|
| 1 | Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits/ casing caping and making good the disturbed surface of wall/ floor complete to match with the existing surface/ finishes complete all as specified and directed. |
| 2 | M&L for Point wiring for one light point controlled by one, one way 6 Amp switch with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and new non metallic PVC rigidconcealed conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cableFRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch completeincluding making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/ paint/ distemper) wherever required (as per the existing condition) complete all as specified and directed.Note: The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes and blank plate if required shall be deemed to be included in the unit rate. |
| 3 | All as per item No 02.00 above for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed. |
| 4 | All as per item No 02.00 above but for one bell point controlled by one, one way 5 Amp switch complete all as specified and directed. |
| 5 | All as per Item No 02.00 above but for one light point controlled by two, two way switches complete all as specified and directed. |
| 6 | All as per Item No 02.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 7 | All as per Item No 02.00 above but for One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed. |
| 8 | All as per Item No 02.00 above but with 2 x 2.5 Sqmm + 1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed. |
| 9 | M&L for Point wiring for one light point controlled by one, one way 6 Amp switch with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 20/32 mm wide, with double locking type, includingall accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including PVC terminal box and PVC board making good disturbed surface to match with the existing surface controlled by one switch laminated hylem sheet if required shall be deemed to be included in the unit rate complete all as specified and directed. |
| 10 | All as per Item No 09.00 above but for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed. |
| 11 | All as per Item No 09.00 above but for one bell point controlled by one 5 amp switch complete all as specified and directed. |
| 12 | All as per Item No 09.00 above but for one light point controlled by two two way switches complete all as specified and directed. |
| 13 | All as per Item No 09.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 14 | All as per Item No 09.00 above but for One 3 pin 5 Amps socket out let on independent board complete all as specified and directed. |
| 15 | All as per Item No 09.00 above butwith 2 x 2.5 Sqmm + 1 x 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed. |
| 16 | S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed. |
| 17 | S&F in repair modular switch flush type, 6 Amp. SP, two way ,1 module complete all as specified and directed. |
| 18 | S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed. |
| 19 | S&F in repair modular switch, 16 Amp flush type 1 module complete all as specified and directed.medal/Panasonic/Schneider/Seimens |
| 20 | S&F in repair modular socket outlet, 2/3 pin, 6/16 Amp flush type 2 module complete all as specified and directed. |
| 21 | S&F in repair modular bell push, flush type, 5 Amp,1 module complete all as specified and directed. |
| 22 | S&F in repair modular Fan Regulator step type 2 module ,120W complete all as specified and directed. |
| 23 | S&F in repair modular AC BOX suitable for load current 16 Amp230 Volts AC complete all as specified and directed. |
| 24 | S&F in repair switch piano type, 5 Amp. SP, one way complete all as specified and directed. |
| 25 | S&F in repair switch piano type, 15 Amp. SP, one way complete all as specified and directed. |
| 26 | S&F in repair switch two way switch flush type, 5 Amp complete all as specified and directed. |
| 27 | S&F in repair socket outlet, 2 in one 3 pin, 5 Amp, piano type complete all as specified and directed. |
| 28 | S&F in repair socket outlet, 2 in 1, 5 pin, 5/15 Amp flush type universal complete all as specified and directed. |
| 29 | S&F in repair switch socket outlet combination, 2 in one 3 pin, 5 Amp, piano type complete all as specified and directed. |
| 30 | S&F in repair switch socket combination 2 in 1, 5 pin 5/15 Amp flush type universal complete all as specified and directed. |
| 31 | S&F in repair Electronic fan regulator,100W ,230V ,50Hzstepped socket type for ceiling fan complete all as specified and directed. |
| 32 | S&F in repair switch bell push, flush type, 5 Amp complete all as specified and directed. |
| 33 | S&F in repair bell, AC, 230 V, SP, ding dong type complete all as specified and directed. |
| 34 | S&F in repair Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed. |
