Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep in Soft/loose soil for hard standing Stage all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in Soft and Loose Soil for foundation, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 3 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified & directed. |
| 4 | Removing surplus soil to a distance n exc 50m and making good surface at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L for hardcore of broken boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for RCC design mix M-30 using 20 mm graded stone aggregatefor foundation including raft footing Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs, under-reamed piles and mass concrete etc., complete all as specified and directed. |
| 7 | M&L for RCC design mix M-30 using 20 mm graded stone aggregate for column, pillars, piers, post and struts etc., complete all as specified and directed. |
| 8 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on Flat rough finished surfaces of concrete. |
| 9 | M&L for formwork for Flat fair surfaces of finished concreteto sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, also splays between floors and beams, etc. complete all as specified and directed. |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions on square, rectangular or polygonal rough finished surfaces of concrete |
| 11 | M&L for TMT steel reinforcement round bars (CRS/HCRM/CRM), 10 mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hoops/stirrups for columns, hooks, placing in position and binding with and including annealed mild steel binding wire not less than 0.90 mm dia, complete all as specified and directed. |
| 12 | All as per item No.11 above but 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders |
| 13 | M&L for providing precast cement concrete solid building blocks masonry exc 10cm width, 1:3:6 type C-1, using 20mm graded stone aggregate set in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick plaster in CM 1:4 in two coats (10mm thick backing coat+5mm thick finishing coat) on concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. Note:(i). Water Proofing Compound as applicabe, shall be used at 1% of weight of cement or as per manufacturer\"s instructions, whichever is higher. (ii) WPC shall be measured and paid seperately under relevant item of schedule. |
| 15 | M&L for rendering 10mm thick plaster in CM 1:6surfaces of wallsfinished even and smoothwithout using extra cementcomplete all as specified and directed. |
| 16 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 17 | M&L for providing cement concrete, 75mm thick, 1:4:8type, D-2, using 40mm graded stone aggregate as in sub base or sub floor etc. complete all as specified and directed. |
| 18 | M&L for preparation of new surfaces and applying two or more coats of 100% premium acrylic exterior emulsion paint, VOC less than 50 g/litre, UV resistant, conforming to IS 15489:2004, with alkali resistance, anti-fungal and dirt resistance, Company Depot Tinted, with silicon additives, of approved shade, applied @ 1.43 litre per 10 Sqm per coat, over and including one coat of exterior primer on new surfaces applied @ 0.90 litre per 10 Sqm, complete all as specified and as directed. |
| 19 | M&L for applying 3 mm thick wall care putty on old plastered surfaces of wall including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applyingtwo coats ofdistemperetc complete all as specified and directed. |
| 20 | M&L for steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed. |
| 21 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard brass barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed. |
| 24 | S&F Steel locking bolts with mild steel electro-galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. |
| 25 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed. |
| 26 | S&F 110mm dia PVC (SWR) bends all as specified and directed. |
| 27 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 28 | M&L for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminium angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminium main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed |
| 29 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed |
| 30 | M&L for 10mm thk PVC insulation panels with EPS stuck to 1mm plain PVC sheetsuitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification etc complete all as specified and directed |
| 31 | M&L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, as in floors etclaid over and including 15mm thick screed bed in CM 1:4and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | M&L for Glazed ceramic Coloured tiles in vertical surface such as skirting, dado and rises to steps etc. 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in CM 1:3 set andset and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed. |
| 33 | M&L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polis |
| 34 | M&L for 10 mm thick cement plaster 1:3 as backing coat for dado / skirting complete. |
