|
| 1 | Civil Works |
| 2 | SITE CLEARANCE |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | EARTH WORK EXCAVATION |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | PCC WORK |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) |
| 9 | RCC WORK |
| 10 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; All works upto plinth levelConcrete of M25 grade withminimum cement content of 330 kg /cum |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;All works above plinth level upto floor V level Concrete of M25 grade withminimum cement content of 330 kg /cum |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centering and shuttering including strutting, propping etc. and removalof form Foundations, footings, bases of columns, etc. for massconcrete |
| 15 | Centering and shuttering including strutting, propping etc. and removalof form for Arches, domes, vaults up to 6 m span |
| 16 | MASONRY WORK |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 18 | PLASTERING |
| 19 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) |
| 20 | FLOORING |
| 21 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.Red sand stone |
| 22 | Providing, supplying, and laying triple-washed, screened, sub-rounded grain silica playground sand to function as an impact-attenuating safety surface for children\"s play areas, including the preparation of the sub-base, spreading, compaction to achieve design density, and levelling to the required finished thickness and slope, complete in all respects. |
| 23 | STEEL WORK |
| 24 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 25 | Providing at all heights, levels and locations Aluminium profileindustrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal completeupto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing andapproved sealent where required etc. but excluding the cost of purlins, rafters and trusses. 0.71 mm thick, the profile detail width 1044/920 mm,cover width 1000/875 mm. |
| 26 | Supply and installing CNC cuttingand finishing of 2 mm thick Galvanized Iron (GI) sheets using CNC Laser or CNC High-Definition Plasma for maximum precision and all cut edges shall be de-burred, cleaned of dross/slag, and smoothed prior to delivery. Components must be flat, free from warpage, rust, or surface damage complete as per the direction of site engineer in charge. |
| 27 | PAINTING |
| 28 | Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two or more coats on new work |
| 29 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 30 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm |
| 31 | PLUMBING & SANITARY FITTINGS |
| 32 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall |
| 33 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall |
| 34 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm dia 10Kgf/cm2 |
| 35 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 36 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 |
| 37 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 38 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore |
| 39 | Providing and fixing brass bib cock of approved quality20 mm nominal bore |
| 40 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 10Kgf/cm2 - External work - Exposed on wall |
| 41 | CHILDRENS PLAY EQUIPMENTS |
| 42 | Supply and installation of DX-AMZON MAPS Duplex Multi Activity Play Systems, suitable for children aged 3 to 12 years, with a product area of 40.1 X 34.3 X 16.8 ft and a safe play area of 46.1 X 40.3 ft, consisting of platforms made of anti-skid FRP(Fiber Reinforced Plastic) with ribbed undersides, minimum thickness of 3–5 mm, in hexagonaland octagonal shapes; connected with UV-stabilized Nylon-6 injection-molded clamps and supported on 100NB GI vertical pipes; includes 2.4 m long FRP curve bridge with side railings of LLDPE rotational molded material and 20NB GI pipe supports, 3 ft high ROTO staircase made from reinforced LLDPE with inbuilt handrails, FRP split level and 7 ft ladders with anti skid surfaces, FRP mini wave slide (3 ft), ROTO double wave slide (7 ft), FRP roller slide with LLDPE rollers on 12 mm dia rods, ROTO straight tube slide (9 ft) with transparent modules and stainless-steel fixings, and FRP spiral slide (9 ft) with hot-dip galvanized pipe railings and nylon clamps; also includes 3 ft high MAPS wave net climber using 18 mm dia nylon rope, spiral climber of 25NB and 40NB GI pipes, MAPS bridge ladder with 100NB verticals and20NB steps, bubble panel railings with acrylic panels in LLDPE