| 35 | S&F angle bulb holder for LED fitting including taking down old unserviceable type holder complete all as specified and directed. |
| 36 | M&L for painting of fan (ceiling fan/ exhaust fan/ wall mounted fan) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern complete all as specified and directed. |
| 37 | S&F in repair louver shutter made out GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire) for Exhaust fan 150/300mmsweep including proper fixing with screw in wall at existing Hole complete all as specified and directed. |
| 38 | S&F in repair Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size complete all as specified and directed. |
| 39 | S&F in repair Fan blade for Ceiling fan of 1200mm sweep of white colour complete all as specified and directed. |
| 40 | S&F in replacement canopy for ceiling fan complete all as specified and directed. |
| 41 | Taking down old unsv submain wiring of any size complete all as specified and directed. |
| 42 | M&L for sub main wiring with two run of 4.0 Sqmm PVC un-sheathed, copper conductor cable, 1100 Volt,and one run of copper earth wire 4 Sqmm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/ paint/ distemper) wherever required (as per the existing condition), complete all as specified and directed.Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 43 | All as per item No 42.00 but for 2x6.0 sqmm + 1x6.0sqmm earth wire complete all as specified and directed. |
| 44 | All as per item No 42.00 above but for 2x10.0 sqmm + 1x10.0sqmm earth wire complete all as specified and directed. |
| 45 | S&F in repairs Decorative wall light fixture, site selectable, polycarbonate body, including 9W LED bulb complete all as specified and directed. |
| 46 | S&F in replacement LED tube light fitting 1x 20 watts, 220 volts AC, 1200mm, with Aluminium housing & integrated electronic driver complete with driverwith polycarbonate diffuser & thd, 10 % including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 47 | S&F in replacement LED light with high output diffuser 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 48 | S&F in replacement LED luminaire 600 x 600 x2 mm, (2\"x2\")36 watts, 220 volts AC Recess/ Surface mounted downlighter type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/ Gypsum/ roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface and matching with the existing surface complete all as specified and directed. |
| 49 | S&F in replacement LED luminaire Recess/ Surface mounted downlighter (Round/ Square)r with pressure die cast alluminium heat sink & PC diffuser round shape 15 /18 watts warm white/cool white, 220 volts AC,Cut out dia 6 inch finished in white white powder coatedcomplete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified and directed. |
| 50 | S&F in replacement of 8W LED outdoor new generation landscape lighting fitting Bambo type with 1mtr length IP 65 protection including base to stand alone complete all as specified and directed. |
| 51 | S&F in replacemnt of LED decorative garden post top lantern cap 15 watts with opal acryliwith IP 65 protection warm white Cylindrical LED bollard rings contemporary style and unique design toghter for indirect glare- free lighting. including making all connection using 3 core copper flexible cable drawn through in PVC conduit (if required) complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repairs recessed/ surface spot/ tilled light white LED light with modern design compact size with LED 15W to povide focussed light complete all as specified and directed. |
| 53 | S&F in replacement Engagement light LED type with Red and Green compartment 230 volts with LED lamp 9 watt complete all as specified and directed. |
| 54 | S&F in replacement 5 W LED coloured Adore Lamp B22 Red and green suitable for bulb holder in engagement lights complete all as specified and directed. |
| 55 | S&F in replacement LED bulb 9W complete all as specified and directed. |
| 56 | S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 9 watt LED strip warm white 230 volts complete all as specified and directed. |
| 57 | S&F in replacement warm white LEDlight fitting suitable for mounting on photo frame consisting of 2 Nos LED candle lamp 3 watt warm white 230 volts complete all as specified and directed. |
| 58 | S&F in replacement of hanging table lamp ceiling mounted spring type (adjustable) warm/cool white complete all as specified and directed. |
| 59 | S&F in replacement road/ security light/ bldg light with high power LED fitting as light source ,energy saving envoirmental friendly 60 W with advance features all as complete with fixing arrangement such as GIpipe brakets bend in 120 degree, clamps made out by GI strip suitable for steel or PCC poles, nuts, bolts and washer to be fixing including making all eclectrical connection with three core flexible copper cable etc complete all as specified and directed. |
