|
| 1 | M&L Cement concrete in sunken portion filling in mass concrete Type E2 1:5:10 (using 40mm graded aggregate) complete including demolition of PCC & tiles in sunken portion (unreinforced) of any description and in any position, complete all as specified and directed. |
| 2 | Material and labourfor coloured glazed ceramic tiles 450mm x 350 mmx 7 mm thickas in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding10mm thick rendering in CM (1:4) for fixing wall tiles after dismantling of oldwall tiles including cement mortar bedding and rubbish off the premises, complete all as specified and as directed. |
| 3 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 4 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 5 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in Skirting,Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including10 mm thick screed bed or bedding layer in CM (1:3) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 6 | Material and labour forVitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 7 | Material and labour forVitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Skirting,Dado etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including12 mm thick screed bed or bedding layer in CM (1:3) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 8 | Material and labour forVitrified tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishesafter dismantling of oldfloor tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 9 | Material and labour forVitrified tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Skirtings,dado etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including12 mm thick screed bed or bedding layer in CM (1:3) for lying floor finishesafter dismantling of old wall tiles incluidng cement mortar beddingand rubbish off the premises complete all as specified and as directed. |
| 10 | Materials and Labour for, Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete insteps, jambs, pillars, window-cills, cooking platforms and likefloors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 11 | Materials and Labour for, Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for wall lining (veneering towall) 12 mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 12 | M&L for treatment of capillary rising damp completely eradicated by introducing an effective i.e capillary sealing horizontal barrier across the masonry wall not exc 400mm thick by following method:(i) Drilling: Drilling of holes @ 100mm centre to centre in walls.(ii) Cleaning of all the drill holes with blower and brush.(iii) Fixing of nozzle 12mm dia by mechnically in wall.(iv) Application of I-CANNANO quick drying High strength Nano magic 1 Silicon micro emulsion concentrate diluting with 1:9 potable water.(v) Diluted Shorter Chain Bondcoat nano carbon based injecting under pressure with airless injection machine to all the drilled holes through 12mm nozzle.(vi) Concerated 100gm (Approx) of Shorter Chain Bondcoat nano carbon based should be injected in each holes.(vii) Leave it to minimum 48 hours time to complete the reaction ofShorter Chain Bondcoat nano carbon based. (vii) Filling of the drilled holes by injecting cement slurry with airless injection machine through 12mm nozzle.(ix) Removing the 12mm nozzles from the injected drill holes.(x) Painting work to disturbed portion to match the existing surface complete.Note:- (i) The above work shall be done by the authoriesd applicator only.(ii) All necessary scaffolding shall be deemed included in the quoted rate. |
| 13 | Materials and labour for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on wallsincluding taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats ofFinishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over alkali reistant primer over 2 mm thick wall care putty complete all as specified and directed. |
| 14 | Materials and labour for rendering 10 mm thick cement plaster, in cement mortar (1:6) on other than fair faces of brick work or concrete surface on wallsincluding taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of oil bound distemper over alkali resistant primer over 2 mm thick wall care putty, complete all as specified and directed. |
| 15 | M&L for Plastering in patches n exc 3.0 Sqm in each patch including taking down cement plaster on Ceiling surface, etc. including raking out joints, hacking for key, scrubbing down with water, Rendering 5mm thick with cement mortar 1:3 and applying two coats of White Washing including preparation, complete all as specified and directed. |
| 16 | M & L for prepration of old plastered or unplastered surfaces and applying one coat ofoil bound distemper, complete all as specified and directed. |