frames, ROTO Cross & Zeroactivity board, cross-checkered railings, FRP hexagonal canopy with flag, ROTO butterfly, flower and flag decorative elements—all ROTO components made from food-grade, UV stabilized LLDPE with 5–8 mm thickness, and FRP components made using hand-laid process with international grade gel coats and thickness 3–5 mm; all metal pipes hot-dip galvanizedwith 40–60 micron GI coating, and powder coating with polyester-based 50–70 micron film,tested via cross-hatch adhesion test; equipment protected by 3-coat marine-grade paint for enhanced corrosion resistance; fasteners are galvanized/S.S./Allen bolts with nylon lock nutsand PVC caps on open pipe ends for safety; ISO 9001:2015 certified product; color inmulticolor or customized RAL shades; packaging with 3-layer system including EPE foam, HDPE film and stretch wrap, etc. complete as approved by the Engineer-in-Charge. |
| 43 | Supply and installation of Chair-Seat Merry-Go-Round (MGR) suitable for children aged 3 to 12 years, accommodating 4 children at a time, with an overall product area of 2.1 m diameter and safe play area of 3.1 m diameter, consisting of a main MGR frame fabricated from 40NB hot dip galvanized pipes (GI coating up to 60 microns) welded at the base to a circular plate for bearing assembly and reinforced with four 25NB pipes, center support made of 80NB hot-dip galvanized pipe of 500 mm length welded to a 150x150 mm base plate at bottom and a 200 mm OD circular plate at top for bearing assembly, equipped with a dual bearing system for smooth rotation, footrests fabricated from 15NB galvanized pipes with welded end caps and plates, four animal-shaped seats (e.g., duck) made from rotationally molded LLDPE (Linear Low-Density Polyethylene) with UV-stabilized, food-grade, non-toxic material in 5 mm to 8 mm thickness for high durability and seamless finish, all pipe ends sealed with GI/PVC caps for safety, fasteners including galvanized or stainless steel Allen bolts or button head Allen bolts with nylon lock nuts and PVC bolt caps, finished with 3-coat marine-grade paint for enhanced corrosion resistance, color options in multicolor or customized RAL shades, ISO 9001:2015certified product, and packaged in three protective layers including EPE foam, HDPE film, and stretch wrap, etc. complete as approved by the Engineer-in-Charge. |
| 44 | Supply and installation of Metal Platform Merry Go Round (MGR) suitable for children aged 5 to 12 years, accommodating 5 children at a time, with an overall product area of 5 ft diameter and safe play area of 8.2ft diameter, consisting of a Deckin Checkered/Anti-slip Plate Steel (min. 3mmthick) or Fibre Reinforced Plastic (FRP) with an anti-skid surface. Deck Finish should be Non-toxic, UV-stabilized, non-slip texture. Supporting frame/structure underneath the platform made of approx 50mm square or round Mild Steel (MS) Pipe or angle, hot-dip galvanized. MS Pipe, minimum OD 32 mm to 40mm, minimum 2.5mm wall thickness.DesignFour (4) or more ergonomically designed handles/railings providing safe support and grip for children while spinning.AttachmentHandles must be securely welded and reinforced to the platform or underlying frame, with no sharp edges or pinch points.Heavy-duty, sealed, thrust bearing or taper roller bearing system designed for continuous, high-impact rotation and minimal maintenance.Coatings must be UV-stabilized, weather-resistant, non-toxic, and lead-free.All steel components (frame, handles, shaft) must be protected by Hot-Dip Galvanization before powder coating. complete as approved by the Engineer-in-Charge. |
| 45 | Supply and installation of Free standing Playground Slide with a combination of a smooth Fiber Reinforced Plastic (FRP) chute and a Steel/Composite rung ladder of 7 ft height Straight, Open Chute Slide ,required Safety Use Zone must extend a minimum of 1.8 meters from all sides of the structure. Material is of High-Density Polyethylene (HDPE) or Fiber Reinforced Plastic (FRP). Material must be non-toxic, anti-static, and UV-stabilized. The sliding surface (the bottom of the chute) must be smooth and seamless. The rung sectin should be The multi-colored horizontal sections are decorative elements/bumpers made of thick HDPE or MS pipe, securely molded/fastened to the chute structure .Main Uprights Supports is of MS Pipe, minimum OD 90 mm orminimum OD 60 mm for ladder uprights with min. 3mmwall thickness.Ladder Rungs :MS Pipe, minimum OD 32 mm, non-slip design (e.g., perforated sheet metal, textured composite, or dimpled pipe). Rungs must be evenly spaced .GuardrailsHandrails and guardrails must extend the full length of the ladder and platform area. Top railing height must be min. 760 mmabove the platform.Platform DeckDeckingat the top of the ladder must be non-slip sheet metal (min. 2mmHDPE/Composite.complete as approved by the Engineer-in-Charge. |
