|
| 1 | Routine maintenance, operation of 2 nos.booster pump sets, 25 KVA Diesel Generator set, Electrrical installation and street light etc.by deploying Skilled maintenance staff complete as per term & condition attached as reguired. |
| 2 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete i/c credit for dismantled material with connections, testing and commissioning etc. as required.i.)Single pole |
| 3 | Double Pole |
| 4 | Triple pole and neutral 63 Amp. |
| 5 | Supply of following XLPE insuleted , XLPE/PVC sheethedAlumimium contoter ,Armoured power cable of 1.1KV gradei/c testing etc and credit for dismantal material.a)2 x 10 Sq.mm. |
| 6 | b)4 x 25 Sq.mm |
| 7 | Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size on wall surface as required.a)Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 8 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. a)Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a)4 X 25 sq. mm |
| 10 | b)2 x 10 Sq.mm. |
| 11 | Repair ,maintenance & overhauling of existing pump sets up to 12.50HP, 3 phase,415 Volts A.C.,2900 rpmrating from authorised service providers including inspection, to and fro transportation, dismantling & reassembling, painting after replacement of motor rewinding kit ,replacement of any defective parts,i.e. EP impellars,bearing bush,pump shaft ,water seal,cable,cable seal ,coupling bush,ss screws,welding,testing etc.complete as required. |
| 12 | Supplying & fixing of MNX contractor L&T make suitable for motor p/set i/c connection etc. as reqd. |
| 13 | Supplying & fixing of relay L&T make suitable for motor p/set i/c connection etc. as reqd. |
| 14 | Supplying & fixing of timer L&T make suitable for motor p/set i/c connection etc. as reqd. |
| 15 | Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specifiedrating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housingComplete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc.as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim (LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )) |
| 16 | 22 watt |
| 17 | Supplying & fixing of Battery Exide make 12V, 90AHsuitable for 25KVA DG set including connections,testing and commissioning etc as required. |
| 18 | Repair and servicing of 25KVA ,415/440 V,DG set along with AMF/Control panel including providing & replacing following spares,testing,commisioning etc as required.i.)ValvolinePremium Genuine Oil 20 Liters CAN -1No.ii)Lub Oil Filter(06.436.01.0.00)-1 No.iii)Fuel Filter Element(03.922.42.0.00)-2 No.iv)Lock Left(06.594.97.0.00)-1 Nov.)Lock Right(06.598.05.0.00)-1 Novi)Pri Air Filter Element(F6.729.07.0.00)-1 No.vii)VALVOLINE COOLANT PREMIX 10 LITRE CAN(82.020.35.1.26)-1 No.viii)Hose clamp(F6.377.16.0.00)-4 No.ix) Fuel Pipe Set(01.691.01.0.00,02.691.02.0.00)-2 Nosx)Control relay-2 Nos |
