|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Electric Division-I JPDCL Jammu. Name of Work: Rate Contract for providing of allied material and T&P items required for Reclamation / Repair/ Re-build of Damaged Distribution Transformers of various capacities ranging from 25KVA to 630 KVA and Power Transformers for Divisional Workshop under the jurisdiction of Elect. Div-I JPDCL, Jammu for the FY 2026-2027. Contract No: Enit No. 09 of 2026-27, Dated 19-02-2026 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # |
| 2 | Item Description |
| 3 | LT Bush Rods (M-12) |
| 4 | LT Bush Rods (M-20) |
| 5 | LT Bush Rods (M-30) L.V. Bush Rods M-30/M-40 |
| 6 | L.V. Bush Rods M-12/M-20 (33 KV) |
| 7 | HT Bush Rods (11 Kv) |
| 8 | H.V. Bush Rods 20mm (33 KV) |
| 9 | LV. Brass Bush rods 12 mm.(In exchange of burnt / damaged one) |
| 10 | LV. Brass Bush rods 20.mm(In exchange of burnt / damaged one) |
| 11 | LV. Brass Bush rods 30/40.mm (In exchange of burnt / damaged one) |
| 12 | LV. Brass Bush rods 12/20mm (33KV) (In exchange of burnt / damaged one) |
| 13 | HV. Brass Bush rods (11 KV) (In exchange of burnt / damaged one) |
| 14 | HV. Brass Bush rods 20 mm (33KV) (In exchange of burnt / damaged one) |
| 15 | LV Bushings (12mm) |
| 16 | LV Bushings (20mm) |
| 17 | LV Bushings (32/30 mm) L.V. Bush Insulators M-30/M-40 |
| 18 | L.V. Bush Insulators (33 KV) |
| 19 | HT Bushing (11 Kv) |
| 20 | Film Paper |
| 21 | Lethoride Paper/Khakhi Paper |
| 22 | Press Boards/ Packing sheet |
| 23 | Gutties |
| 24 | Rubber Washer of Sizes |
| 25 | LT/HT Washers |
| 26 | LT Washers M-12 |
| 27 | LT Washers M-20 |
| 28 | LT Washers M-30/M-40 |
| 29 | Cork Sheets (1000mmx500mmx5mm) |
| 30 | Rubberized Cork strip(40mmx5mm) |
| 31 | Bakelite Tubes |
| 32 | Cotton Tape |
| 33 | Bovin Tape |
| 34 | M.Seal |
| 35 | Fevicol |
| 36 | Glass Sleeves |
| 37 | Nawar Tape/Bobin Tape |
| 38 | Insulation Gum |
| 39 | Wooden Wedges |
| 40 | Craft Paper |
| 41 | Aluminum Gutka |
| 42 | Nuts & Bolts |
| 43 | H.T. Bush Clamps |
| 44 | Copper Brazing Rod |
| 45 | Aluminum Brazing Rod |
| 46 | H.T / L.T Oil Seals-12 |
| 47 | H.T / L.T Oil Seals-20 |
| 48 | H.T / L.T Oil Seals-30/40 |
| 49 | Cotton Waste (Old Cotton Sarres/Cloth) |
| 50 | M.S Washers for L.T Connections |
| 51 | Plugs of different sizes ¾” 1¼” 1” ½” |
| 52 | Grey Paint |
| 53 | Turpentine oil |
| 54 | Varnish |
| 55 | Welding Rods (8mm & 10mm) |
| 56 | Oven Heating/Elements Coils |
| 57 | 3½ Multi Stands Cu Cable (10 mm ) |
| 58 | Thinner |
| 59 | Crepe Tape |
| 60 | Oxygen Cylinder (Refill) |
| 61 | Meggar (5000Volt, 5000 M Ohms) |
| 62 | Oxygen Regulator |
| 63 | Oxygen Cylinder No.zzle |
| 64 | Oxygen Pipe for Gas Cutter |
| 65 | Clamp for Oxygen Pipe |
| 66 | C Clamp 18” |
| 67 | Hydraulic Transformer Lifting Trolley |
| 68 | Trolley for Scrap Loading/Unloading |
| 69 | Clamp Meter |
| 70 | Welding Helmet |
| 71 | Welding Cable with Holder |
| 72 | Cutter Pliers |
| 73 | Screw Driver (all sorts) |
| 74 | Ratchet Wrench with Socket Set compete |
| 75 | Pipe Wrench 12” |
| 76 | Pipe Wrench 18” |
| 77 | Bolt Cutter 12” |
| 78 | Bolt Cutter 18” |
| 79 | Spanner 15/21 MM |
| 80 | Spanner 38/48 MM |
| 81 | Oven Thermostat (0-300 Amp) |
| 82 | Oven Heaters |
| 83 | Contractor 63 Amp L&T Make |
| 84 | Cable Wire 16 mm. |
| 85 | Filter Plant High Pressure supply Hose 25 MM (1”), 35 bar/500 PSI |
| 86 | Filter Tank Pipe Rubber |
| 87 | Wooden Frames for Winding of HT /LT |
| 88 | Exhaust Fans for Workshop 18”/24”Heavy Duties |
| 89 | Pedestal Fans for Workshop (600mm) |
| 90 | Out Side Clipper for Winding Machines |
| 91 | In Side Clipper for Winding Machines |
| 92 | Heavy Duty Drill Machine (1050 Watt) |
| 93 | Scissors (large size for cutting papers) |
| 94 | Test Cell of oil Testing Machine (60KV) (500 ML/ Acrylic Test Cell) with removable & adjustable electrodes |
| 95 | HT/LT Winding Machines Bearing |
| 96 | HT/LT Winding Machines Bearing VEE-Belts |
| 97 | HT/LT Winding Machines Bearing Gear-Box |
| 98 | HT/LT Winding Machines Bearing Foot-Switch |
| 99 | HT/LT Winding Machines Bearing Counters |
| 100 | 1 HP Pump Motor Centrifugal |
| 101 | Change Over Switch 400 Amp |
| 102 | Scale Steel 1 meter |
| 103 | Scale Steel 12 Inch |
| 104 | EOT Crane Switch |
| 105 | Angle Grinder (850 Watts) |
| 106 | Air Blower Macine (900 Watts) |
| 107 | Digital Micrometer 0 to 25 mm |
| 108 | LPG 19 Kg (Refill) |
| 109 | Laminated Core of Al Sorts |
| 110 | Multi Stand 3 Core Copper Cable 10 sqmm |
| 111 | Testing Clips |
| 112 | Saw Dust |
| 113 | Dust Sand |
| 114 | Led Light 150 watt |
| 115 | Led Light 200 watt |
| 116 | Steel Sand Buckets |
| 117 | Fire Extinguisher Mechanical foam 50 ltr |
| 118 | Fire Extinguisher (refill) 50 ltr |
| 119 | Oven Blower 1450 rpm |
| 120 | Twin Core 16 sqmm Cable (Copper) |
| 121 | ML2 Connector 415V 50Hz |
| 122 | DOL Starter 5 Kw |
| 123 | Oven Hot Plates 2Kw |
| 124 | MCCB 4 Pole 100 Amp. |
| 125 | MCCB 3 Pole 200 Amp. |
| 126 | MCCB 3 Pole 100 Amp. |
| 127 | MCCB 3 Pole 125 Amp. |
| 128 | Welding Set (Dry) |
| 129 | Heating Element for filter Plant 3Kw Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 No Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
