|
| 1 | Surface excavation n.exc 30 cm deep and avaraging 15cm deep and getting out in soft /loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and 1.5m deep for foundation etc in any type of soil and getting out complete all as specified and as directed. |
| 3 | M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and as directed. |
| 4 | M&L Brick work with sub class \"B\" ,old size brickstraight or curved on plan exceeding 6m mean radius built in CM 1:6complete all as specified and as directed. |
| 5 | M&L Brick work with sub class \"B\" ,old size brickstraight or curved on plan exceeding 6m mean radius built in CM 1:4complete all as specified and as directed. |
| 6 | M&L brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed. |
| 7 | 15mm thick rendering on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cementincluding necessary scaffolding or Jhula complete all as specified and directed. |
| 8 | 15mm thick rendering on brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cementincluding necessary scaffolding or Jhula complete all as specified and directed. |
| 9 | 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement |
| 10 | Supply only integral water proofing compound. |
| 11 | M&L white washing two coats to ceiling surfaces including preparation of newly plastered untreated surfaces all as spd and directed |
| 12 | M & L applying two coats of cement based paint on newly plastered orer a coat of primmer unplastered wall surface including preparation ofsurfaces, complete all as specified. |
| 13 | M&L white washing two coats to wall surfaces including preparation of newly plastered untreated surfaces complete all as specified and as directed. |
| 14 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of anti termite emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed. |
| 15 | M&L for Treating the top surface of field earth at the rate of 5 litres of anti termite emlusion per sqm of surface area complete all as specified and as directed. |
| 16 | M&L for Treating the soil under plinth protection at the rate of 5 litres of anti termite emlusion per sqm of surface area complete all as specified and as directed. |
| 17 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 18 | RCC 1:1.5:3 type A-1using 20mm gradedcrushed stone aggregate as in RCCslabs shelves roof projections, drops, chajjas etc complete all as specified and as directed. |
| 19 | All as per serial item no 18.00 here in before but in beams, cantilevers, coloum, lintels over 1.50m span complete all as specified and as directed. |
| 20 | Providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate as in lintels up to 1.50 mtr clean span, cills siesmic and other similar bands, plinth courses, coping, bed plates and the like including weathering slightly rounded or chemfered angles and throating complete all as specified and as directed. |
| 21 | Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 22 | Mild steel TMT bars 8mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 23 | All as per serial item no 22.00 here in before but 6mm dia and over upto and including 8mm dia in stirrups, spaces and binders complete all as specified and as directed.. |
| 24 | Use and waste of form work to soffits of suspended slabs such as roof slab, floor slab and similar work n.exc 200mm thick with rough finished flat surfaces complete all as specified and as directed. |
| 25 | Use and waste of form work to roofs, chhajjas, trough and similar items including edges with rough finished flat surfaces of concrete complete all as specified and as directed. |
| 26 | Use and waste of form work to sides and soffits of floor or roof beams haunching, lintels, coloum, cantilever shelves including supported over hangs etc. with rough finished flat surfaces of concrete complete all as specified and as directed. |
| 27 | S & F steel window/ Ventilators with side hung shutters including boxtype hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 28 | All as per item no 27.00 here in before but without glazing bars. |
| 29 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290. Gde-E-165 complete all as specified and as directed. |
| 30 | M & Lfor colour glazed ceremic colouredtiles invertical surface 300 x 600 x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and as directed. |
| 31 | Non skid ceramic coloured tiles 7 mm to 8mm thick (square /rectangular )area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 32 | S&F coloured granite (of any type) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing after roughing to surfaces over and including screed bed of 10mm thick of cement mortar 1:3 complete all as specified and directed. |
| 33 | Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- |
| 34 | (a) Prepartionof RCCfoof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaningsurface, all as per manufacturer\"s specificationcomplete all as specifiedand directed. |