| 17 | M & L for complete removal of exisiting treatment, including preparation of plastered or unplastered surfaces of wall and applyingtwo coat oil bound distemper over a coat of primer and coat of wall care putty, complete all as specified and directed |
| 18 | M & L for preparation of old wooden surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint, complete all as specified and as directed. |
| 19 | M & L for preparation of old steelsurfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint, complete all as specified and directed. |
| 20 | M & Lfor prepration of old plastered or unplastered surfaces of and applying one coat ofwhite wash on ceiling, complete all as specified and directed. |
| 21 | M & L for prepration of old plastered or unplastered surfaces and applying one coat ofwhite wash on wall, complete all as specified and directed. |
| 22 | M & L for 3mm thick, sheet glass ordinaryquality,glazing with oil putty in square n exe 0.5 Sqm in each paneincluding hacking outold broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onesat any height in multy story bldgs (G+2), complete all as specified and as directed. |
| 23 | Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia ofwire and average width of aperture 1.40mm dia fixed with stainlesssteel wire staples or with wooden beading or any other fixing arrangements, complete all as specified and as directed. |
| 24 | S&F for toilet Roll Holder with Stainless steel flap complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 1153S or equivalent |
| 25 | S&F for Swivel Towel Holder Twin Type, Stainless Steel complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 115S or Equivalent |
| 26 | S&F for Automatic Soap dispenser of capacity 0.80 ltr complete all as specified and as directed. Make:Jaquar cat part no:SDR-BLC-DJ0160ASN or equivalent |
| 27 | S&F for Soap dish Holder complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 1131N or equivalent |
| 28 | S&F for Corner Glass Shelf (with bracket) complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 1173 or equivalent |
| 29 | S&F for Towel Rack 600 mm Long with lower hangers Stainless steel complete all as specified and as directed. Make: Jaquar cat part no:ACN CHR 1181S or equivalent |
| 30 | S&F for Hand Shower (health faucet) (ABS Body ) with 8 mm dia ,1 metre long spirochrome flex tube & wall hook complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 587 or equivalent |
| 31 | S&F for click clack waste 32 mm size full thread with 130 mm height complete all as specified and as directed. Make:Jaquar cat part no:ACN CHR 727L130 or equivalent |
| 32 | S&F for Flash touch-free infrared hand dryerwith 1150W rated power & carbon brushmotor 304 SS finish complete all as specified and as directed. Make:Jaquar cat part no:HDR-SSF-AK2807 or equivalent |
| 33 | S&F for Paper towel dispenser towels with C/Z folds -wall mounted capcity (400-600) c/z towels AISI SS Satin finish materialcomplete all as specified and as directed. Make:Jaquar cat part no:ACN CHR or equivalent |
| 34 | S&F for Curved shaped urinal partition with frosted glass of dimension 450 mm x 900 mmGlass:10mmFinish: Chrome complete all as specified and as directed. Make:Jaquar cat part no:JSE-CHR-110UC450X or equivalent |
| 35 | S&F for Urinal with Sensor Kit, Spreader and Fixing Accessories Set of dimension 360mm x 350mm x 710mm complete all as specified and as directed. Make:Jaquar cat part no:URS-WHT-13267S or equivalent |
| 36 | S&F for Single Piece Slim Concealed Cistern with Wall Mounting Frame,Installation Kit and “S-Type/P-type” DrainPipe Connection Set for Wall HungWC (with Control Plate Ornamix Prime Flush Control Plate) complete all as specified and as directed. Make:Jaquar cat part no:JCS-WHT-2400WS and JCP-CHR-102415 or equivalent. |
| 37 | S&F for Rimless Wall Hung WC with UF soft close seat cover, Hinges, Accessories Set, complete all as specified and as directed. Make:Jaquar cat part no:VGS-WHT-81953UF or equivalent |
| 38 | S&F for table top wash hand basin with Fixing Accessories of dimension 425mm x340mm x175mm complete all as specified and as directed. Make:Jaquar cat part no:CNS WHT -903 or equivalent. |
| 39 | S&F for Bottle Trap 32mm Size with 300mm & 190mmLong Wall Connection Pipes & Wall Flange complete all as specified and as directed. Make:Jaquar cat part no:ALD-CHR-769L300X190 or equivalent |
| 40 | S&F for 600mm Long connection pipe for WHB and EWC Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Tall Boy Basin Mixers complete all as specified and as directed. Make:Jaquar cat part no:ALD-CHR-801B or equivalent |