| 60 | S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep, Min air delivery 230 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) ceiling fanwith remote of color white or (as per site requirment) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt complete all as specified and directed. |
| 61 | Supply and fixing in replacement METALICEXHAUST fans AC single phase 230/240 V of size 300 mm sweep (as per sample) complete all as specified and directed. |
| 62 | Supply and fixing in replacement METALICEXHAUST fans AC single phase 230/240 V of size 250 mm sweep (as per sample) complete all as specified and directed. |
| 63 | Supply and fixing in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample) complete all as specified and directed. |
| 64 | Supply and fixing in replacement PVC body ventilation fan 300mm Sweep, 240 Volt, AC 50 HZ, plastic body including louvers with and including cutting bricks/ stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed by Engineer in charge. |
| 65 | Supply and fixing in replacement of wall fan 400mm (16 inch) 60 watt Oscilating wall fan (KD white) wall mounted speed 1350 RPm including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement morter complete all as specified and directed. |
| 66 | Supply and fixingin repairs of cordless bell electronic type 230 volts AC complete all as specified and directed. |
| 67 | Supply and fixing in repairs of remote controlled bell electronic type 230 volts ACcomplete all as specified and directed. |
| 68 | Supply and fixing in repairs of Plug Top 15 Amps, 230volts AC, 3-pin complete all as specified and directed. |
| 69 | Supply and fixing in repairs of Plug Top 5 Amps, 230volts AC, 3-pin complete all as specified and directed. |
| 70 | S&F in repair Capacitor (2.5-4) MFD for ceiling fan/ Exhaust Fan of any make, any model and any sweep complete all as specified and directed. |
| 71 | S&F in repair motor starter single phase for AC of any make, any model and any capacity complete all as specified and directed. |
| 72 | S&F in replacement three core 1.5 sqmm PVC service cable having copper strands completet all as specified and directed. Note: fixing the cable with clamp / shaddles included in the quoted rate |
| 73 | S&F in replacement remote suitable for existing BLDC fan, make as per existing sample complete all as specified and directed. |
| 74 | M&L for detecting faults in LT electric supply distribution system in various offices complex and rectifiying the defects for restoring supply including replacing of unserviciable defective electrical accessories complete all as specified and directed.Note: (i) Spares shall be measured and paid under respective item of schedule .(ii) Essential material like, complain slip book, insulation tape, screws, wodden/ plastic gutka and all tools required for carrying out the works and insutruments to the defect fault shall be deemed to be included in the quoted rate. |
| 75 | S&F in replacement PVC wire 1.5 Sqmm of FRLS PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. |
| 76 | S&F in replacement PVC wire 2.5 Sqmm of FRLS PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. |
| 77 | S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 A switch and one 5 A socket complete all as specified and directed. |
| 78 | S&F in replacement PVC gang box with cover four module suitable for fitting one 15A switch and one socket complete all as specified and directed. |
| 79 | S&F in replacement PVC gang box with cover six module suitable for fitting one 15A switch and one socket complete all as specified and directed. |
| 80 | S & F in repair PVC casing caping of any size complete all as specified and directed. |
| 81 | S&F GI Raceway made from 1.5mm thick pregalvanized sheet for top, bottom & sides and complete with top cover with rubber gasket of size 100x38mm complete for mounting and supporting the cable tray system, along with vertical bends, including taking down and refixing and type of electric/signal cable, if require through wall/ floor cutting and making good surface of disturbed area, complete all as specified and directed. |
| 82 | S&F in repair GI bracket for raceway mentioned in above item here-in-before of 100mm width, complete all as specified and directed. |
| 83 | S&F in repair coupler for raceway of 100 mm width complete all as specified and directed. |
| 84 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps concealed in wall complete all as specified and directed. |
| 85 | S&F in replacement 25-40 mm dia bore medium grade GI pipe site selectable (not less than 1.2 Mtr long bend to shape) and fixed to wall/ Pole with 2 nos of mounting plate with suitable nuts and boltor fixed to pole with suitable bracket, nuts and bolts complete all as specified and directed. |