| 35 | (b)Supply & providing waterproofing treatment with polymeric proofingmembrane of 3 Kg/SqmHYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specifiedor as directed. |
| 36 | (c) M & L for solar reflective bitumens aluminium paint @ 0.10 Kg per Sqm over membrance surfaces as in roof treatment complete all as specified and directed. |
| 37 | M&L providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge |
| 38 | M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 Nos PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing |
| 39 | S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm |
| 40 | 100mm size stainless steel butt hinges complete all as specified and as directed. |
| 41 | 150mm length extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 42 | 150mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 43 | S&F sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc complete all as specified and as directed. |
| 44 | M&L 75mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggegate) as in plinth protection finished even and smooth without using extra cement ( laid in alternate bays) complete all as specified and as directed. |
| 45 | M&L for salt-glazed stoneware gully traps,150mmx150mm square or round mouthed, type \"P\" complete all as specified and as directed. |
| 46 | Returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete all as specified and as directed. |
| 47 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 150mm dia complete all as specified and as directed. |
| 48 | Removing excavated soils n.exc 50mtrs and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed. |
| 49 | S&F Rotational moulded polythene water storage tanks white colour ( cylendrical vertical with closet top) hoisted and fixed in position all as spd in SSR Part-I 1000 ltr capacity complete all as specified and as directed. |
| 50 | 20 mm bore diagalavanised iron tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floor or trenchs etc complete all as specified and as directed. |
| 51 | 15 mm bore diagalavanised iron tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floor or trenchs etc complete all as specified and as directed. |
| 52 | Stop valves cast copper (CP) alloy, screwed down high pressure with crutch or butterfly handle scrwed both ends for iron pipes or for unions and fixed bore pipe 20mm complete all as specified and as directed. |
| 53 | All as per serial item no 52.00 here in before but bore of pipe 15mm complete all as specified and as directed. |
| 54 | S&F fancy type chromium plated angle valve with flange 15mm size complete all as specified and as directed. |
| 55 | Bib tap long nose with flange cast copper alloy chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed (15mm size) |
| 56 | S&F in repairs chromium plated fancy type concealed stop cockfor 15 mm bore pipe complete all as specified and directed. |
| 57 | Supply & fixing vitreous china wash down water closet pan pedestal pattern white /coloured including CP EWC Jet with seat cover complete and taking down oldseat fixing bolt flush pipe complete all as specified and as directed. |
| 58 | S&F vitreous china orissa pattern, size 580x440mm white with integral foot rests and \"P\" or \"S\" trap, connection to trap andto flushing pipe front or back inlet, including lime concrete bedding, trap complete all as specified and as directed.(excluding flushing cistern and flush pipe). |
| 59 | S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 60 | S&Fin repairs 6 x 6 inches ultra slim shower head with 12 inchesarm of Chromium plated brassfor fixing 15 mm pipewith bend of 45 degree with flange complete all as specified and directed. |
| 61 | S&F for 6mm thick looking mirror fixed on 12mm thick marine plywood with powercoated aluminium frame alround the mirror including mounted on wall size 1.50 x 0.60 complete all as specified and directed. |
| 62 | S & F urinal valve auto closing system with built in control cock & wallflange valve 15 mm bore including urinal sperader of CPcomplete all as specified and directed. |
| 63 | S & F vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe complete all as specified and as directed. |
| 64 | M&L forMarble works 16 to 18mm thick Green marble machine cut and machine polished,and moulding, one side green marble,over/jambs of doors/ window cills,and urinal partition wash basin platforms andflooring,skirting/dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble complete all as specified and as directed. |
| 65 | S&F fancy type viteous china counter top, wash hand basin, \"OVAL\" shaped,white of size 550x400mm including bottle trapsand piller cock with green marble inserted in 18 mm thick mounted green marble stone slab platform by cutting on oval shaped etccompleted all as specified and directed .(Green marble cutting shall be measured and paid separately) Make cera,parryware |
| 66 | Extra over for cutting and moulding of greenmarble in oval shaped to accommodate WHB of size 550x400mm complete all as specified and as directed. |