| 41 | S&F for Laguna Tall Boy Sensor Faucet for Wash Basinwith Pre-mixed Water Supply Kit with connected all accessories (battery operated) complete all specified and directed by engr-in-charge. Make: Jaquar cat part no:SNR CHR-91017PK or Equivalent |
| 42 | S&F for Overhead Shower 200X200mm Square ShapeSingle Flow (ABS Body Chrome Plated with GrayFace Plate) with Rubit Cleaning System complete all as specified and directed. Make:Jaquar cat part no:OHS 35497 or equivalent |
| 43 | S&F for three in one Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges with all connected accessories complete all as specified and directed. Make:Jaquar cat part No:COP-CHR-273PM or Equivalent |
| 44 | S&F of 2 in one Bib cock complete all as specified and directed. Make :Jaquar Cat part No:COP-CHR-041PM |
| 45 | S & Fin repair plastic water closet seat cover, white, closed pattern with flat bottom, and coverand mild steel chromium plated or aluminized hinging device complete all as specified and as directed. Make - Prayag- standard - 513,Hindware, Parryware, Cera and equivalent\" |
| 46 | S&F in repair Vitreous China Wash HandBasin, white, flat back, size 550x400mm with & including brackets, cutting for and pinning in ends of brackets or eracting stand & PVCwaste pipe 800mm long withCP coupling, CP Pillar Tap15mm, PVC connection 15mmx450mm long etc complete all as specified and directed. Make \" Prayag- MIDAS 4642, Hindware, Parryware, Cera and equivalent\" |
| 47 | S&F in repair vitreous china wash down water closet pan (EWC), (Pedestal Pattern) whitewith & including pvc white color Seat cover fixed with Mild Steel CPhinging device,complete all as specified and as directed. Make \"Prayag-Garnet-4018, Hindware Parryware, and equivalent |
| 48 | S & F in repair vitreous china squatting pan, ‘Orissa’ pattern\" size 580x440mm white, with integral foot rests (excluding flushing cistern) including provision ofPCC or lime concrete bedding, Vitreous china \"p\" trap and removal of debries complete all as specified and as directed. Make \"Prayag-4055, Hindware Parryware, and equivalent |
| 49 | S & F in repair bib tap 15mm PTMT with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make- Paryag Cat No 121-E, CERA, Parryware and equivalent |
| 50 | S & F in repair Pillar Tap 15mm PTMT, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make Prayag Cat No 130-E,CERA, Essco, Parryware and equivalent |
| 51 | S & F in repair Stop Cock (F/T) /Angle cock 15mm PTMTscrewed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make Prayag cat No 144, CERA, Essco, Parryware and equivalent. |
| 52 | S&F in repair Stainless steel grating 100mm dia with/without hole complete all as specified and directed. Make Prayag cat no FT-04, Hindware, Parryware and equivalent |
| 53 | S&F in repair Stainless steel grating 125mm dia with/without hole complete all as specified and directed. Make Prayag cat no FT-07, Hindware, parryware and equivalent |
| 54 | S & F 500 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC Float valve 20mm bore, Tank cover, wash outand overflow pipenecessary tank nipples, after disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, complete all as specified and as directed. |
| 55 | Taking down & refixing EWC Vitreous China after necessary repair work including connection to P/S trap, seat cover, flushing cistern, flush pipe etc complete. |
| 56 | Taking down & refixing WHB Vitreous China after necessary repair work including connection to taps waste fittings etc complete all as specified and as directed. |
| 57 | S&F mild steel framed work such as grills for existing Tank covers, grating, window grills, hold fasts etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-290 Gde -E-165 including taking down old one complete all as specified and directed. |
| 58 | S & F in repairS&F sinks made of stainless steel 1 mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm complete all as specified. Make Prayag-1239D or equivalent. |
| 59 | Taking down & refixing 10 Ltr Capcity PVC flushing cistern after necessary repair work including connection to IWC/EWC and pvc connection after replacment of PVC Flush pipe, complete all as specified and as directed. |
| 60 | S&F in repairPVC (SWR)floor trap 75 mm plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 61 | M&L for Rendering 10mm thick in CM 1:3 using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement and curved adqutely and after dryingapply two coats of epoxy resin of Fosroc or equivalent both on floor and walls of sunken poriton and tested, complete all as specified and directed. |
| 62 | Supply only ISI marked approved integral water proofing compound. |