| 35 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 36 | M&L for 600x450 mm bevelled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building boardfixed to wall by wooden plug with chromium plated brass screw and cup washer fixed as in repair complete all as specified and directed. |
| 37 | M&L for Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed. |
| 38 | M&L for fancy type pillar taps cast copper alloy withcapstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwedshanks and fly nuts screwed for 15 mm bore of pipe MAKE: Hindware Cat. No.: F570023 Sink Cock With Normal Swivel Spout-Wall Mounted or equivalent |
| 39 | S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed. |
| 40 | S&F 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all asspecified and directed. |
| 41 | S&F in repairs vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outletetc complete all as specified and directed. |
| 42 | S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule andfixed in repairs complete all as specified. |
| 43 | S&F bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm borecomplete all as specified and directed. |
| 44 | S&F 75 mm dia PVC (SWR)floor trap with grating including jointing with solvent cement complete all as specified and directed by Engineer - in Charge. |
| 45 | M&L for PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall75 mm bore etc complete all as specified and directed. |
| 46 | S&F for vitreous china wash down water closet (pedestal pattern) white,including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. Note : Quoted rate shall excludes the cost of flush pipe, cistern & seat cover and the same shall be paid separately under respective item. |
| 47 | S&F seat cover for pedestal pan with plastic water closet seat , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 48 | S&F 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 49 | S&F providing 15mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 50 | S&F brass Chromium Plated Health faucet with spring pipe and required nipple all as specified and directed. |
| 51 | S&F two way bib cock with two lever and wall flange chromium plated brass of approved make, screwed for iron pipe 15mm bore complete all as specified and directed |
| 52 | S&F 80mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15mm bore GI pipe all as specified and as directed. |
| 53 | S&F brass chromium plated mixer for mixing hot & cold water screwed down for 15mm dia iron pipe of complete all as specified and directed. |
| 54 | S&F Rotational moulded PVC, double layered, water storage tanks of capacity 2000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified. |
| 55 | S&F 25mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes includingnecessary GI fittings complete all as specified. |
| 56 | S&F 25mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed. |
| 57 | S&F 15mm dia UPVC pipes of pressure rating 10 Kgf/cm2fixed to walls, ceiling or in floors etc complete all as specified and directed. |
| 58 | S&F stop valves/angle valve, cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed |
| 59 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specifiedand directed. |
| 60 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 61 | S&F 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed. |
| 62 | S&F 100 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed. |
| 63 | S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 64 | S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 65 | Demolition and breaking up drain pipes 100 mm dia (Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and directed. |
| 66 | All as per item No.65.00 above but 150 mm dia complete all as specified and directed. |
| 67 | M&L for Salt Glazed Stoneware pipes grade \"A\", 100mm bore, laid in trenches and jointed all as specified and directed. |
| 68 | M&L for Reinforced concrete pipes, class NP-2, laid and jointed complete with collars laid in trenches and jointed all as specified and directed. |
| 69 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for bed to drain pipe 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 70 | All as per item No. 69.00 herein before but bed to 200 mm bore. |
| 71 | S&F cast iron soil, waste and vent spun pipes 100 mm dia, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 72 | S&F in repairs Cast iron work grade FG 150, articles exc 5 kg eachunmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed. |
| 73 | M&L for flat iron for surrounding of cover slab for manholes etc and similar work conforming to Fe 290gde E 165 complete all as specified and directed. |
| 74 | S&F in repairs towel rail 600 mm long brass Chromium plated20mm dia all as specified and directed. |
| 75 | S&F brackets for 20mm dia CP towel rail |
| 76 | S&F in repairs brass Chromium plated towel ring round 150mm dia all as specified and directed. |
| 77 | Dismantling of galvalume aluminium zinc coating GI based plain or corrugated steel sheets of any thickness in roofing all as specified and directed. |
| 78 | S&F 2mm thk Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts and washer in roof, wall and including scaffolding upto any height etc., complete all as specified and directed. |