| 67 | S&F Brass CP pillar cock fancy type for iron pipe and fixed bore of pipe 15mm complete all as specified and as directed. |
| 68 | S&F PVC (SWR) pipes single socketd in any length with rubber ring joints laid in trenches or in floor 110mm bore or fixed to walls complete all as specified and as directed. |
| 69 | S&F PVC (SWR) pipes single socketd in any length with rubber ring joints laid in trenches or in floor 75mm bore or fixed to walls complete all as specified and as directed. |
| 70 | PVC (SWR) bends any radius 75mm bore. |
| 71 | PVC (SWR) bends any radius 110mm bore. |
| 72 | PVC (SWR) junction single or double equal or unequal 75mm bore. |
| 73 | PVC (SWR) junction single or double equal or unequal 110mm bore. |
| 74 | PVC (SWR) vent cowl 75mm complete all as specified and as directed. |
| 75 | M&L PVC (SWR) floor trap plain with grating including jointing with solvent 75mm dia. |
| 76 | PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm dia. |
| 77 | PVC (SWR) gully trap 125/100mm setting and jointing with solvent cement complete all as specified and as directed. |
| 78 | S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and as directed. |
| 79 | M&L for hard core of stone not exc 63 mm guage spread, levelled in layers not exc 100mm watering and well ramming to true surfaces complete. |
| 80 | M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 81 | M& L for 30X30cm providing precast cement concreterubber moulded chequeredcolouredtiles 25 mm thick even finished on topof approved design and pattern over and including screed bed or bedding layer of 20mm thick in cement mortar 1:4 for laying floor finishesall as specified and directed. |
| 82 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade joint with white cement and pigment, set, laid on 50mm thick sand cushioning complete all as specified and directed. |
| 83 | M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 150mm long 100mm wide and 350mm deep in PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate, jointed in CM 1:4 complete all as specified and directed. |
| 84 | Excavation in post holes (or similar holes ) each n exc 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft and hard soil complete all as specified and as directed. |
| 85 | PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed. |
| 86 | S&F steel work in tubularRoof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 87 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etcGDE Fe410-o- or Fe 310-0complete all as specified and directed. |
| 88 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 89 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 90 | Concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) complete all as specified and directed. |
| 91 | 150mm dia reinforced concrete pipes, class NP-2 laid in trenches and jointed complete with collars complete all as specified and directed. |
| 92 | 100 mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint toslab including bolts and nuts and securing end of stays to wall or roof etc.all as specifiedincluding black japan paints complete all as specified and directed. |
| 93 | M & L for construction of septic tank for 10 Users capacity using sub class B bricks old size, with and including necessary excavation earth work, brick work, concrete work, plastering, returning filling in soft/ loose soil and removal of surplus soil to a distance n.exc 50 m etc complete all as shown in typical drawings No TD-217 sheet 1/7 to 7/7 complete all as specified and directed. |
| 94 | M & L for construction of Soakage well 1.80 m dia and 3 m effective depthwith and including necessary excavation earth work, brick work, concrete work, plastering,filling with brick bats, PCC on topreturning filling in soft/ loose soil and removal of surplus soil to a distance n.exc 50 m etc complete all as shown in typical drawings No TD-309 sheet 1/4 to 4/4 complete all as specified and directed. |
| 95 | Walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete all as specified (PCC bond stone shall be measured and paid separately). |
| 96 | M&L for Cement concrete 1:2:4type B-0 ( Using 12.5 mm graded crushed stone aggregate ) as in surface channel or drain including necessary form work etc, complete all as specified and as directed by the Engr-in-charge. |
| 97 | M&L pre-cast RCC 1:2:4, typeB-1 (using 20 mm graded stone aggregate) in cover slabs for man holes with plain faces finished fair and smooth etc, set in cement Mortar1:6 and including necessary formwork if required incl. demolition of old slabs complete all as specified |
| 98 | Extra over stone walling for hammer dressing (dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm granite or trap stone) to face stones and dressing of face beds and joints of random rubble stone walling, uncoursed or brought upto courses, complete all as specified and directed. |
