|
| 1 | Round Coffee Table - Providing, supplying & placing of Round Coffee Table 600 mm Dia x 450 mm Height having top made up of ply wood - 18mm Thick. The top should be in 1 mm laminate & base in 0.8 mm Laminate, Color matching to running Color Scheme or as desired by the Engineer in Charge. All the edges should be finished with glued - on polypropylene edge bands with corner and edge rounding, enabling zero sharp elements environment. There should be Powder coated base in Trirod Pattern made up of 18 mm dia Round Bright Bar and the Powder coating of all the metal units must be of 70 micron 7 tank process with oven baking powder coated from approved make. The minimum factor of safety is 1.65 on yield stress, the allowable deflection will be limited to span/200. The item should include all other features as shown in photograph and 3D views but missed in description all complete as per the direction of Engineer in Charge. |
| 2 | Revolving Mesh Chair - Providing, supplying & fixing Revolving Mesh Chair with Overall Dimension: 570 W X 530 D X 890-1000 H mm having Seat Ht. 390 - 510mm. The revolving chair with Center Pivot Mechanism with 360 degree swivel, 17 degree tilt, tilt tension adjustment, upright locking, Pneumatic height adjustment. 117.5 cm H, Seat are made up of 1.2cm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam (moulded with minimum density = 45 +/- kg/m3 and hardness = 20 +/- 2) together with moulded seat and back covers. The back is designed with contoured lumbar support for extra comfort. Mesh is provided to support to back as the shape of the back. The seat is covered with injection moulded in black co-polymer polypropylene, and the back cover is a vacuum formed from an ABS sheet. Armrests made of black integral skin polyurethane with 50 - 70 shore \"A\" hardness and reinforced with MS insert. The armrests are scratch and weather-resistant. The armrests are fitted to the seat with a seat/armrest connecting strip assembly made of 0.5cm thick HR steel. The pedestal is made of HR steel and fitted with 5 nos. twin castors (twin wheel castors are injection moulded in 30% glass-filled black Nylon) complete. The item includes all other features as shown in the photograph and 3D views but is missed in the description all complete as per direction of Engineer in charge. |
| 3 | Medium Height Storage - Providing, supplying & fixing Storage with Size : 900 W X 450 D X 750 H mm Complete having the top is made up of 25mm plywood. side and back are made up of 18mm thick plywood. Storage is assembled with 2 Drawers & 2 Shutters with one shelf inside shutters. The plywood should be with 1 mm Laminate both side with Color matching to running Color Scheme or as per the direction of Enginer in Charge.All edges finished with glued - on polypropylene edge bands with corner and edge rounding, enabling zero sharp elements environment & Edge band shall be 2.0 mm and Each drawer and shutter shall have handle options- Bow Type, knobs & Stainless Steel handles. The Base shall have basic straight skirting. The item include all other features as shown in photograph and 3D views but missed in description all complete as per direction of Engineer in charge. |
| 4 | Workstation Table with pedestal - Providing, supplying & fixing of Workstations of size (4 seats) 2100 W x 1100 D x 750 H mm with pedestal storage and the following specifications:Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thickness of Panel based System shall be minimum 60-70 mm. The thickness of main spine partition panel shall be minimum 60-70 mm & minimum 25-28mm/60 mm thick for return spine. The panel will be hollow from inside to accommodate wiring for electrical/data and outer frame of panel should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the wire management. The panel outer aluminium frame is designed in such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other. Horizontal race way shall be 150-170 mm height aluminium profile. There shall be a complete cable management arrangement with an openable raceway above/ below the worktop with provision for fitting electrical/data switches and holes for passing cable.Panel Finishes: Finishes of the panel above the worktop can be fabric pinup/fabric/laminate + Glass/metal writable marker board or single finish tile with a raceway on the main spine—finishes of the main spine panel below the worktop. The hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF, powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. Raceway can be provided above/below the worktop.Connectors/ Brackets: Aluminum End Post, two way, three way, four way post provided as per design. Brackets for top support and connectors made of 1-1.2mm thk metal with powder coating of desired color.Worktop : Worktop made up of 25mm thick plywood finished with 1 mm laminate on top and bottom with 2mm ABS edge banding. The exposed edge of the worktop shall be secured with 2mm thick PVC edge banding tape of approved colour. The height of the Worktop shall be 740-760 mm from ground level. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. The item includes all other features as shown in the photograph and 3D views but is missed in the description all complete as per direction of Engineer in charge. |