| 63 | M&L for Plastering in patches n exc 3.0 Sqm in each patch including taking down cement plaster on walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, Rendering 10mm thick with cement mortar 1:4 and applying two coats of Oil bound distemper over a coat of primer including preparation of new surface, complete all as specified and directed. |
| 64 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) nexc 1.5 sqm each, complete all as directed. |
| 65 | Material and labour for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 66 | Material and labour for PCC(1:3:6) type C1 (using 20mm graded stone aggregate) for fixing hold fast and backfilling in MS chowkhat, complete all as specified and as directed. |
| 67 | S & Fin repair factory made steel windows with side hung shutters including projectingtype hinges with mild steel handle, and steel peg stay complete without glazing bars dovetailed or weldedand making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. |
| 68 | S & F in repair factory made steel windows with side hung shutters including projectingtype hinges with mild steel handle, and steel peg stay complete with glazing bars dovetailed or weldedand making goodthe disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. ` |
| 69 | S & F in repair aluminium window shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21100mm long (2 No.) suitable handle (1 No.), complete all as specified and directed. |
| 70 | S & F in repair aluminiumventilator shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No.) suitable handle (1 No.), complete all as specified and directed. |
| 71 | S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , completeall as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, 5.5 mm thick tinted glass / preleminated particle board (Novapan) panel, handleetc complete all as specified and directed including taking down old one. |
| 72 | M & L for4 mm sheetglasse ordinary quality, in squares exc 0.5 sqm each pane for windows including necessary arrangements to fix the same in multy storey bldgs up to G+2 complete all as specified and as directed. |
| 73 | Supply and fix4.8mm thick, tinted sheet glass ordinaryquality,and door and windows ventilator etc with rubber packing in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size from aluminium beading ) complete all as specified and directed. |
| 74 | Supply and fix4.8mm thick, tinted sheet glass ordinaryquality,and door and windowsetc with rubber packing in squareexc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size from aluminium beading ) complete all as specified and directed. |
| 75 | Supply and fix Factory made Pressed door steel frames 1.25mm thick(105x60mm wide ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 76 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thickcomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge |
| 77 | S&F 100 mm Stainless steel hinges for PVC doors complete all as specified and as directed. |
| 78 | S & F 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 79 | S & F 100mm long aluminium anodised handles, cast type, anodised complete all as specified and as directed. |
| 80 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean radius with old size bricks locally available built in cement mortar 1:4as in Manhole etc complete including demolition of old brick work built in cement mortar complete. |
| 81 | M & L for rendering 10 mm thick on fair faces of brick work in CM 1:4 by as per manufacture instruction by weight of cement finishing the surfaces even and smooth with out using extra cement (WPC will be paid seprately), complete all as specified and directed. |
| 82 | M & L for rendering 15 mm thick on other than fair faces of brick work in CM 1:6 finishing the surface fair and even even and smooth with out using extra cement complete all as specified and directed. |
| 83 | M&L for Precast reinforced cement concrete in slabs for WHB and Connected Works type B1(1:2:4)set in CM 1:4 using 20 mm Graded stone aggregateincluding necessary form work and demolition of RCC of any description and in any position complete. (reinforcement shall be measured and paid separately) |
| 84 | M&L for TMT bars 10 mm dia and over upto and including 10 mm dia cut to length bent to shape as required incl cranking and binding with and incl MS wire (anealed) not less than 0.90 mm dia as in reinforcement complete all as specified and directed. |
| 85 | S&F for full view 5-6 mm thick bevelled edge mirror of selected quality glass, mounted on stainless steel wall touch holding brackets with stainless steel screws fixed to plstic plugs with cup washers complete all specified and directed. |
| 86 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