| 99 | 20 mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brickwork in CM 1:4 , finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 100 | S&F aluminium power coated(colour) frame for door , window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed by EIC (Aluminium section shall be of make Jindal/Hindalco/Indalco) |
| 101 | S&F aluminium power coated(colour) section as in window,ventilator,glazed with aluminium shutter weighting 0.55 kg/mincluding necessary fitting of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, including aluminium grill of 5 to 6 dia, size of mesh not exc 7.5cm in either direction, as approved by GE, complete all as specified etc complete all as specified and directed by EIC (Aluminium section shall be of make Jindal/Hindalco/Indalco) |
| 102 | M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination with aluminium frame work complete all as specified and directed. |
| 103 | S & F in repairs 600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, with sheet glass assembly consisting of 5.5 mm glass sheet 12 mm wide with chromium plated brackets. |
| 104 | S&F fancy type viteous china counter top, wash hand basin, \"OVAL\" shaped,white of size 550x400mm including bottle trapsand piller cock with green marble inserted in 18 mm thick mounted green marble stone slab platform by cutting on oval shaped etccompleted all as specified and directed (NOTE:- Green marble cutting shall be measured and paid separately) |
| 105 | Extra over for cutting and moulding of greenmarble in oval shaped to accommodate WHB of size 550x400mm all as directed by EIC |
| 106 | S&F CP Towel Ring 200mm dia fixed in repair complete all as specified and as directed by Engineer-in-Charge. |
| 107 | S&F Corner Glass self (With CP brackets) 225 x 225 mm complete all as specified and asdirected. |
| 108 | S&F Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered \"Hot\" & \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. |
| 109 | S&F Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed. |
| 110 | S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed. |
| 111 | S&F Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed. |
| 112 | S&F in repairs CP brass towel rail 600 mm long with lower hangers and fixed with brass screws complete all as specified and as directed. |
| 113 | S&F of soap disk type fixed to plug with CP brass screws complete all as specified and as directed. |
| 114 | M & L Point wiring using approved colour coding as per IS code (Red,Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area,single core,PVC insulated and unsheathed FRLS cable 1100V grade,in and including medium grade,PVC concealed conduit ISI marked of dia not less than 25 mm and conduilt accessories concealed in wall/roof/floor etc with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches , sockets, fan regulators etc PVC insulatedPVC insulated multistranded copper condutor 1.5 sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:- |
| 115 | (a) One light point controlled by one SP switch |
| 116 | (b) One Exhaust fan point controlled by one SP switch |
| 117 | (c) One 3 Pin 5 Amp modular Socket on independent board complete all as specified and directed. |
| 118 | All as per item No 114.00 here in before but for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and includingPVC conduit size of not less than 25mm concecled in wall / surfaceincluding sutiable new annealed sunken boxes,modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 5 pin modular socket outlet two in one 16/6 amps on an indeendent board including making good, disturbed surface as it is complete all as specified and directed. |
| 119 | M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 to 32 Amps 240 volt capacity complete all as directed. |
| 120 | S&Fmodular switch one module, 5/6 Amp, one way, 230 volts AC complete all as specified and directed by Engineer-in-Charge. |
| 121 | M&L for modular socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed. |
| 122 | M&L for modular socket out let,5 pin 6ampsand 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. |
| 123 | M&L for modular switch single pole one way 16 amps 240 volts with polycarbonate body complete all as specified and directed.. |
| 124 | S & F ceiling rose, 3 phase, PVC / polycarbonate, surface type, 65mm x 50mm, insulated body, three terminal complete all as specified and as directed by Engr-in-Charge. |
| 125 | S&F of LED Light fitting 20 watt High-quality materials and design. Extruded aluminium housing enhances safety with High quality PC Diffusers Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design, easy to install Efficacy: 110 lm/W and also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling complete all as per directed. |
| 126 | S&F of LED Light fitting 10 watt Trimline Neu is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy: 110 lm/W. Also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as per directed. |