| 86 | S&F in replacement for sheet metal enclosure TPN DB-VTPN 4 way 415 V, double door, 200 A copper bus bar, IP 43, Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed. |
| 87 | S&F in replacement for sheet metal enclosure TPN DB-VTPN 8 way 415 V, double door , 200 A copper bus bar , IP 43 , Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed. |
| 88 | S&F in replacement for sheet metal enclosureTPN DB- 4 way 415 V, double door, 200 A copper bus bar, IP 43,Suitable for 63-125 Amp MCCB as incomer as flush mounted complete all as specified and directed. |
| 89 | S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. |
| 90 | S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. |
| 91 | S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. |
| 92 | S&F in repair MCB TPN 40-63 Amps, C series, 10 KA \"B\" series 415 Volt complete all as specified and directed. |
| 93 | S&F in repair MCCB 4 Pole 415V Fixed type 80-100A with breaking capicity 16 KA complete all as specified and directed. |
| 94 | S&F in replacement of MCB SP 6-32 Amp, 10kA complete all as specified and directed. |
| 95 | S&F in replacement of moduler MCB SP 16 Amp,240V 3kA, C Curv, fitted in main switch board including 2.5 sqmm wire connecting socket & modular MCB complete all as specified and directed. |
| 96 | S&F in replacement of MCB SPN 20-32 Amp, 10kA complete all as specified and directed. |
| 97 | S&F in repair MCB DP 40 Amps, C series, 230 Volts complete all as specified and directed. |
| 98 | M&L in replacement for maintenance free chemical earthing with enviornment friendly earthing system consisting of 40 mm dia M S earth eletrode with electrolytic grade copper coating of 3 mtr length, to be lowered in 150 mm dia bore including filling backby earth enhancing compound (10 kg x 3 bag) minimum and the top of the bore shall be finished with FRP pit cover of suitable size. Earth resistance should be less than 1 ohm complete all as specified and directed.Note: Earth work , earthing chamber with cover of FRP and testing of earthing will be deemed to be included in quoted rate. |
| 99 | M&L in replacement Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge.Note: (i) The above quoted rate shall include cost of main earthing wire 4mm dia charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GIwater pipe including GI protection pipe 15mm dia light grade for earth strip etc.(ii) The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price. |
| 100 | S&F in replacement Earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd copper strips of size 25 mmX4mm complete all as specified and directed. |
| 101 | Supply and laying in replacement of XLPE LT cable size of 240 Sqmm x 3.5 core 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/ fixed to wall/ pole/ laid in floor including necessary connections and suitable size of thimbling and minor consumables spares like thimbles, bakelite board etc for connection shall be included in the quoted rate complete all as specified and directed by Engineer-in-Charge.Note : Excavation, earth work, sand cushioning, brick protection and pipe shall be included in the quoted rates and nothing shall be paid extra. |
| 102 | All as per item No 101.00 above but for size 185 Sqmm x 3.5 core complete all as specified and directed. |
| 103 | All as per item No 101.00 above but for size 150 Sqmm x 3.5 core complete all as specified and directed. |
| 104 | All as per item No 101.00 above but for size 120 Sqmm x 3.5 core complete all as specified and directed. |
| 105 | All as per item No 101.00 above but for size 70 Sqmm x 3.5 core complete all as specified and directed. |
| 106 | S&F in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 16 sqmm complete all as specified and directed. |
| 107 | S&F in replacement Cable jointing kit for 1100 voltcomplete with jointing material andaccessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size upto 35 sqmm complete all as specified and directed by Engr in charge. |
| 108 | All as per item No 107.00 above but for size 50 to 95 sqmm complete all as specified and directed. |
| 109 | All as per item No 107.00 above but for size 120 to 240 sqmm complete all as specified and directed. |
| 110 | Material and labour for carryout Physical check of DB TPN /LT Panel/ feeder pillar box of any size & capacity, cleaning of burnt/ damage accessories (MCCBs, MCBs, Indicators, meters, selector switches, CTs etc) if required, cleaning complete with cleaning material (Petrol/ CRC-226), tightening of all nuts, bolts and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate all as directed and replacement of all MCCBs as required complete all as specified and directed.Note: (i)MCCBs, MCBs, indicators, meters, selector switches, CTs etc shall be measured and paid separately. (ii)Minor parts like thimbles, GI nuts, bolts, wire for internal wiringetc and cleaning meterials shall be included in quoted rates. |