| 5 | 2 Seater Sofa Type 1 - Providing, supplying & fixing a 2-seater Sofa with Size: (1440 W x 850 D x 779 H mm) made up of a basic structure of 16-gauge 25 mm x 25 mm metal wielded structure covered with 6mm ply to provide shape & it shall be wrapped with 50 density High-density foam & further with commercial grade Fabric. Fabric should be Fire retardent fabric. The SS studs Legs shall be provided at the base. All item shall be Upholstered with removable Polyester Fabric having Martin - Dale Abrasion resistance >= 40000 Cycles, Color fastness to lighting - 4 to 5, Composition -100% Polyester and Weight - 330 GSM. The item includes all other features as shown in photograph and 3D views but missed in description all complete as per direction of Engineer in charge. |
| 6 | Rectangular Coffee Table - Providing, supplying & fixing Coffee Table Size - 900 W X 600 D X 450 H mm having top made up of 18 mm thick Plywood. The top should be in 1 mm laminate & base in 0.8 mm Laminate, Color matching to running Color Scheme or as desired by the Engineer in Charge. All the edges should be finished with glued - on polypropylene edge bands with corner and edge rounding, enabling zero sharp elements environment. There should be Powder coated base in Trirod Pattern made up of 18 mm dia Round Bright Bar and the Powder coating of all the metal units must be of 70 micron 7 tank process with oven baking powder coated from approved make. The minimum factor of safety is 1.65 on yield stress, the allowable deflection will be limited to span/200. The item should include all other features as shown in photograph and 3D views but missed in description all complete as per the direction of Engineer in Charge. |
| 7 | 3 Seater Sofa- Providing, supplying & fixing a 3-seater Sofa with Size: (2010 W x 850 D x 779 H mm) made up of a basic structure of 16-gauge 25 mm x 25 mm metal wielded structure covered with 6mm ply to provide shape & it shall be wrapped with 50 density High-density foam & further with commercial grade Fabric. Fabric should be Fire retardent fabric. The SS studs Legs shall be provided at the base. All item shall be Upholstered with removable Polyester Fabric having Martin - Dale Abrasion resistance >= 40000 Cycles, Color fastness to lighting - 4 to 5, Composition -100% Polyester and Weight - 330 GSM. The item includes all other features as shown in photograph and 3D views but missed in description all complete as per direction of Engineer in charge. |
| 8 | High Table- Providing, supplying & fixing of High table of size 1500 W x 500 D x 1050 H mm. The top should be made up plywood of 25 mm Thick, finished with a 1 mm laminate on top and 0.8mm laminate at bottom. All edges are finished with glued-on polypropylene edge bands with corner and edge rounding, enabling zero sharp elements environment. It shall be provided with MS 2 mm thick metal Powdercoated base in 50 mm x 25 mm top pipe supported with 32 mm dia. round pipe. The Powder coating of all the metal units must be of 70 micron 7 tank process with oven baking powder coated. The minimum factor of safety considered is 1.65 on yield stress. The allowable deflection will be limited to span/200. The item includes all other features as shown in the photograph and 3D views but is missed in the description. |
| 9 | Height Adjustable Table- Providing, supplying & fixing of Height Adjustable table of size 1200 W x 600 D x 610/1255 H (Leg Height minimum 605mm & maximum 1255mm). Worktop : Worktop made up of 25mm thick Plywood finished with 2mm ABS edge banding. The exposed edge of the worktop shall be secured with 2mm thick PVC edge banding tape of approved colour. Height Adjustable Workstations worktop supported on MS electrical leg . Understructure: The understructure is made of 2mm thick Steel square pipe dimension 75 X 75 mm with Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method).Legs connected with Steel pipe with epoxy powder coated spray& beam at temperature 200C°. Leg Height minimum 605mm & maximum 1255mM from ground level.Motro speed is 36mm per second and Stroke is 650mm.The flexible vertical wire manager shall accommodate height of 605-1255mm. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513. Brackets are slide in between end trim and vertical extrusions. Workstation should have 28mm thick Fabric pinup+ marker board screen with aluminum frame with accessories bar to hang the accessories andheight 310-360mm from the worktop.Screen should be fixed on MS powder coated brackets 80-90 microns.Each workstation should be with fixed with wiring tray made of steel sheet thickness 1.2mm. Wire management: Completely concealed wire management with vertical wire uptake from floor viaflexible vertical wire manager , segregates to horizontal cable tray below aluminum flipper with soft closure Epoxy powder coated spray color, baked at temperature 200 C°. Raceways contain the horizontal cable channel that fitted below the top with supported brackets. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of approved colour. The height of the Worktop shall be 740-760 mm from ground level. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-620 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W). Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. The item includes all other features as shown in the photograph and 3D views but is missed in the description. |
| 10 | Movable Notice Board- Providing & fixing of movable Notice Board of Size-1243 W x 600 D x 1850 H mm Tri Wheel Board (One Side Writable & One Side Pinup Board) Made up of 9 mm acoustic sheet wrapped with suitable fabric as appvd by designer. Structure made up of 25 x 25 mm square pipe of 16 gauge thickness finished with powdercoating. Powder coating of all the metal units must be of 70 micron 7 tank process with oven baking powder coated. The minimum factor of safety considered is 1.65 on yield stress.The allowable deflection will be limited to span/200. Provided with 50 mm dia cators at base for easy movement. MS with metal powder coating . wheels with locking system. Whiteboard with ceramic coating. The item includes all other features as shown in the photograph and 3D views but is missed in the description. |
| 11 | Pentagon Ottoman- Providing, supplying & fixing of Pentagon Ottoman 549 W x 523 D x 450 H mm with Structure made up of polyurethane foam block of approved quality supported with 18mm thick ply at the bottom to fasten 50X25 mm nylon glides below it. Approved PU foam to have density of 50 + or - 2 kg/m3 having premium grade with moderate resilience shall be provided. Bent Plywood used for cnstruction of walls. 2. Fabric upholstery with 350 GSM, Abrasion resistance >= 20000 Cycles, and fire retardant.50 density Foam. PVC legs bottom Feet 50 X 25 mm nylon glides shall be provided below it as per direction of Engineer in charge. The item includes all other features as shown in the photograph and 3D views but is missed in the description. |
| 12 | 2 Seater Sofa Type 2- Providing, supplying & placing 2 2-seater sofa Seating of size 1200W x 741D x 825H mm, two-seater upholstered sofa featuring a solid high-density machine-injected foam seat and backrest, ensuring long-lasting comfort and durability. Its internal structure is crafted from MS (Mild Steel) or wooden framing, providing strength and stability. The sofa is elegantly upholstered with fabric of approved finish and colour, offering a premium aesthetic. Supported by wooden-finish legs, the base ensures a sturdy foundation while enhancing the overall fabric of 350-500 GSM, the density of the foam is 50+or- 2 kg/m3, fire retardant fabric, dried kiln Pinewood frame, wooden legs for sofa. |
| 13 | High Stool- Providing & Supplying High bar stool size: 480Wx 440Dx 990Hmm & seating Height is 760 mm, featuring an ergonomically designed curved seat with an integrated backrest, providing enhanced comfort and support. The seat is crafted with moulded foam padding over a sturdy wooden or MS frame and upholstered in premium leatherette or fabric as per the approved finish and colour. The sleek metal base with a powder-coated finish ensures durability and corrosion resistance, while the minimalist sled-style legs offer stability and a contemporary aesthetic. An integrated footrest adds extra comfort and non-slip foot caps prevent scratches on the floor. |
| 14 | 2 Seater Sofa Type-3- Providing & Placing sofa, structure Pressed and moulded wood of size 1240 W x 622 D x 736 H mm, supported by plywood in base. The cushion is Molded high-density foam (Polyurethane Foam) and jacketed with fabric with stainless steel legs designed in a \"U\" shape. The component specification shall be as follows Fabric of 350-500 GSM, Seat-50 Kg/cum density PU Foam, 100mm thick, Back–32-40Kg/cum density PU foam, 50mm thick, Sides (inside) - 32-40 Kg/cum density PU Foam, fire retardent fabric, 11mm thick Sides (outside) & back (back side)-35-40 Kg cum density PU foam, 13mm thick. The seat shell rests on stainless steel Legs. |
