|
| 1 | M&L for preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applyingtwo coat of plastic emulsion paintcomplete all as specified and as directed. |
| 2 | M&L for preparation of old treated plastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applyingtwo coat of plastic emulsion paintcomplete all as specified and as directed. |
| 3 | M&L for preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of lustre paint (Oil Based) of ASIAN paint or equivalent of Berger/ Nerolaccomplete all as specified and as directed. |
| 4 | M&L for preparation of old treated plastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolaccomplete all as specified and as directed. |
| 5 | M&L for preparation of old plastered surfaces of walls/ceiling and applyingtwo coats of royale luster emulsion of asian paints or equivalentcomplete all as specified and as directed. |
| 6 | M&L for preparation of old plastered surfaces of wall and applying two coats textured paint including base coat of asian paints or equivalent complete all as specified and as directed. |
| 7 | M&L for fixing of 3D wall paper (selected colour) including complete removal of existing tretment on wall and applying 1 to 1.5 mm thick wall care putty , scrubbing with sand paper to make a surface smooth complete all as specified and directed. |
| 8 | M&L for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or morecoats of melamine polish complete till glossysurface is obtained complete all as specified and as directed. |
| 9 | M&L for scrapping out old treated wooden surfaces in door/windows sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or morecoats of melamine polish complete till glossysurface is obtained complete all as specified and as directed. |
| 10 | M&L for scrapping out old treated wooden surfaces in ceiling sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or morecoats of melamine polish complete till glossysurface is obtained complete all as specified and as directed. |
| 11 | M&L for preparation of surfaces and applying two coats of 100% acrylic exterior emulsion paint tomangalore tiles on roof, parapet walletc, onbuildingcomplete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 12 | M&L for preparation of old decorated surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 13 | M&L preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying wall care putty wherever required, smoothen surface by sand paper and applying one coat of OBDcomplete all as specified and as directed. |
| 14 | ditto as per item no 13 but applying two coats of Oil bound distemper on wall surfaces all as specified and directed. |
| 15 | M&L for applying one coat of Oil bound distemper on ceiling surfaces all as specified and directed. |
| 16 | M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed. |
| 17 | M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint all as specified and directed. |
| 18 | M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint. |
| 19 | M&L for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 20 | Dismantling floor, hearth or wall tiling removingrubbish off the premises complete all as directed. |
| 21 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub basecomplete all as specified and as directed |
| 22 | M&L fordouble charged vitrified ceremic tiles 10 mm thick of approved shade/ wooden texture (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shadecomplete all as specified and directed. |
| 23 | M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade/Wooden texture as in vertical surfaces, skirtingetc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shadeover and including backing coat of 10mmthick in cement mortar 1:3complete all as specified and directed. |
| 24 | M&L for 25mm thick coloured Glossy rubber moulded Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6)for laying floor finishes complete all as specified and as directed. |
| 25 | M&L Machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60 mm thk, M35 grade in floor/ pavment laid over and including 30 mm thick crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. |
| 26 | M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screedbed of 20mm thick in CM (1:6) complete all as directed. |
| 27 | M&L forNon Skid ceramic tiles 7 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mmthick cement mortar 1:4 complete all as specified and directed. |
| 28 | Ditto all as per item No 27 above but in skirting / dado ( area n.exc 0.09 Sqm) on vertical surfaces incl 10 mm thick backing coat cement plaseter in 1:4 complete all as directed |
| 29 | M&L for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thickas in dado/ skirting of any colour and highlighter pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3)complete all as specified and as directed. |
| 30 | M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7mm thickas in dado/ skirting of any colour and highlighter pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3)complete all as specified and as directed. |
| 31 | M&L granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed ofCM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed. |
| 32 | M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cementslurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed. |
| 33 | Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge. |
