|
| 1 | 20 mm cement plaster of mix : |
| 2 | 1:4 (1 cement: 4 coarse sand) |
| 3 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 4 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 6 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 7 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 8 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 9 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 10 | Orissa pattern W.C Pan of size 580x440 mm |
| 11 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 12 | 3 mm thick |
| 13 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 14 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 15 | 10 litre capacity - White |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 17 | 20 mm nominal outer dia. Pipes. |
| 18 | 25 mm nominal outer dia .Pipes. |
| 19 | Grading roof for water proofing treatment with |
| 20 | Cement mortar 1:4 (1cement : 4 coarse sand) |
| 21 | Providing water proofing compound URP 301 LIKE Dr. Fixit Pidcrete (SBR Latex based) and equalent waterproofing and repair solution |
| 22 | Dismantling of plaster 20 mm to 25 mm thick & takingout damaged APPsheet and cleaning the surface of roof complete including disposal of rubbish to the dumping ground within 50metres lead: |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (Replace old exist CI bend i/c cutting wall and dismantling CI pipe etc. complete) |
| 24 | 150 mm bend |
| 25 | Credit of materials / items obtained from dismantling being unserviceable. |
| 26 | PVC Bib cock,stop cock,ball cock, cistern, CPVC pipe, PVC tank and similar items. |
| 27 | MS fittings for doors & windows like SDB, TB, Handle, Hinges, G.I pipe and all similar items |