| 79 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching/drilling out existing glazing pins/spring clips, removing all debris, and providing and fixing new glazing pins/spring clips as required, complete all as specified and as directed. |
| 80 | Dismantling windows with frame of wrought iron or mild steel work of any description complete all as specified and directed. |
| 81 | M&L for aluminium powder coated (minimum thickness of powder coated 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 82 | M&L for aluminium powder coated (minimum thickness of powder coated 50 micron) window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc complete all as specified and directed. |
| 83 | M&L for 5mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed. |
| 84 | M&L for Aluminium grills of DG 104(10mm) powder coated of make Decogrill or equivalent including dismantling of old unserviceable aluminium grill all as specified and directed |
| 85 | Taking down cement or cement lime plaster, near cracks any description plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. |
| 86 | M&L for cutting out cracks to V-section in existing wall/ roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) all as specified and directed. |
| 87 | Supply only Integral water proofing compound complete all as specified and directed. |
| 88 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of block masonry or concrete surfaces finished even an smooth without using extra cement all as specified and directed. |
| 89 | Demolition and breaking up of drain pipes 200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed. |
| 90 | Demolition of plinth protection cement concrete floor in and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 91 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundations, etc., and getting out in hard/dense soil, complete all as specified and directed. |
| 92 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed. |
| 93 | M&L for 100mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as plinth protection and finishing the concrete surface even and smooth without using extra cementall as specified and directed. |
| 94 | M&L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width made of 1:2:4 type-B-1 using 20mm graded stone aggregate and setting in mortar, complete all as specified and directed. |
| 95 | Hand packing with broken stone, laid and packed 100 mm thick at back of walls/over arches etc., including raising or lowering to the required level, wedging/ramming to a firm bedding, and dressing to a uniform surface, complete all as specified and as directed. |
| 96 | Well ramming of broken stone (100 mm gauge) laid in a layer 100 mm thick, including spreading, levelling and watering as required, and ramming/compacting to a firm and even surface, complete all as specified and as directed. |
| 97 | M&L for 75mm thick sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 98 | M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as plinth protection and finishing the concrete surface even and smooth without using extra cement all as specified and directed. |
| 99 | M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of ceiling including preparation of old surfaces including necessary scaffolding and safety measures as requiredall as specified and directed. |
| 100 | M&L for preparing of old painted plastered surface of walls/ceiling of any description including cornices and applying one coat of acrylic emulsion exterior grade, weather proof antifungal paint including necessary scaffolding and safety measures as requiredcomplete all as specified and directed. |
| 101 | Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 102 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in hard / dense soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and directed. |
| 103 | M/L for PCC 1:4:8, type-D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 104 | S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates confirming to Fe-410-w or E-250 quality A complete all as specified and directed. |
| 105 | S&F Joist, channel, angle, or tee sections in vertical posts, fixed independently, with/without connecting plates, etc. confirming to Fe-410-w or E-250 quality A complete all as specified and directed. |
| 106 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed. |
| 107 | M&L for providing Cement concrete of 100mm thickness, type B-1, 1:2:4 (using 20mm graded aggregate) laid in flooring ( if requiredlaid in alternate panels) including finishing the surface even and smooth without using extra cement etc complete all as specified and directed. |
