|
| 1 | Dismentalling brick work or stone work in lime or cement mortar and including stacking of material as directed by E/I within a distance of 60 meter (200Feet) as per S.I. No. 692 |
| 2 | For Dewatering during Construction by 10 HP Dewatering pump. |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 4 | Plain/reinforced cement concrete in open foundation complete as per drawing and technical specification. As per MoRT&H S.I. No.-12.8 & Clause 1500,1700 & 2100 (M-15) A-40 |
| 5 | Plain/reinforced cement concrete in open foundation complete as per drawing and technical specification. As per MoRT&H S.I. No.-12.8 & Clause 1500,1700 & 2100 (M-15) A-20 |
| 6 | Plain/reinforced cement concrete in open foundation complete as per drawing and technical specification. As per MoRT&H S.I. No.-12.08 & Clause 1500,1700 & 2100 (M-25) |
| 7 | Plain/reinforced cement concrete in open foundation complete as per drawing and technical specification. As per MoRT&H S.I. No.-12.8 & Clause 1500,1700 & 2100 (M-30) |
| 8 | Plain/reinforced cement concrete in sub structure concrete as per drawing and technical specification. As per MoRT&H S.I. No.-13.5 (F) & Clause 1500,1700 & 2200 (M-30) |
| 9 | Providing concrete for plain/reinforced concrete complete in super structure as per drawing and technical specification. As per MoRT&H S.I. No.-14.1 (B) & Clause 1500,1600 & 1700 (M-30) |
| 10 | Providing and Laying cement concrete wearing coat M-35 Grade including reinforcement complete as per drawing and technical specification. |
| 11 | Supplying, fitting & placing HYSD bar reinforcement in foundation complete as per drawing & technical specifications. As per MoRT&H S.I. No.-12.4 & Clause 1600 |
| 12 | Supplying, fitting & placing HYSD bar reinforcement in sub structure complete as per drawing & technical specifications. As per MoRT&H S.I. No.-13.6 & Clause 1600 & 2200 |
| 13 | Supplying, fitting & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications. As per MoRT&H S.I. No.-14.2 & Clause 1600 |
| 14 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification |
| 15 | Providing and laying of Filter media with granular material/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. |
| 16 | Providing Weapholes in brick masonry/ stone masonry,plain/ Reinforced abutment, wing wall, returning wall with 100 mm dia AC pipe extending through the full width of the Sturcture with slope of 1(v):2(H) towards drawing face Complete as per drawing and technical Specification Clause 614,709,1204.3.7 |
| 17 | Provinding and laying boulders on river bed for protection against scour with sone boulders weighing not less than 40 kg each complete as per drawing and technical specifications. |
| 18 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement. |
| 19 | Construction of granular sub-base by providing compected well graded material, spreading in uniform layer with motor grader/tractor mounted appropriate equipment on prepared sruface, mixing by mix in place method with rortavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per Technical specification clause 401. |
| 20 | Providing and laying G-2 i/c spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushible screening to fill up the interstices of coarse aggregate, watering and compacting, to the required density grading - 2 as per technical specification clause 405 |
| 21 | Providing and laying G-3 i/c spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushible screening to fill up the interstices of coarse aggregate, watering and compacting, to the required density grading - 3 as per technical specification clause 405 |
| 22 | Brick edging on both side of the road 7.50 cm wide with M-150 class bricks laid on edge with mud mortar including cost of bricks,dressing and ramming the excavated earth in proper slope, all labour, T&P etc for proper completion of the work as per direction of Engineer-in-Charge. |
| 23 | Providing and applying primer coat with Bitumen Emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 24 | Providing and applying Tack coat with VG-10 Grade using bitumen pressure dristibutor at the rate of 0.30 Kg per Sqm on the prepared granular surface treated with primer and cleaned with hydraulic broom as per technical specification clause 503 |
| 25 | Providing, laying and rolling open-graded premix carpet of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregate using VG-10 grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base by manual means , including mixing in a suitable mixol, laying and rolling with a three wheel 80-100 Kn Static roller capacity, finised to required level and grades to be followed by seal coat as per Technical Specification Clause 508. |
| 26 | Providing and laying of seal coat by mechanical means with VG-10 Bulk bitumen sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C as per Technical Specification Clause 510. |
| 27 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 28 | Supply of hume pipe with coller (900 mm dia) |
| 29 | Laying of hume pipe and fixing with coller in 1:2 cement and fine sand mortar complete job. |
| 30 | Providing & Fixing Km. Hm. Stones, Sign Boards & Caution Boards etc. |
| 31 | Informatory / Cautionary Sign Board Please Enable Macros to View BoQ information |