| 127 | S&F of LED Light fitting 05 watt Trimline Neu is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy: 120 lm/W. Also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as per directed. |
| 128 | Supply & fixing in replacement of 35 Watt LED security light fitting with ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP66 protection and with 0.6 mtr long 20/25 mm (as per manufacturer standard)dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specifiedand directed. |
| 129 | Supply and fixing of MCB Metalic Distributition board 12 way, double door, 230 Voltsconcealed flush to wall for mounting MCBs factory made , conforming to IS : 13032 fabricated out of CRCA sheet fitted with DIN channel, neutral link and approriate rated bus bar DBs shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature , between powder paint process to ensure smooth finish and protection against corrsion atmosphere. the DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways as specified, the DBs shall be of IP 43 protection complete all as specified and directed. |
| 130 | Supply and fixing of MCB single pole and neutral (SPN), 240 volts,63 amps breaking capacity 10KA, ‘B’ Series. etc , complete all as specified and directed. |
| 131 | Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘B’ seriescomplete all as specified and directed. |
| 132 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 liters, BEE 5 star rated complete with all accessories such as safety valve,thermostate, NRV,connection piece etc. complete all as specified and as directed. |
| 133 | Supply and fixing Exhaust fans steel body, AC single phase 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed. |
| 134 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6type C-1 chamber with cover and RCC1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion all as directed. |
| 135 | Supply and laying or fixing or passing through existing duct/pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed 10 Sq mm 2 core nominal cross section stranded conductor complete all as specified and directed |
| 136 | M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.NOTE : Punned down thickness of sand shall be measured only. |
| 137 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed. |
| 138 | Supply and lay 40 mm bore dia G.I pipe Light grade with all fittings required for protection of under ground cable including cutting of road surface wherever required and making good to match with existing surface all as specified and directed. |
| 139 | Supply and fix aluminium strip 25 x 3.15mm with saddles and fixing screws, porcelain insulators rawal plugs etc forconductor for roof and fixed on wall upto test point all as specified incl. making good the disturbed surfaces complete. |
| 140 | S&F galvanised iron strip of size 32 x 6 mm buried in ground or fixed on wall mounted on suitable sized porcelaininsulators ( on floor and wall only) including cutting cavitiesfor fixing ofporcelain insulators and finishing with cement plasteron wall / floors and connected to test point including bending, jointing at test points with GI nuts, bolts, with lead washers, jointing strips at all joints incl. making good the disturbed surfaces complete. |
| 141 | S&F air termination single pointed aluminum rod of 12mm dia, 300mm long fixed with02 nos sutable sized nuts,bolts & washers including making good the disturbed surfaces complete all as specified and as directed. |
| 142 | S & F Test point terminal block made of gun metal or phosphorous bronze 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point completed all as specified. |
| 143 | M & L for \"ASHLOK\" make Zinc coated Safe Earthing Electrode (SEE) confirming to IS - 3043 (Code of practice for Earthing ) using pipe - in - pipe technology with the help of Alloy coated ( 250 - 300 microns ) GI pipes , two bags BFC (Back Fill Compound) incl. required excavation & earthwork complete. Each earthing should have resistance below 1 ohms by using earth electrode is used as per siterequirement.DETAILS : MATERIAL USED : Alloy coated ( 250 - 300 microns ) GI pipes.,LENGTH : 3000 mm,BFC : Two Bags ( 25 Kg Capacity ),DIA OF OUTER PIPE : 76.30 mm,DIA OF INNER PIPE : 42.40 mm,( All the above given dimensions may vary +/- 0.1 mm )NOTE: 1) The quantity of BFC indicated above is generally for normal/good soils.In case the soil resistivity is high , the quantity of BFC should be increased & cost of the same is deemed to be inclusive in the quoted rates.2) The rates are also inclusive of provn of concrete pit in PCC (1:3:6) type C - 1 precast RCC (1:2:4) cover slab of size 54 x 54 x 5 cm thick with one handle for its lifting made out of 8 mm dia MS round bar & 10 mm dia MS deformed bars 15 cm both ways as in reinforcement & copper strip 32 x6 mmfor connection of earthing with equipment/DB to be earthed. |
| 144 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