| 111 | S&F in replacement of MCCB TPN 160 Amp, 25 kA thermal type complete all as specified and directed. |
| 112 | S&F in replacement of MCCB TPN 250 Amp, 25 kA thermal type complete all as specified and directed. |
| 113 | S&F in replacement digital type Ampere meter range 0-(100/200/400/1000) / 5 Amps, square type, flush mounted of size 96 mm x 96 mm including provision of CTs and selector switch ofproper ratio size and making connection with copper conductor cable of suitable size complete all as specified and directed. |
| 114 | S&F in replacement digital type volt meter range upto 1000 V AC-panel mounting type, square type, flush mounted of size 96 mm x 96 mm including provision of PTs and selector switch of proper ratio size and making connection with copper conductor cable of suitable size complete all as specified and directed. |
| 115 | S&F in replacement digital type PF meter range, square type, flush mounted of size 96 mm x 96 mm x42mm input signal 1 phase 2 wire/3 phase 4 wire 23o volt AC 50 Hz ,current 5A AC including provisionselector switch ofproper ratio size andmaking connection with copper conductor cable of suitable size complete all as specified and directed. |
| 116 | Decarbonising/ cleaning of Existing LT panelcubical type of various size consists of bus bar and circuit chamber, metering chambers CTs and relays chambers, checking the bus bar joints, bus bar and circuit spouts, cleaning and applying Busbar Insulation Tape to the bus bars, checking the current transformer, applying Monoplast compound at the bus bar joints after tightening of joints, replaced new suiable size of lugs /suitable copper control cable and reassembling, if any rusted sheet replaced with new sheet as per existing size complete all as specified and directed.Note: Cost of lubricant/ cleaning agents (CRC & rust remover) / hardware like springs/ bolts/ nuts/ washers,lugs/ suitable copper cables cost of labour, T&P required for replacement shall be deemed to be included in the quoted rate. |
| 117 | M&L for spots with thinner applying two coats of spray painting priming with aluminium oxideon outside with spraying machine to LT Panels indoor/outdoor after disconnecting of power supply from incoming and LT supply from outgoing complete all as specified and directed. |
| 118 | M&L for shifting of LT panel board/ LT feeder pillar box from low line side to as required level minimum 1.2 Mtr hight including taking down existing LT cable of any size, refixing as same condition incomming and out goining cables and grouting of LT panel, provn of PCC foundation complete all as specified and directed by Engr-in-Charge. |
| 119 | S&F in replacement saddle for Electrical cable mountingmetal, strong corrosion condition resistance, easy installations of sizes 6cmX4.5cmX2.5cm complete all as specified and directed. |
| 120 | S&F in replacement Electrical cable lugs aluminium,strong corrosion condition resistance, easy installations of sizes 16 Sqmm to 240 sqmm complete all as specified and directed. |
| 121 | Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed. |
| 122 | Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps complete all as specified and directed. |
| 123 | S&F in replacement street light luminaires, LED type 90 watts, 230 volts AC out door type with high pressure die cast aluminium housing and heat resistant flat complete with driver, lampbracket GI pipe light grade 1.5 meter long made out of 40 mmbore bend to shape, flat iron clamps made out of 50x6mm flat iron with nut bolts and washers including painting clamps and electric connection with three core 1.5 sqmm copper cable complete all as specified and directed. |
| 124 | S&F in replacement flood light luminaires, LED type 90 watts, 230 volts AC out door type with rectengular with innovative thermal managment in multiple optics and equipped with IP 66 protection resistance to impact and corrosion glare free complete with driver, lamp complete all as specified and directed. |
| 125 | Supply and fixing in replacement LED driver of 70/90/100/120 watt suitable for LED fitting complete all as specified and directed. |
| 126 | S&F in replacement of aesthetically designed decorative gate LED light of 18 W warm white metal bodyfixture with white acrylic shade including suitable LED lamp of 18 W having Lamp base E22 complete all as specified and directed. |
| 127 | S&F in replacement industrial type & heavy duty, Exhaust fan450 mm sweep metalic body, copper woumded motor and metalic blades with Louver shutter, fixing to the wall with nut bolts/fastner and cutting of hole if required included in the quoted rates complete all as specified and directed. |
