 | S&F in repair looking mirror 750x600x6mm thick selected quality glass mounted on 25mm size SS Stud fixed with CP brass screws complete all as specified and directed. |
| 47 | S&F High pressure PVC connections pipe 600mm long suitable for 15mm size with Brass CP Check nut complete all as specified and directed. |
| 48 | S&F SS Chromium Plated Towel Rail 600mm Long, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete all as specified and directed. |
| 49 | S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and directed. |
| 50 | S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed. |
| 51 | S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and directed. |
| 52 | S&F in repair100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed. |
| 53 | M&L for replacement of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed. |
| 54 | S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls and floor complete all as specified and directed. |
| 55 | S&F in repair 75mm dia CI Vent Cowl and fixed with cement morter complete all as specified and as directed. |
| 56 | S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and directed. |
| 57 | S&F brass CP fency Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. |
| 58 | S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed. |
| 59 | S&F Liquid Soap Dispensor with holder,fix in wall with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish/Dispensor of any description, complete as all specified and directed. |
| 60 | S&F 150mm long Aluminium anodised handles, cast type complete all as specified and directed. |
| 61 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 62 | S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed. |
| 63 | S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 64 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 65 | S&F in repair for factory made 30mm Thickmoulded WPC with decorative surface 2m thk Moulded wood grain printed Prelam PVC sheet on front face and 2mm thk PVC sheet on back side, 100 % Solid door ( Conforming As Per IS : 4020 ) made from 100% LEAD FREEsingle extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capasity.Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screwsi ncl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as sprceified and directed by Engr-in-Charge. |
| 66 | M&L for anodised aluminium framed workfor door, window / vent (powder coated)aluminiumwith one or more rebated incl jointed cleat for fixing etc complete all as specified and directed. |
| 67 | M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed. |
| 68 | M&L for 4.8 mm thick float glass ordinary quality\" frosted glass and glazing with aluminum beeding and gasket to aluminum frameworkin squareexc 0.50 sqm ineach pane in repair complete all as specified and directed. |
| 69 | S&F 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed. |
| 70 | M&L for Cement concrete type D- 2,1:4:8 (40mm graded stone aggregate) and 100mm thick complete all as specified and directed. |
| 71 | S & F in repair vitrous china Half Stall Urinal with Sensor Operated valve, white or colour with Sensor suitable for urinal brand as directedcomplete including fixing all accesary and screw etc.pointing around urinal and provision of waste pipe PVC suittable for urinal pot complete all as specified and directed. |
| 72 | M&L for 25mm thick Black granite Polished (Both Side) with rounded edge, fixed to wall by cutting and pinning and making good in CM 1:3 as in Urinal Partition complete all as specified and directed. |
| 73 | M&L in repair for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and directed. |
| 74 | M&L for 80 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment ,(M-40) grade, complete all as specified and directed. Note : Clours as approved by GE |
| 75 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed. |
| 76 | M&L for anodised aluminium framed workfor door, window / vent (powder coated)aluminiumwith one or more rebated incl jointed cleat for fixing etc complete all as specified and directed. |
| 77 | M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed. |
| 78 | M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incljoining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down complete all as specified and directed. |
| 79 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 80 | M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathedmulti stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathedmulti stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through inconcealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm diaalong with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. |
| 81 | All as per item No 80above but 5 Amp socket outlet, independent board. |
| 82 | All as per item No 80above but on the same board. |
| 83 | All as per item No 80 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly. |
| 84 | Supply & fixing of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed. |
| 85 | Supply & fixing of switch 15 Amps SP one way ISI Marked complete all as specified and directed. |
| 86 | Supply & fixing of socket outlet 3 pin 5 Amps flush type complete all as specified and directed. |
| 87 | Supply & fixing of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and directed. |
| 88 | S&F ceiling rose,3 phase/PVC/Polycarbonate,isolated body complete all as specified and directed. |
| 89 | M&L for submain wiring of copper cable single core of size 4 Sqmm in two run with earth wire 4 Sqmm single run for continuity complete all as specified and directed. NOTE :- 2 runs of 4 Sqmm cable and one run of 4 sqmm wire shall be measured as one running meter for the purpose of measurement and payment. |
| 90 | S&F wall mounting box typeLED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver1x20 watt comprising of strong jointless CRCA bodycomplete with all accessoriesccomplete all as specified and directed. |
| 91 | S&Fix MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed. |
| 92 | Supply& fixing inMCB SP 6 to 32 amps 230 Volt complete all as specified and directed. |
| 93 | S&F of MCB SPN 32 Amps 230 Volts complete all as specified and directed. |
| 94 | Supply and fix exhaust fan sweep 300 mm in replacement made up of sturdy engineering metal body complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed. |