| 34 | M&L Brick work with fly ash old size bricks,straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed. |
| 35 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. |
| 36 | M & L for rendering 10mm thickin CM (1:6) on brick masonry internal surfaces of wallsfinished even and smooth without using extra cement. |
| 37 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces with sagol finish upto 12.0m height of Bldg with using @ 2% WPC of cement complete all as specified. |
| 38 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 39 | M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of primer over a thin layer(1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete all as specified. |
| 40 | Dismantling structural steel work including doors, gates, framed truss etc. complete all as directed. |
| 41 | S&F for mild steel work in tubular /square/rectangular trusses , purlins etc including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 42 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable asbestos/ Galavalume sheet (Corrugated, Semi corrugated etc.) sheets all as specified and as directed. |
| 43 | Ditto all as per item no 42 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as directed |
| 44 | S&F for fibre glass reinforced translucent corrugated/plain sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc including taking down existing complete all as specified and as directed. |
| 45 | M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying redoxide primer and two coat of synthetic enamel paint. |
| 46 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 47 | All as per item No 46 abovebutexc. 1.5 sq.m but n exc 4 sqmeachcomplete all as specified and directed |
| 48 | Taking down old door shutter exc 1.0 sq. m but n exc 2.0 sqmeachcomplete all as specified and directed |
| 49 | S&F Aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 50 | S&F Aluminium Powder coated (Thickness or powder coating not less than 50 micron) window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1no.)complete all as specified and as directed. |
| 51 | S&F for powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm handles 2 Nos in each shutter, 200 mm tower bolt 01 No in each shutters , 100 mm 03 Nos stainless steel hinges in each shutter, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 52 | S&F in 5-6 mm thick ACP (Aluminium composite panel) Sheet of selected quality, fixed with aluminum frame work in aluminium doors including aluminium beading and neoprene rubber complete all as specified. |
| 53 | S&F5 mm thick Sheet glass, selected quality, in squares exc. 0.5 sq. m eachpane glass, each pane fixed with aluminum frame work complete all as directed |
| 54 | S&F8 mm thick Sheet glass, selected quality, cutting in required size and fixed in shelves with necessary fittings incl chamfered the edges complete all as directed |
| 55 | S&F in repair12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including necessary fiittigs , cutting to shape, drilling holes required. complete all as specified and as directed. |
| 56 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sqm in each, complete all as specified and as directed. |
| 57 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sqm in each extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side ,complete all as specified and as directed. |
| 58 | S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg including necessary scaffolding etc complete all as specified. |
| 59 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless wire staples fixed on wood frame complete all as specified & directed. |
| 60 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless wire staples fixed on wood frame complete all as specified & directed. |
| 61 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rivet125 mm x 50 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum,all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 62 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 85 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 63 | S&F for Glazed and skeleton shutters, in second class hard wood 30 mm thick ,open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed. |
| 64 | S&F for 30 mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm lipping patti for all around the shutters complete all as specified and as directedall as specified,complete all as specified and directed. |
| 65 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling ofwood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 66 | S&F 1st classhardwood decorated/designed beading area of xsection n exc. 6.25 Sqcm incl two coats of malamine polish fixing in glazed shutters with nails complete all as specified and directed. |
| 67 | S&F 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 68 | S&F for 1st class hardwood, 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, with moulded bead is provided and planted round the panels (for each side),complete all as specified and directed. |
| 69 | S&F Stainless steel butt hinges medium weight 100mm all as specified and directed.NOTE :- All screws shall be self tapping chrome plated and length ofscrew not less 38 mm |
| 70 | S&F 300 mm long Stainless steel sliding door bolts, plate type,bright bolt not less than 12mm dia with and including a mini of 6 bolts and nuts, four on bolt plate and two on staple plate (selected quality as approved ) all as specified. |