| 108 | M&L for point wiring (concealed) complete with and including 1.5 sqmm (nominal area) single core multi-stranded copper conductor, PVC insulated, unsheathed, FRLS, 1100 Volts grade cable drawn in and including concealed PVC conduit of suitable dia, including chasing/sinking in wall/ceiling and making good, complete with all necessary conduit accessories such as tees, bends, elbows, sockets, junctions, saddles/clamps, etc. and including 1.5 sqmm (nominal area) PVC insulated, unsheathed, FRLS, 1100 Volts grade copper conductor as continuous earth wire. The work shall further include modular flush box of suitable size with modular cover plate, including provision for housing switches/sockets/regulators, etc., and making good disturbed surfaces to match existing finish using cement mortar (1:4) and touch-up/painting to match existing surfaces, complete, all as specified and as directed, for the following: |
| 109 | (a) One light point controlled by one switch |
| 110 | (b) One Fan point controlled by one switch |
| 111 | (c) One 5 pin 6 Amps socket outlet on independent board. |
| 112 | (d) One 5 pin 6 Amps socket outlet on same board. |
| 113 | All as per item No 108.00 here-in-before but wiring with 2.5 sqmm size copper conductor and 2.5 sqmm cable as earth wire for 16 Amps power point on independent board . |
| 114 | S&F switch piano 5 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed. |
| 115 | S&F socket outlet 2 in 1, 3 pin, 5 Amps flush type, complete all as specified and directed. |
| 116 | S&F switch socket combination 3 pin, 16 Amp, flush type universalcomplete all as specified and directed. |
| 117 | S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 118 | S&F surface/wall-mounted LED batten with aluminium housing and integral electronic driver, 10 W, 140–260 V AC, system lumen output 1000–1200 lm, CCT 5700–6500 K, PF > 0.95, CRI ≥ 70, THD ≤ 10%, with minimum in-built surge protection 2.5 kV, decorative type, complete all as specified and directed. Make: Havells Cat. Part No. LUMILINE PLUSEPRO BS 10W LED865SPCSSIND or equivalent. |
| 119 | S&F surface/wall-mounted Regal batten including suitable 20 W LED tube (4 ft), complete all as specified and directed. Make: Cat. Part No.: REGALBATTEN8UPTO1X22WDSBSWH and PHOTONULTRAE2.01213T8SSTL20WLED865SPC or equivalent. |
| 120 | S&F exhaust fan, steel body, AC single-phase 230 V, 300 mm sweep, 2100 RPM, air delivery 600 CMH, power rating 52 W, noise level 45 dB, with frame and back louvers, complete all as specified and directed. Make: Cat No: SKU 70001 of Bajaj/CG/Orient or equivalent. |
| 121 | S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 122 | Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty aluminium conductor power cable 1100 V grade of size 2-core 10 sqmm, complete all as specified and directed. |
| 123 | Supply & fixing in repair of sheet metal enclosure MCB DB SPN 08 ways double door type with bus bar all asspecified and directed . |
| 124 | Supply and fix 240 V, 10 kA ‘C’ curve MCB SPN 32 A, including connections, testing and commissioning, complete all as specified and directed. |
| 125 | M&L for sub-main wiring with two runs of 2.5 sqmm multistranded copper conductor PVC insulated FRLS cable 1100 V, drawn through 25 mm dia PVC conduit with accessories, concealed on wall/ceiling, and one run of 2.5 sqmm FRLS green PVC insulated copper earth continuity conductor, complete all as specified and directed.Note: (i) Phase shall be of Red/ Yellow/ Blue, neutral shall be of black and earthing wire shall be of green colour as per standards (ii) Two runs of cable for phase/ neutral and one run of cable for earth shall be measured and paid as one unit length. |
| 126 | Supply and fixing of Electric Storage water heater of capacity 25 Ltrs of Five star rating, AC 230 Volts with four numbers nut bolts duly grouted in walls including all standard accessories with flexi connection pipe of 450mm size, glass line tank, NRV complete allas specified and directed |
| 127 | M&L for PVC connection pipe (copper) 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete as all specified and directed. |
| 128 | Supply and fix 240 V, 10 kA ‘C’ curve MCB SP 6–32 A, including connections, testing and commissioning, complete all as specified and directed. |
| 129 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 130 | M&L for point wiring (concealed) complete using approved colour coding as per IS (Red/Black/Green for single phase circuits) with 1.5 sqmm (nominal area) single core multi-stranded copper conductor, PVC insulated, unsheathed, FRLS, 1100 Volts grade, ISI marked to IS:694 with valid CML No., drawn in and including medium grade PVC conduit, minimum 20 mm dia, concealed in wall/floor/ceiling, including all necessary conduit accessories such as tees, bends, junction boxes, inspection bends, couplers, saddles/clamps etc. The work shall also include mild steel/pressed steel flush (sunken) box with earth dolly, suitably treated and painted internally with two coats of anti-corrosive paint/aluminium paint over one coat of red oxide primer and externally with two coats of black bituminous paint over one coat of red oxide primer, complete with white modular cover plate with frame for mounting switches/sockets/fan regulators etc., including 1.5 sqmm (nominal area) PVC insulated, FRLS, 1100 Volts grade multi-stranded copper conductor as earth continuity conductor, connected to common earth and terminated complete, and including chasing/cutting/sinking, making good the disturbed surfaces with CM (1:4) and matching finish, complete, all as specified and as directed, for the following: |