| 46 | Supply and installation of Duck SPRING RIDER, suitable for children aged 3–6 years,designed for single-user play, with a product area of 3.3 X 1.6 ft and a safe playarea of6.5 X 5 ft; hopper body made using rotational molding process from UV stabilized, food-grade LLDPE (Linear Low Density Polyethylene), with a thickness rangingfrom 5 mm to 8 mm, ensuring seamless and durable construction; hopper is bolted to a springassembly consisting of a spring made from spring steel, MS top and square base plates with GIplating, and integrated footrest, all secured with U-bolts; spring assembly is mounted on afoundation stand made of 40NB galvanized pipe with GI coated top and bottom plates; all metalpipes are hot dipped galvanized with GI thickness up to 60 microns; finished with 3-coat marinepaint for corrosion resistance and powder coating using pure polyester raw material with dryfilm thickness of 50–70 microns, tested via adhesion (cross hatch cutter) method; all nuts andbolts are galvanized/S.S./Allen/Button Head with nylon lock nuts and PVC caps on all openends for safety; ISO 9001:2015 certified; available in multicolor options as per RAL shade;packed with 3-layer safety packaging—EPE foam, HDPE film, and stretch wrap, etc. completeas approved by the Engineer-in-Charge |
| 47 | Supply and installation of elephant SPRING RIDER, suitable for children aged 3–6 years, designed for single-user play, with a product area of2.6 X 1.3 X 2.8 ft and a safe playarea of 4 X 3 ft; hopper body made using rotational molding process from UV stabilized, food-grade LLDPE (Linear Low Density Polyethylene), with a thickness rangingfrom 5 mm to 8 mm, ensuring seamless and durable construction; hopper is bolted to a springassembly consisting of a spring made from spring steel, MS top and square base plates with GIplating, and integrated footrest, all secured with U-bolts; spring assembly is mounted on afoundation stand made of 40NB galvanized pipe with GI coated top and bottom plates; all metalpipes are hot dipped galvanized with GI thickness up to 60 microns; finished with 3-coat marinepaint for corrosion resistance and powder coating using pure polyester raw material with dryfilm thickness of 50–70 microns, tested via adhesion (cross hatch cutter) method; all nuts andbolts are galvanized/S.S./Allen/Button Head with nylon lock nuts and PVC caps on all openends for safety; ISO 9001:2015 certified; available in multicolor options as per RAL shade;packed with 3-layer safety packaging—EPE foam, HDPE film, and stretch wrap, etc. completeas approved by the Engineer-in-Charge |
| 48 | Supply and installation of elephant SPRING RIDER, suitable for children aged 3–6 years, designed for single-user play, with a product area of2.6 X 1.3 X 2.8 ft and a safe playarea of 4 X 3 ft; hopper body made using rotational molding process from UV stabilized, food-grade LLDPE (Linear Low Density Polyethylene), with a thickness rangingfrom 5 mm to 8 mm, ensuring seamless and durable construction; hopper is bolted to a springassembly consisting of a spring made from spring steel, MS top and square base plates with GIplating, and integrated footrest, all secured with U-bolts; spring assembly is mounted on afoundation stand made of 40NB galvanized pipe with GI coated top and bottom plates; all metalpipes are hot dipped galvanized with GI thickness up to 60 microns; finished with 3-coat marinepaint for corrosion resistance and powder coating using pure polyester raw material with dryfilm thickness of 50–70 microns, tested via adhesion (cross hatch cutter) method; all nuts andbolts are galvanized/S.S./Allen/Button Head with nylon lock nuts and PVC caps on all openends for safety; ISO 9001:2015 certified; available in multicolor options as per RAL shade;packed with 3-layer safety packaging—EPE foam, HDPE film, and stretch wrap, etc. completeas approved by the Engineer-in-Charge |
| 49 | Supply, Hot-Dip Galvanization, Powder Coating, and Installation of Heavy-Duty Triple-Bay, Three-Seat Freestanding Swing Set. |