| 71 | S&F stainless steel tower Bolt of 200 mm long ( selected quality as approved )fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 72 | S&F stainless steel handle of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 73 | S&F for floor door stopper of SS body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 74 | S&F in repairs 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked,complete all as specified and as directed. |
| 75 | S&F in repairs 300 mm long brass tower Bolt ( selected quality as approved )fixed with Self Tapping brass colour screws all as specifed and directed by Engr-in-Charge |
| 76 | S&F in repairs 600 mm long brass tower Bolt ( selected quality as approved )fixed with Self Tapping brass colour screws all as specifed and directed by Engr-in-Charge |
| 77 | S&F brass butt hinges medium weight 150mm all as specified and directed.NOTE :- All screws shall be self tapping brass colour and length ofscrew not less 38 mm |
| 78 | S&F in repairs brass floor door stopper, overall length of cover plate 150mmall as specified and as directed. |
| 79 | S&F in repair brass handles of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 80 | S&F in repair brass handles of 200 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 81 | S&F in repair brass handles of 300 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 82 | Supply and fixing in repairs 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified. |
| 83 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kgISI Marked complete all as specified and directed. |
| 84 | S&F in repairs for antique brasscurtain rod of 25mm dia, decorative type,complete all as specified and as directed. |
| 85 | S&F in repairs antique brass double hook brackets for curtain rod, decorative type, complete all as specified and as directed. |
| 86 | S&F in repairs brass Mortice lock, vertical type, size 100 mm 4 Levers complete all as specified and as directed. |
| 87 | S&F in repair brass heavy duty inbuilt lock with 2 handels and 03 keys ,vertical type, fixed in door complete all as specified Make : Goodrej or equivalent |
| 88 | S&F 18/19mm thick ply wood for insulation purposes fixed fixed with to timber framed work inl taking down with existing one complete all as directed. |
| 89 | S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white or any colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 90 | S&F auto closing hinges with stainless steel screws including taking down with existing one complete all as directed |
| 91 | M&L fpr providing Plywood, grade BWP 18 mm thick, type BB, fixed with screws to timber frame work as in cupboard and shelf ,cabinet etc, complete all as specified and directed. |
| 92 | M&L for providing Decorative laminate type 1,with 0.9 mm thicknessof surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions |
| 93 | S & F in repairs Magnet window catcher (round/ square)and connected plate to shutters and frame, complete all as specified and directed. Make; Prayag, Cat Part No- MDC-W55,or equivalent . |
| 94 | S&Fin repairs stainless steel Handle of 75 mm size (modular selected quality of design as approved) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 95 | S & F continuous (piano) hinges, stainless steel,width of flaps (when open) in 30mm, 0.8mm thickness complete all as specified & directed. |
| 96 | M&L for vitreous china premium 1st quality Wall hung WC make American Standard (Signature)incl UF soft close seat cover white/ivory/off white incl necessary fittings, washers complete all as specified Make : American StandardModel (Signature) No CCAS3140-3W20400F0 |
| 97 | M&L for UF soft close white seat cover incl necessary fittings for Wall hung WC make American Standard (Signature) Model No CCAS3140-3W20400F0 complete all as specified |
| 98 | S&F in repair white full pedestal type wash hand basin of size 620 x 480 x 185 mm with pedestal height 820mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe complete Make:Jaquar FNS-WHT-40801. |
| 99 | S&Fin repair 3 function hand shower set with push button chorium finish body with 1.2m long flex tube in chrome finish and wall hook complete all as specified and directed. Make : American Standard Model No F40017-CHADY |
| 100 | S&Fin repair super thin stainless steel over head shower size 300x300 mm fixed with 15 mm bore pipe complete all as specified and directed. Make : American Standard Model No FFASS034-000500BC0 |
| 101 | S&Fin repair chormium plated wall mounted onyx spoutwith diverter complete all as specified and directed. Make : American Standard model No-FF1-CN521X00000460 |
| 102 | S&Fin repair chormium plated diverter model Acacia evolution concealed type bath and shower mixer with necessary fittings complete all as specified and directed. Make : American Standard model No-FFASI321-608500BFO |
| 103 | S&F in repair single lever basin mixer for 15 mm bore pipe fancy type brass CP screwed down screwed for iron pipe or brass ferrule complete all as specified. Make: Make : American Standard model No Acacia E -FFASI301-102500BFO |
| 104 | S&F in repair Bath Tub Spout With Button Attachment For Hand Shower With Wall Flange for 15 mm bore pipe fancy type brass CP screwed down screwed for iron pipe or brass ferrule complete all as specified.make Jaquar Continental prime SPJ-463PM |
| 105 | S&F in repairs, chromium plated long body bib cock with wall flange15mm dia Cat No.FUS 29037 of make Jaguar or equivalent of make as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 106 | S&F Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated)make Jaquar SNR-51097 |
| 107 | S&F 6 volt Battery for Urinal Sensorof any make or any type complete all as specified and directed. |
| 108 | S&Fin repairs chromium plated single towel rail 600mm longincluding built in side brackets ,make Jaquar Cat No. ACN-1111SM all as specified and as directed. |
| 109 | S&Fin repairs chromium plated square towel ring with round flange,make Jaquar Cat No. ACN-1121N all as specified and as directed.\"A\" as approved by GE all as specified and as directed. |
| 110 | S&Fin repairs soap dish holder Cat part no FFAS1482-908500BF0 of make American Standard all as specified and as directed. |
| 111 | S&Fin repairs soap dispenser holder with glass bottleCat part no ACN-1135N of make Jaquar all as specified and as directed. |
| 112 | S&F Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal MirrorCat part no ACN-1193N of make Jaquar all as specified and as directed. |
| 113 | S&Fin repairs chromium plated toilet paper holder ,Cat No. FFAS1489-908500BF0 of make American Standard all as specified and as directed. |
| 114 | S&Fin repairs Towel Rack 600mm Long with Lower Hangers, Stainless Steel,Cat No. ACN-1181S of make Jaquar all as specified and as directed. |
| 115 | S&Fin repairs chromium plated Hand Shower (Health Faucet) 1.2 Meter Long Flexible Tube & Wall Hook Cat Part No. CLTP405-CHZZ of make American Standard all as specified and as directed. |
| 116 | S&Fin repairs chromium plated two way bib cock with wall flange 15mm dia all as specified and as directed Cat No. KUP-35041PM make Jaquar |
| 117 | S&Fin repairs chromium plated fittings angular stop cock with wall flange 15mm diaall as specified and as directed.Cat No. KUP-35053PM make Jaquar |
| 118 | S&Fin repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs all as specified and as directed. Cat No. FUS-29281 of make Jaquar |
| 119 | S&F in repair bevelled edge 5 mm thick looking mirror fixing with 04 Nos stainless steel studs complete all as specified and as directed. |
| 120 | M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed. |
| 121 | M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as as diirected. |
| 122 | S&Fin repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd |
| 123 | S&F rotational moulded polyethylenewater storage tank 3 layer black/white colour water tank, non- toxic effect, algea foRMation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 2000 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic balland 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. |
| 124 | Material and labour for 7 to 8mm thick PVC laminated board false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid workwith using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 2.0mm dia GI wire and \"J\" bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken,New Age (ACE). |
| 125 | M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required)including dismantling of existing board complete all as specified and directed. Make : Gyproc-saint Gobain/Armstong/Diaken. |
| 126 | M&L for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling complete all as specified and as directed. |
| 127 | M&L for 20 to 25mm thick 1st Class Hardwood planks (Boarding) Teak wood of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring with interlocking arrangement of tongue and groove joint and applying two or more coats (till glossy finish is obtained) of melamine polish over a coat of sealer and melamine filler incl filling the joints complete as per manufacturers instruction. |
| 128 | Dismantling and Refixing of old wooden flooring obtained from after cutting damaged edges, burning of old paint if any, and preparation of wooden surfaces and applying two or more coats of melamine polish over a coat of sealer and melamine filler complete till fine glossy finish is obtained complete all as specified and as directed. |
| 129 | S&Fin reapirsDesigner (matching to existing) AC Eaves/ Weather Boarding 12mm thick , any size shape and design as approved by GE including taking down existing boarding upto 15 Mtr height of building complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest |
| 130 | Dismantling and refixing of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry complete all as specified and as directed |
| 131 | S & F of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry incl dismantling of existing tiles complete all as specified and as directed |
| 132 | S & F of Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 incl dismantling of existing tiles complete all as specified and as directed |
| 133 | M&L for second class hardwood battens squar/rectangular in section at 30 cm centres, Clean sawn secured with nails or brads sec exc 5 sqcm but n exc 15 sqcm including dismantling of existing complete all as specified and directed. |
| 134 | Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm eachand applying chemical treatment with GLYPHOSATE 41% and making good surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 135 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
