|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth of pothole not exceeding 50 mm including rolling over the broken surfaces using 8 to 10 tonnes power roller to required camber and gradient complete all as specified and as directed. |
| 2 | M & L for cement concrete works in pavement/ hard-standing of flexural strength 40 kg/per square centimetre, using 20 mm nominal size graded crushed stone aggregate, any thickness of concrete complete all as specified and as directed. |
| 3 | Material and labour for forming 25mm wide expansion joint in concrete slab, full depth filled with 22-25mm thick premoulded compressible synthetic filler board as specified and provision of closed cell, mediumdensity, cross linked polythene foam backup road of 30mm dia, over 25mm thick premoulded compressible filler board, priming top 15mm filled with polyurethane/ polysulphide base sealant confirming to BS 5212, BS 4254 and EN 41875-2003, with min MAF +30% complete all as specified and as sdirected and as per manufacturer\"r insstruction. |
| 4 | M & L for forming contraction joint 65 mm deep X 10 mm wide filled with sealing compound Grade \"A\" after priming the contact surfaces using suitable primer complete all as specified and as directed. |
| 5 | Finishing surfaces to concrete roads, pavements by brooming complete all as specified and as directed. |
| 6 | M & L for polythene film, black, 100 micron laid in floors complete all as specified and as directed. |
| 7 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 8 | Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5 m high from base complete all as specified and as directed. |
| 9 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions |
| 10 | M & L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of lime stone, sand stone, flint or quartzite of grading 2 (63 to 45 mm size) or of grading 3 (53 to 22.4 mm size), spread, rolled and compacted to required gradient and camber with three wheel-power roller of 80 to 100 kN capacity or an equivalent vibratory roller complete all as specified and as directed. |