| 50 | Supply and installation of MULTI SEATER SEE-SAW, suitable for children aged 3–10 years,designed for use by 4 children at a time, with a product area of 0.5m x 3m (1.6ft x 9.8ft) and asafe play area of 1.5m x 4m (4.9ft x 13.1ft); see-saw lever made of 80NB galvanized pipe,2950mm in length, providing strong load-carrying capacity; seats made of LLDPE via rotationalmolding, sized 295x190x70mm, UV stabilized, food-grade, non-hazardous plastic with 5–8 mmthickness for durability and seamless construction; handle grips made from 20NB galvanizedpipe with end caps and compliant with EN 1176-1:2008 for hand grips; see-saw stand includesspecial Nylon-6 bush enclosed in a seamless pipe and hinged to a 50NB support pipe, with ISAbase for firm foundation; impact attenuators made from 20NB galvanized pipe; heavy-dutynylon bush-type bearings used for pivot; all pipes are hot dipped galvanized with GI thicknessof 60 microns; coated with 3-coat marine paint for corrosion resistance and powder coatedusing pure polyester material with a dry film thickness of 50–70 microns, tested by cross hatchcutter adhesion method; nuts and bolts are galvanized/S.S./Allen/Button Head types with nylonlock nuts and PVC bolt caps, and all pipe ends are sealed with GI or PVC caps for user safety;ISO 9001:2015 certified; available in multicolor options as per RAL shades; packed with triple layer safety packaging (EPE foam, HDPE film, and stretch wrap), etc. complete as approved bythe Engineer-in-Charge. |
| 51 | Supply and installation of two SEATER SEE-SAW, suitable for children aged 3–10 years,designed for use by 4 children at a time, with a product area of 0.5m x 3m (1.6ft x 9.8ft) and asafe play area of 1.5m x 4m (4.9ft x 13.1ft); see-saw lever made of 80NB galvanized pipe,2950mm in length, providing strong load-carrying capacity; seats made of LLDPE via rotationalmolding, sized 295x190x70mm, UV stabilized, food-grade, non-hazardous plastic with 5–8 mmthickness for durability and seamless construction; handle grips made from 20NB galvanizedpipe with end caps and compliant with EN 1176-1:2008 for hand grips; see-saw stand includesspecial Nylon-6 bush enclosed in a seamless pipe and hinged to a 50NB support pipe, with ISAbase for firm foundation; impact attenuators made from 20NB galvanized pipe; heavy-dutynylon bush-type bearings used for pivot; all pipes are hot dipped galvanized with GI thicknessof 60 microns; coated with 3-coat marine paint for corrosion resistance and powder coatedusing pure polyester material with a dry film thickness of 50–70 microns, tested by cross hatchcutter adhesion method; nuts and bolts are galvanized/S.S./Allen/Button Head types with nylonlock nuts and PVC bolt caps, and all pipe ends are sealed with GI or PVC caps for user safety;ISO 9001:2015 certified; available in multicolor options as per RAL shades; packed with triple layer safety packaging (EPE foam, HDPE film, and stretch wrap), etc. complete as approved bythe Engineer-in-Charge. |
| 52 | Supply, Finishing, and Installation of Classic Heavy-Duty Outdoor Bench with Cast Metal Frame and Treated Hardwood Slats. |
| 53 | Supply and installation of Brinjal Bin with a capacity of 84 litres, having a product diameter of0.3 m and an overall height of 0.7 m, designed in the shape of a brinjal for use in gardens, parksor public areas to accommodate both dry and wet waste, fabricated entirely from high-qualityFibre Reinforced Plastic (FRP) using the hand lay-up process considered best for FRPapplications; FRP thickness ranging from 3 mm to 5 mm depending on the product section, withhigh abrasion resistance and verified UTS (Ultimate Tensile Strength) testing; the productfeatures an opening at the brinjal\"s mouth for waste disposal, and its aesthetic design andstructure are intended to replicate the natural form of a real brinjal; manufactured usinginternational-grade gel coats mixed with UV-stabilized pigments to provide vibrant, long lasting color; ISO 9001:2015 certified; color as per image or approved sample; supplied withtriple-layer protective packaging including first layer of EPE foam, second layer of HDPE film,and third layer of stretch wrap, etc. complete as approved by the Engineer-in-Charge. |
| 54 | GYM EQUIPMENTS |