| 128 | S&F in replacement street light pole box pvc body with bus bar suitable for phsse neutral and earth connection and provision of fixing one SP mcb for ON/OFF control strret lights complete all as specified and directed. |
| 129 | M&L for attending breakdown of DG set at anytime including HOLIDAYS (Saturday, Sunday national holiday) with one skilled mechanic and 2 nos helper with all the equipments (multimeter, spanner, spray to remove carbon, fault locating machine if any required), opening of DG set cleaning piston, water body, cylinder liner and other joint rings, greasing to each parts complete all as specified and directed.Note: Spare parts will be measured separately. Failure or delay to attend the complaints must be penalised by Rs 500/ Day |
| 130 | Servicing and preventive maintenance of DG set of capacity 40KVA, 62.5 KVA, 125 KVA, 160 KVA ofby taking out U/S spares, Cleaning by brushing to remove dust including cleaning of filter, Checking of all nuts, bolts tightening where ever necessary, check up engine oil level, coolant level and Labour for top up if necessary, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc greasing oiling and checking For smooth functioning of DG Set complete all as specified and directed by Engineer in charge.Note: (i) Any spares,Engine oil,coolant,unserviceable spares required to be replaced shall be measured paid for separately under respective items as suppy only. (ii) Minor spares like nuts,bolts and consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate |
| 131 | Supply only in replacement Fan belt B-56, for DG set capacity 40KVA, 62.5 KVA, 125KVA and 160 KVA complete all as specified and directed. |
| 132 | Supply only in replacement Air cleaner for DG set capacity 40KVA, 62.5 KVA,125KVA and 160 KVA complete all as specified and directed. |
| 133 | Supply only in replacement Diesel Filter for DG set capacity 40KVA, 62.5 KVA, 125KVA and 160 KVA complete all as specified and directed. |
| 134 | Supply only in replacement Oil filter for DG set capacity 40KVA, 62.5 KVA, 125KVA and 160 KVA complete all as specified and directed. |
| 135 | Supply only in replacement High pressure wire braided diesel pipe with benjo bolt 1 mtr longfor DG Set upto capacity 40 to 160 KVA complete all as specified and directed. |
| 136 | Suppy only in replacement hose pipe with clamp for DG set 40KVA, 62.5 KVA, 125KVA and 160 KVA complete all as specified and directed. |
| 137 | Supply only in replacement Kirloskar Engine Oil 15 W 40 complete all as specified and directed. |
| 138 | Supply only in replacement Battery terminal gun metal as per sample complete all as specified and directed. |
| 139 | Supply only in replacement Bettery Lead with nagative and positive brass terminals of suitable sizes and length of each lead complete all as specified and directed. |
| 140 | Supply only in replacement Coolant ready mix complete all as specified and directed. |
| 141 | Supply and filling of battery water with electrolyte Mix complete all as specified and directed. |
| 142 | Servicing of Generator AMF Panel for 40KVA, 62.5 KVA, 125KVA and 160 KVA Gen set complete including and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate labour for replacement ofu/s spares, testing complete all as specified and directed.Note: Any spare parts not consided in said item will be measured and paid seperately as supply only under respective items |
| 143 | Supply only in replacement Single phase preventor VSP II for 3 phase motor, make minilec or as per sample complete all as specified and directed by Engg in charge. |
| 144 | Supply only in replacement Battery Charger12 Volt DC,for AMF Pannel complete all as specified and directed. |
| 145 | S&F in replacement of battery 12Vupto 150 AH maintenance free battery, 12 Volt intially charged with suitable size of copper leads and brass terminals complete all as specified and directed. |
| 146 | Supply only in replacement Relay 24V,11 pin with base for AMF Pannel complete all as specified and directed. |
| 147 | Supply only in replacementrelay 415 VAC for AMF Pannel complete all as specified and directed. |
| 148 | Supply only in replacementAMF panel timer relay for circuits 230Volt AC supply as per existing make ad capacity complete all as specified and directed. |
| 149 | Supply only in replacement 3 pole power contactor 160 A ,MNX 140 for AMF Pannel complete all as specified and directed. |
| 150 | Supply only in replacement 3 pole power contactor 100 AmpMNX 80 for AMF Pannel complete all as specified and directed. |
| 151 | Supply only in replacement 3 pole power contactor 250 Afor AMF Pannel complete all as specified and directed. |
| 152 | Supply only in replacementMCCB3 pole 250 A25 KA for AMF Pannel complete all as specified and directed. |
| 153 | Supply only in replacement MCCB3 pole 160 A16 KA for AMF Pannel complete all as specified and directed. |
