|
| 1 | Sub-Head : Concrete Work |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA)). |
| 5 | Sub-Head : Cladding Work |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | SH: - Steel work |
| 8 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Sub-Head : Flooring |
| 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 12 | SUB HEAD : 13.0 FINISHING |
| 13 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 14 | Old work (one or more coats) |
| 15 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 16 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 18 | Two or more coats on new work. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 20 | One or more coats on old work. |
| 21 | 12 mm cement plaster of mix : |
| 22 | 1:6 (1 cement: 6 fine sand) |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 24 | 1:6 (1 cement: 6 fine sand) |
| 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 26 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 27 | SUB HEAD : 15.0 DISMANTLING AND DEMOLISHING |
| 28 | Dismantling old plaster or skirting raking out joints and cleaning the urface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leadsincluding all lifts involved. |
| 30 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 31 | (a) In cement mortar |
| 32 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 33 | (a) 100 mm dia pipe |
| 34 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 35 | (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 36 | (b) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 37 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 38 | For thickness of tiles10 mm to 25 mm |
| 39 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixedglazing and false ceiling including disposal of unserviceable materialand stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge |
| 40 | Providing and fixing soil, waste and vent pipes : 100 mm dia. |
| 41 | (a) Sand cast iron S&S pipe as per IS: 1729. |
| 42 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : |
| 43 | (a) 100 mm dia pipe |
| 44 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
| 45 | For 100 mm dia. Pipe |
| 46 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia |
| 47 | Sand cast iron S&S as per IS - 1729 |
| 48 | Providing and fixing plain bend of required degree. 100 mm dia |
| 49 | Sand cast iron S&S as per IS - 1729 |
| 50 | Providing and fixing heel rest sanitary bend 100 mm dia |
| 51 | Sand cast iron S&S as per IS - 1729 |
| 52 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm |
| 53 | Sand cast iron S&S as per IS - 1729 |
| 54 | Providing and fixing single equal plain junction of required degree : 100x100x100 mm |
| 55 | Sand cast iron S&S as per IS - 1729 |
| 56 | Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets |
| 57 | (a) With 100 mm dia pipe |
| 58 | 114 mm off sets |
| 59 | (b) With 100 mm dia Pipe |
| 60 | 152 mm off sets |
| 61 | © With 100 mm dia Pipe |
| 62 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 100 mm |
| 63 | (a) Sand cast iron S&S as per IS - 1729 |
| 64 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 65 | 100 mm |
| 66 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter : |
| 67 | 100 mm |
| 68 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet |
| 69 | Sand Cast Iron S&S as per IS: 1729. |
| 70 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 71 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 72 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 73 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 74 | Orissa pattern W.C. pan of size 580x440 mm |
| 75 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 76 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 77 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 78 | White solid plastic seat with lid |
| 79 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 80 | (a) 32 mm dia |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 82 | (a) 20 mm nominal outer dia Pipes |
| 83 | © 32 mm nominal outer dia. Pipes. |
| 84 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 85 | (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 86 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 87 | (a) 20 mm nominal bore |
| 88 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 89 | © 25mm nominal bore. Weighing not less than 62 gms. |
| 90 | Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms |
| 91 | (a) 15mm nominal bore |
| 92 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 93 | 100 mm nominal dia. |
| 94 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 95 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type |
| 96 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 97 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 98 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 99 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 100 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 101 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 102 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 103 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 104 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 105 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 106 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 107 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 108 | 100x63x3.2 mm |
| 109 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 110 | 250x16 mm |
| 111 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 112 | 250x10 mm |
| 113 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 114 | Twin rubber stopper |
| 115 | Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) |
| 116 | 100x58x1.90 mm |
| 117 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 118 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 119 | W.C. pan with ISI marked white solid plastic seat and lid |
| 120 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab |
| 121 | 40 to 50 mm thick |
| 122 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 123 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 124 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 125 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 126 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 127 | For pipes 250 to 300 mm diameter |
| 128 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
| 129 | 200 mm diameter |
| 130 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : |
| 131 | 200 mm diameter S.W. pipe |
| 132 | Market Rate based Items |
| 133 | Providing and fixing CPVC Gate valve approved quality and manufacturer (astral or equivalent) on in pipe including cutting and fixing in pipe etc. complete (New work) : |
| 134 | a) 20 mm nominal outer dia Pipes |
| 135 | b) 25 mm nominal outer dia Pipes |
| 136 | c) 32 mm nominal outer dia Pipes |
| 137 | Making connection of CPVC distribution branch with CPVC main or with tank by providing tank nipples and other fittings complete as per the directions of Engineer-in-charge. a) 20mm dia nominalbore. |
| 138 | Providing and fixing Brass - Tee of approved brand and manufacture ( Astral or equivalent in pipe including cutting and fixing in pipe etc. complete (New work) : (A) 20 mm X 15 mm |
| 139 | Providing and fixing Brass FPT elbow 90 degree in pipe including cutting and fixing in pipe etc. complete (New work) : |
| 140 | a) 20 mm nominal outer |
| 141 | Credit for unserviceable material |
| 142 | (a) PVC material in the formof sanitary fiitings / installation |
| 143 | (b) Mild steel iron in the form of old windows /steel bars etc |