| 15 | Square Coffee Table- Providing, supplying & fixing Square Coffee Table Size - 600 W X 600 D X 450 H mm having top made up of 25mm plywood. The top should be in 1 mm laminate & base in 0.8 mm Laminate, Color matching to running Color Scheme or as desired by the Engineer in Charge. All the edges should be finished with glued - on polypropylene edge bands with corner and edge rounding, enabling zero sharp elements environment. There should be Powder coated base in Trirod Pattern made up of 18 mm dia Round Bright Bar and the Powder coating of all the metal units must be of 70 micron 7 tank process with oven baking powder coated from approved make. The minimum factor of safety is 1.65 on yield stress, the allowable deflection will be limited to span/200. The item should include all other features as shown in photograph and 3D views but missed in description all complete as per the direction of Engineer in Charge. |
| 16 | Overhead Storage- Providing and placing Overhead Storage, with a body constructed from 18 mm thick plywood in vertical member and 25 mm thick horizontal member for durability and strength. The shutters are made from 18mm thick plywood, featuring 2mm PVC edge banding for enhanced protection. Each shutter is fitted with an extruded stainless handle, ensuring a sleek and functional design. The complete storage should be lamintaed with 1 mm laminate of the desired colour from all sides and faces, before mounting on wall. The storage unit is equipped with a three-way locking mechanism, allowing the hinged doors to be securely locked at once. Additionally, the hinge-damping mechanism enables soft closing for noise reduction and smooth operation. These overhead storage units can be mounted on panels or walls. The specified wall-mounted storage measures 20 ft (L) x 2.5 ft (H) and is aligned with five workstations, providing ample organized storage for workspace efficiency. The item should include all other features as shown in the photograph and 3D views but missed in the description. All are complete as per the direction of the Engineer in Charge. |
| 17 | Desk Based Workstation- Providing and placing Desk Based Workstations with Pedstal with following specifications of size 1200 mm x 750 mm x 750 mm heightUnderstructure, Screen and Cable management : Desk based system worktop supported on understructure made of MS legs Sq/ Tapered Leg of section 38 x 38mm, where Structure made from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method). Screen: 28mm thick offset Fully alumium frame screen with Combination of Fabric Pinup &marker board , For Back to back workstation, screen height is 360mm above the top &for Non sharing/ single side screen plus modesty panel to be considered. Wire management: Completely consealed wire management with vertical wire uptake from floor via MS power pole having removable cover one side and wire seperator for data and wire seperation, segregates to hozizontal cable tray below aluminium flipper with soft closure Epoxy powder coated spray color, baked at temperature 200 C°. Raceways contain the horizontal cable channel that fitted with a modesty panel tidily and effectively. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 80-90 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method). Worktop: Worktop Made of 25mm thick plywood finished with 2mm PVC edge banding. E1 grade laminate with zero urea formaldehyde emissions ( |
| 18 | 2 Seater Ottoman- Providing and placing 2-Seater Ottoman of size 1100 W x 550 D x 450 H mm is designed for durability and comfort. Its structure is crafted from bent plywood, ensuring strength and stability. Fabric upholstery with 350 GSM and fire retardent. The seating is upholstered fabric of an approved colour or shade, providing both safety and an elegant finish. The 50 Kg/cum density PU Foam foam enhances comfort and longevity, making it ideal for extended use. Supported by sturdy PVC legs. The item should include all other features as shown in the photograph and 3D views but missed in the description. All are complete as per the direction of the Engineer in Charge. |
| 19 | 3 Seater Ottoman- Providing and placing 3-Seater Ottoman of size 1650 W x 550 D x 450 H mm is designed for durability and comfort. Its structure is crafted from bent plywood, ensuring strength and stability. Fabric upholstery with 350 GSM and fire retardent. The seating is upholstered fabric of an approved colour or shade, providing both safety and an elegant finish. The 50 Kg/cum density PU Foam foam enhances comfort and longevity, making it ideal for extended use. Supported by sturdy PVC legs. The item should include all other features as shown in the photograph and 3D views but missed in the description. All are complete as per the direction of the Engineer in Charge. |
| 20 | Triangluar Coffee Table - Providing and placing Triangular coffee table OF SIZE 600D x 600W x 450H MM made up of 25mm thick Ply Board with 0.8mm thick laminate finished with matching Edge-Banding of 2 mm PVC Lipping. The understructure is made of wooden legs With MS Bracket for support. |
