Tender For Provision Of Screen Wall On Boundary Wall Of Type-V Qtr No. 3 And Replacement Of Roof Sheet Of Shed Of Type-V Qtr No. 7 In Stc Location Under Ftr Hq Bsf Rajasthan., Jodhpur-Rajasthan
TDR : 54122104
Tender Notice
BOQ
3 Days Left
Jodhpur
Rajasthan
Tender For Provision Of Screen Wall On Boundary Wall Of Type-V Qtr No. 3 And Replacement Of Roof Sheet Of Shed Of Type-V Qtr No. 7 In Stc Location Under Ftr Hq Bsf Rajasthan.
Name of Work: Provision of screen wall on boundary wall of Type-V Qtr No. 3 and replacement of roof sheet of shed of Type-V Qtr No. 7 in STC location under FTR HQ BSF Rajasthan.
Sl. No.
Item Description
1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
2
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
3
Modified Estimated Cost after using correction Factor On DSR 2023 on account of GST@ 0.973on item No. 1 to 13
4
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated screws 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 1.5 mm thick.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