| 131 | One light controlled by one switch 6 Amp one way |
| 132 | One Fan controlled by one switch 6 Amp one way |
| 133 | One socket outlet 3 pin 5 amps same board with other switches |
| 134 | One socket outlet 3 pin 5 Amps socket point on independent board |
| 135 | M&L for point wiring complete with two runs of single core 4.0 sqmm (nominal area) multi-stranded copper conductor, PVC insulated, 1100 Volts grade, drawn in and including rigid PVC conduit with conduit accessories, conforming to relevant IS specifications, concealed in walls/ceiling/trusses and fixed with suitable clamps, screws, saddles etc., including one run of single core 4.0 sqmm (nominal area) green colour PVC insulated multi-stranded copper conductor as earth continuity conductor, connected to common earth including 1.22 mm thick mild steel terminal box with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws, for mounting 15 Amps multi-purpose socket outlet on independent board, including all necessary connectors/termination, connecting up and testing, complete, all as specified and as directed |
| 136 | Supply & fix in repair energy saving ,environment friendly & robust medium/High bay 100 wattLED Luminaire with high efficiency with toughened glasswith impact and corrosion resistant including thermal management complete all as specified and directed. |
| 137 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 138 | S&F sheet metal enclosure MCB DB VTPN 08 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system complete all as specified and as directed. |
| 139 | S&F in repair for MCCB4 pole, 415 V of63 Amps current rating with breaking capacity 16 KA complete with connection testing and commissioning complete all asspecified and directed. |
| 140 | M&L in repair for sub main wiring withtwo runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.00 sqmm PVCinsulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified. (i) Each sub main wiring shall run in separate PVC conduit.(ii) PVC casing capping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/beam column/ceiling etc). The same shall be deemed to include in the quoted rate. No extra cost shall be paid for the PVC casing capping item. |
| 141 | All as per item No.132.00 but size of wire 6.00 Sqmm |
| 142 | M&L for point wiring for light/fan point complete with two runs of 1.5 sqmm (nominal area) single core PVC insulated, unsheathed, FRLS grade, multi-stranded copper conductor cable, 1100 Volts grade, conforming to IS 694 (Part II) and ISI marked, drawn through and including rigid non-metallic PVC conduit of suitable size on surface with all conduit accessories, including sunk pressed steel/cast iron terminal box of suitable size with 3 mm thick plastic laminated sheet top cover, fixed flush with wall surface with brass screws and sunk cup washers, for mounting switches / socket outlets / fan regulators, etc., including one run of 1.5 sqmm (nominal area) PVC insulated, unsheathed, FRLS grade, multi-stranded copper conductor as earth continuity conductor, connected to metallic bodies of luminaire/fan etc. at one end and to common earth dolly at the other end, including connecting up and testing, complete, all as specified and as directed. |
| 143 | Supply and fix integral sleek CRCA housing box type luminaire suitable for One T8 LED tube light with white acrylic cover suitable for upto 1X20 watt LED tube light |
| 144 | Supply and fix LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed.Make : BAJAJCat No. BLRB 20 CW LEDor equivalent make in Havells/Crompton Greaves |
| 145 | Supply and fixing sheet metal enclosureMCB DB SPN4 ways doubledoor type with suitable bus barcomplete all as specified and directed. |
| 146 | Supply & Laying includingjointing, testing and commissioning of 3 core 4 Sqmm XLPE insulated, armoured, heavy duty, LT UG electric cable with aluminium conductor 1100 volt grade including provision of lugs, gland etc laid in trenches or fixed on wall/Pole or drawn through GI pipe complete all as specified and directed. |
| 147 | Supply and fix rigid steel conduit of 32 mm dia excusive of boxes (junction/terminal) but inclusive of all tees, bends ,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 148 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core |
| 149 | M&L for natural dry river sand cushioning including spreading, levelling and hand punning to underground cable in trench all as specified and directed.Note : Punned thickness shall only be measured and paid. |
| 150 | M&L for cable protection with factory casted PCC cable cover class LV, type-I, flat size 250mm x 150mm x 40mmISI marked all as specified and directed. |
| 151 | Supply and lay GI tubing, \"light grade\" of size 80mm, with all fittings as in cable protection, laid in trenchesall as specified and directed . |
| 152 | S&F in repair for MCCB 4 pole, 415 V of 160 Amps current rating with breaking capacity 36 KA complete with connection testing and commissioning complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail