|
| 1 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 2 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m and n.exc 4.00 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any descriptionexc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 5 | Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed |
| 6 | Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed |
| 7 | Refixing of Shutters of any description n exc 1 sq. m each in same opening complete all as specified and directed |
| 8 | Refixing of Shutters of any descriptionexc 1 sq. m and n.exc 2 sqm each in same opening complete all as specified and directed |
| 9 | S&F2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 10 | S&F35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F30mm thick 2nd class HW Glazed and skeleton shutters for windwos and ventilators, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed. |
| 12 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 13 | M&L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 14 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 15 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 16 | S & F Powder coated ( minimum thickness of powder coating 50 micron) Anodised aluminium frames/ shutters for doors, windows, ventilators with one or more rebates including joining cleat, rubber gasket,for fixing etc complete all as specified and directed. |
| 17 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 18 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty or wooden beadsin squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 19 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | S&F 100mm size, cold rolled mild steel butt hinges medium weight and fixed to chowkats with screws etc complete all as specified and directed. |
| 21 | S&F 150mm size Extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 22 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt of size 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 24 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (overall length of cover plate 140mm) complete all as specified and directed. |
| 25 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 26 | Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 27 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 28 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or wooden beads complete all as specified and directed. |
| 29 | S&F in repair 100mm size cold rolled mild steel butt hinges medium weight and fixed to chowkats with screws etc complete all as specified and directed. |
| 30 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 31 | S&F in repair 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 32 | S&F in repair Aluminium alloy, anodised, sliding door bolt of size 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 33 | S&F in repair continuous (piano hinges) mild steel bright finish or electrogalvanised having width of flap 30mm (when open) complete all as specified and directed. |
| 34 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 35 | S&F in repair Brass 2 lever mortice locks,size 65 mm, grade I fixed to cupboard, complete all as specified and directed. |
| 36 | S&F in repair Mild steel 2 lever mortice lock vertical type, size 100mm fixed to flush door or aluminium door shutters complete all as specified and directed. |
| 37 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 38 | S&F in repair 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 39 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (overall length of cover plate 140mm) complete all as specified and directed. |
| 40 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type of aluminium cast iron body , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 42 | S&F mild steel hold fasts and similor works etc conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 43 | M&L for Framed work such as grills, gratings, angle iron frames /door works etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, truss and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 44 | S&Fmild steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. |
| 45 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 46 | S&F (in repair) 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 47 | S&F in repair 25mm dia Stainless steel tubular curtain rod incl fancy type brckets both side fixedcomplete all as specified and directed. |
| 48 | S&F Steel rolling shutters made out of 1mm thick steel sheet, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 49 | All as per item No. 48 here in before but gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 50 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 51 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 52 | Repairing of steel rolling shutters, with ball bearing, as specified including greasing oiling, anchoring etc erect hasp and staple in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 53 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 54 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 55 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in. roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 56 | S & F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC-15) of approved design / pattern, with approved standard section and fixed to the existing window with CP brass / stainless steel screws @ 200mm centre to centre includig cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised standard section around the opening complete all as specified and directed |
| 57 | S & F in repairs steel window of profile frame 80mm x 40mm fabricated out of 1.25mm thick MS sheet and shutters made out to F7D-Z section as per IS 1038 (double shutter i.e. one mosquito proof shutter and one glazed shutter) including spring latches for glazed shutters, flat latches for mesh shutter, box type hinges with necessary holdfast etc including guard bar & filling the frame with PCC 1:3:6 type C-0 including one shop coat of red oxide primer for steel surfaces complete all as specified and directed |
| 58 | S & F in repairs welding exc 2.5 cm but n exc 5 cm in length thickness of metal to be welded Exc 6 mm but n exc 9mm complete all as specified and directed |
| 59 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. |
