|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. As per DSR 2023 SI No. 15.7.3 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 2 | Construction of embankment with approved material obtained from borrow pits with 1 km. lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of 95% of proctor density as per S.I. No 305(3.16) (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 3 | Construction of granular sub-base by providing close graded material , spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavator at OMC , and compacting with vibratory rollar to achieve the desired density , complete as per clause 401 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 4 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with Approved Material. Specification N. 304 (S.N. 12.01i) (Ordinary Soil) (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 5 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. SI. No. - 12.04 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 6 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC M-30) SI.No.12.08 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 7 | Supplying, fitting and placing HYSD bar reinforcement in foundation comlete as per drawing and technical specifications (Foundations) SI.No.12.42 (1600) (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 8 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification. SI. No. 13.08 |
| 9 | Providing and laying Cement concrete wearing coat M-35 grade including reinforecement complete as per drawing and Technical Specifications SI. No-14.4 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 10 | Providing, laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread Material Manually mixing in place with rotavator and compacting with the road roller and OMC to achieve the desired uncomfined compressive strength and to form a layer of sub-base. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 11 | Providing, laying and spreading Material on a prepared sub base, cement @ 4% by weight to the spread Material Manually mixing in place with rotavator and compacting with the road roller and OMC to achieve the desired uncomfined compressive strength and to form a layer of sub-base/base. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 12 | Providing and applying tack coat with bitumen VG-10 pressure distributor at the rate of 0.30 kg. Per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per Technical Specification Clasue 503. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 13 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm & 5.6 mm. aggregates either using penetration grade bitumen or emulsion to required line. Grade and level to serve as wearing coarse on a perviously prepared base, including mixing in suitable plant , laying and rolling with a three wheeled 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clasue 508.(Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 14 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat as per Technical Spefification Clause -510. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) |
| 15 | Stone Boulders pitching in slopes including cost of Labour T&P etc, required proper completion of the work. SOR 15.1 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) Please Enable Macros to View BoQ information |
