|
| 1 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil, completespecified and directed. |
| 2 | Surface excavationn.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil, completespecified and directed. |
| 3 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point completespecified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm completespecified and directed. |
| 5 | M&L for PCC 1:3:6 type C1 (using 20mm nominal sizegradedcrushed stone aggregate) as in surface channels & drains , complete specified and directed. . |
| 6 | M & L for extra forming fair finished drain or channel any girthin cement concrete using extra cement including forms, moulds mitred/stopped ends etc for 300mm girth,complete specified and directed. |
| 7 | M & L brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4, complete specified and directed. |
| 8 | M & L for Broken stone orboulders hardcore of gauge exc. 63 mm and n exc 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete specified and directed. |
| 9 | M&L 15mm thick rendering onbrick work or concrete wall surfaces in cement mortar 1:4, finished even & smooth with using extra cement complete in all respect as specified and directed. |
| 10 | M&L for Sand filling under floors or in foundations including watering and consolidation complete in all respect as specified and directed. |
| 11 | M & L 100 mm thick PCC (1:3:6) type C-1 using 20 mm nominal size crushed and graded stone aggregate laid in floor, path etc. or of similar type finished the surface even and fair without using extra cement complete in all respect as specified and directed. |
| 12 | M & L for PCCtype B- 0, 1:2:4 (12.5 mm graded aggregate) 40 mm thk as in floor finish the surface even and fair using extra cement complete in all respect specified and directed. |
| 13 | M & L PCC 1:2:4 type B-0 (using 12.5 mm nominal size crushed and graded stone aggregate) as in coping, hold fasts or of similar items including necessary cutting, form work etc. complete in all respect as specified and directed. |
| 14 | M&L for precast Perforated RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respcet as specified and directed |
| 15 | S&FTMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and directed. |
| 16 | S&FTMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and directed |
| 17 | S&F mild steelHand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, baluster, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts; complete all as specified and directed. |
| 18 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp complete in all respect as specified and directed. |
| 19 | M&L for Two coats of synthetic enamel paint over one coat of red oxide primer after preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and directed. |
| 20 | M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate)as in foundaion and mass fillingcomplete in all respect as specified and directed. |
| 21 | M&L for applying three coat of white whas on newly plastered surface of wall including preparation of surface complete in all respect as specified and directed. |
| 22 | M&L for 1.5 mm thk Plastic diving strip of width 38mm fixed before concreting all compacting complete in all respect as specified and directed. |
