|
| 1 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 2 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. As per MORTH Sr.No. 13.10 and 710.1.4.of IRC:78 and 2200 Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 3 | Plain cement concrete in open foundation complete and as per drawing technical specifications. (M- 15) As per MORTH Sr.No. 12.8 and Specification No. 1500, 1700 Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 4 | RCC Grade M25 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 5 | Supplying, fitting and placing HYSD reinforcement complete in sub-structure drawing as per and Technical Specification As per MORTH Sr.No. 12.40 and Specification No. 1600 Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 6 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing clause 2706 & 2200 Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 7 | Providing and laying Pitching on slopes laid including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. As per MORTH Sr.No. 15.4 and Specification No. 2504 Including All material T&P, Labour cess etc But Excluding cost of GST (Part-A Box Culvert) |
| 8 | Construction of Embankment with Material Obtained from R.O.W. Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 & Diversion Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) |
| 9 | Providing, laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) |
| 10 | Providing, laying and spreading Material on a prepared sub base, cement @ 4% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. (Part B+C Approach & Addi. Approach) |
| 11 | Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surface cleaned with mechanical broom. Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) |
| 12 | Providing, laying and rolling of Open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using penetration grade bitumen the required line grade and level to serve as wearing course on a previously prepared base. including mixing in a suitable plant , laying and rolling with a smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.. Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) |
| 13 | Providing, and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonne/hours using crushed stone chipping 2.36 mm. Size and penetration bitumen of suitable grade.levels,grade and cross fall using type B seal coats. Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) |
| 14 | Construction of Subgrade and earthen shoulders with approved material obtained from R.O.W. with all lift and leads, transporting to site, spresding grading to reqiire slope and compacted to meet requirement of Tables 300.2 as per Technical Specification Clause 303.1 in Patri Including All material T&P, Labour cess etc But Excluding cost of GST (Part B+C Approach & Addi. Approach) Please Enable Macros to View BoQ information |