| 55 | Supply and installation of of Seated Outdoor Fitness Cycle Machine (Recumbent Style) with Hot-Dip Galvanization, Powder Coating, .Main Frame/Base in Seamless Steel Pipe, Moving Mechanism in High-grade MS Pipe All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 56 | Supply and installation of Dual-Seated pull chairs for shoulder excercise with Hot-Dip Galvanization, Powder Coating, .Main post in Seamless Steel Pipe,Arms & Seats Frame High-grade MS Pipe .All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 57 | Supply and installation of Dual-User Outdoor Leg Press Machine with Hot-Dip Galvanization, Powder Coating, .Main post in Seamless Steel Pipe,Leg Press Arms Frame High-grade MS Pipe .All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 58 | Supply and installation of Single-User Outdoor Air Walker / Sky Stepper Fitness Equipment with Hot-Dip Galvanization, Powder Coating, .Main post in Seamless Steel Pipe,Moving Pedals/Arms inHigh-grade MS Pipe .All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 59 | Supply and installation of Single-User Outdoor Single-User Outdoor Waist Twister Fitness Equipment with Hot-Dip Galvanization, Powder Coating, .Main post in Seamless Steel Pipe,Handlebars inHigh-grade MS Pipe .All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 60 | Supply and installation of street workout system with Hot-Dip Galvanization, Powder Coating, .Main post in Seamless Steel Pipe,Horizontal/Climbing Bars inHigh-grade MS Pipe .All steel components must be protected by Hot-Dip Galvanization conforming to ASTM A123 or equivalent, applied before any further coating. Must comply with relevant safety and quality standards for outdoor fitness equipment |
| 61 | LAND SCAPPING |
| 62 | Complete Supply and Installation of Park Landscape, Horticulture, and Site Furnishing Works as per the direction of site engineer in charge. |
| 63 | FOUNTAIN WORKS |
| 64 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 65 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) |
| 66 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;All works above plinth level upto floor V level Concrete of M25 grade withminimum cement content of 330 kg /cum |
| 67 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 68 | Centering and shuttering including strutting, propping etc. and removalof form Foundations, footings, bases of columns, etc. for massconcrete |
| 69 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage For vertical surface two coats @ 0.70 kg per sqm |
| 70 | Electrical |
| 71 | CABLING AND TERMINATION |
| 72 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm |
| 73 | Supply of one number PVC insulated and PVC sheathed armoured aluminum power cable of 1.1KV grade of the following sizes. 4 core 10 sq mm |
| 74 | Supplying and making end termination with brass compression\ gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(4x10;25sqmm) |
| 75 | Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm |
| 76 | Supply, installation, testing and commissioning of SMC FRP rectangular junction Box (200 x 140 x 95mm) of approved make with MCB rail suitable for providing connection for fixing single pole isolator as per the direction of Engineer in charge. (Make: Sintex) |
| 77 | Supplying, laying and jointing of the following sizes of double wall corrugated(DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanicalprotection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size |
| 78 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 25 sq mm |
| 79 | DB AND ACCESSORIES |
| 80 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door |
| 81 | Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \"\"C\"\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 82 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A |
| 83 | Supplying and fixing following rating, four pole, (three phaseand neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DBcomplete with connections, testing and commissioning etc. asrequired. 40 A |
| 84 | Supplying and fixing following rating, threepole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. asrequired. 40 A |
| 85 | EARTHING |
| 86 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement andwatering pipe etc.(but without charcoal/ coke and salt) as required |
| 87 | Supply and drawing bare earthing conductors of the following sizes along withwiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 88 | Supply and drawing bare earthing conductors of the following sizes along withwiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) |
| 89 | LIGHT FITTINGS |
| 90 | Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 91 | Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters |
| 92 | Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part IIIdouble arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters |
| 93 | Supply, installation, testing and commissioning of 20W LED Bollard fixture, with warm white light output, suitable for landscape lighting with IP 65 protection made of extruded aluminium housing and including all accessories as required for complete installation and making good any damages made during installation as instructed by engineer in charge. |
| 94 | Supply, installation, testing and commissioning of 40W LED gate ligtfixture, with warm white light output, with IP 65 protection made of extruded aluminium housing and including all accessories as required for complete installation and making good any damages made during installation as instructed by engineer in charge. |
| 95 | SITC of 8W LED Spike focus light fixture, polyester coated aluminum, housed in ground/ bush light, offers safe and vibrant parking areas, pathways and gardens, with high illumination and a soothing experience, suitable for landscape lighting with IP 65 protection made of extruded aluminum housing and including all accessories necessary as required to complete installation. |
| 96 | SITC of 60W Chandelierlight fixture, polyester coated aluminum,, with high illumination and a soothing experience,with IP 65 protection made of extruded aluminum housing and including all accessories necessary as required to complete installation. |
| 97 | FOUNTAIN |
| 98 | Nozzles and Jet Selection |
| 99 | Supplying, Installation, Testing and Commissioning of Nozzle made with gunmetal Grade Geyser jet 100mmı with adjustable nozzle for height adjustment of the fountain etc. Complete as required. |
| 100 | Supplying, Installation, Testing and Commissioning of Single Jet Crown Nozzles Complete with ball joint for 15 Degree pivoting made of brass with Nickle plating,flow straightner in following size .Height of water stream upto 10 mtrs. etc. complete as required. 40 mm internal threaded with 20 mm orifice. |
| 101 | Pumps and Filteration |
| 102 | Supplying, Installation, Testing and Commissioning of ISI Marked openwell submersible pump set contain with stainless steel shaft and cast iron/SS body, the pump shall be designed to prevent over loading and having dynamically balanced rotating parts etc. thepump capable of delivering following capacities discharge at suitable head and lowering the pumps in water bodies and suitable for operation on 415V(+-10%), 3-phase AC supply including providing required no\"s of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet including connection, interconnection ,supports etc. as required. suitable for 900LPM at 25 Mtrs Head etc. complete as required. |
| 103 | Supplying, Installation, Testing and Commissioning of fixing of Suction Screen stainer made of ABS to be fitted in suction to protect the pump from enrty of external materials etc. complete as required. |
| 104 | Supplying, Installation, Testing and Commissioning of 300x300 mm Dia Main Drain in SS 304 Gr with perforations to disallow foreign material with top openable for maintenance etc. complete as required. |
| 105 | Supplying, Installation, Testing and Commissioning of 400 mm Dia wide SS Overflow Skimmer in Stainless steel 304 gr with front openable fitted debris trapping mesh with outlet size of 65mm Dia for fixing in wall etc. Complete as reqd. |
| 106 | Valves and Controls |
| 107 | Supplying, Installation, Testing and Commissioning of fixing of following dia. Gun metal gate valve (Screwed type) on the existing pipeline, including testing & Commissioning etc. complete as required.- 80 mm dia |
| 108 | Supplying, Installation, Testing and Commissioning of fixing of following dia. Gun metal Horizontal Non Return valve ( screwed type ) on the existing pipeline, including testing & Commissioning etc. complete as required.-50 mm dia |
| 109 | Electrical and Lighting |
| 110 | Supplying, Installation, Testing and Commissioning of underwater Luminaries surface mounted RGB LED spot light 6 x 3W with IP 68 protection, SS/ aluminum dia casting body with power coated paint, soft rubber gasket along with 2 years free replacement guaranty etc. complete as required.. |
| 111 | Supplying, Installation, Testing and Commissioning of water proof (IP 68) power supply unit of not less than 200W i/c connection along with 2 years free replacement guaranty etc. complete as required. |
| 112 | Supplying, Installation, Testing and Commissioning of RGB controller with remote Kit wattage not less than 200 watt i/c connection along with 2 years free replacement guaranty etc. complete as required. |
| 113 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. |