| 154 | Supply only in replacement MCCB3 pole 100 A 16 KA for AMF Pannel complete all as specified and directed. |
| 155 | Dismantling of DG Set Part i.e. Cylider head ,Turbo ,Fuel Pump and taking from the site to workshop for repair and assembling to the DG set including load testing of DG set capacity 62.5KVA,125KVA complete all as specified and directed.Note: Any spare parts not consided in said item will be measured and paid seperately as supply only under respective items |
| 156 | Supply only in replacement Cylinder liner with joint ring any capacity complete all as specified and directed. |
| 157 | Supply only in replacementPiston assembly any capacity complete all as specified and directed. |
| 158 | Supply only in replacementGasket for cyl head (1.22mm) any capacity complete all as specified and directed. |
| 159 | Supply only in replacementSet of joints (for PG )/4H.3031any capacity complete all as specified and directed. |
| 160 | Supply only in replacementSet of O rings any capacity complete all as specified and directed. |
| 161 | Supply only in replacement Set copper washers any capacity complete all as specified and directed. |
| 162 | Supply only in replacementInlet and exhuast valve pair any capacity complete all as specified and directed. |
| 163 | Supply only in replacementValve guide (for inlet & exhuast) any capacity complete all as specified and directed. |
| 164 | Supply only in replacementValve seat insert (inlet) any capacity complete all as specified and directed. |
| 165 | Supply only in replacementValve seat insert (exhaust) any capacity complete all as specified and directed. |
| 166 | Supply only in replacementValve seat any capacity complete all as specified and directed. |
| 167 | Supply only in replacementValve collet any capacity complete all as specified and directed. |
| 168 | Supply only in replacementLE bearing STD any capacity complete all as specified and directed. |
| 169 | Supply only in replacementSpin on filter for lubricant ing oil any capacity complete all as specified and directed. |
| 170 | Supply only in replacementPrimary Element any capacity complete all as specified and directed. |
| 171 | Supply only in replacementSecondary Element any capacity complete all as specified and directed. |
| 172 | Supply only in replacementCylinder head repair any capacity complete all as specified and directed. |
| 173 | Supply only in replacement Turbo Repair any capacity complete all as specified and directed. |
| 174 | Supply only in replacement Injector Repair any capacity complete all as specified and directed. |
| 175 | Supply only in replacementFuel Pump/Silencer / Radiatorrepair any capacity complete all as specified and directed. |
| 176 | Supply only in replacementLub oil complete all as specified and directed. |
| 177 | S&F in repair of Self Starter 24 volts suitable for 125 KVA and 160 KVA DG Sets complete all as specified and directed. |
| 178 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead iron strip 32X6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation, earth work, testing on completion complete all as specified and directed. |
| 179 | S&F in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 10 sqmm complete all as specified and directed. |
| 180 | S&F in replacement of MCCB TPN 200 Amp, 25 kA thermal type complete all as specified and directed. |
| 181 | S&F in replacement of MCCB TPN 400 Amp, 35 kA thermal type complete all as specified and directed. |
| 182 | S&F in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 400 Amps complete all as specified and directed. |
| 183 | S&F in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 1600 Amps complete all as specified and directed. |
| 184 | S&F in replacement industrial type & heavy duty, Exhaust fan600 mm sweep metalic body ,copper woumded motor and metalic blades with Louver shutter ,fixing to the wall with nut bolts/fastner and cutting of hole if required included in the quoted rates complete all as specified and directed by Engineer in charge. |
| 185 | S&F in replacement Three Phase Line Protector of capacity 25 kVA to safeguard load with the featuresof Auto Phase Sequence correction (APC) facility, single phasing protection, high & low voltage shut down, overload protection, etc. and By-Pass facility for emergency use complete all as specified and directed. Make :- Sinetrac or equivalent |
| 186 | S&F in replacement Copper connecting cable 16 Sqmm multi strand (35 Mtr Each) & copper thimbles with solder & flexible pipe complete all as specified and directed.Note: (a) Srl Item No 02.00, 16.00, 18.00, 42.00, 48.00 to 52.00, 59.00 to 65.00, 75.00, 76.00, 86.00 to 91.00, 98.00, 99.00, 101.00 to 104.00, 113.00 to 115.00, 123.00, 124.00, 127.00, 178.00 & 184.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
