|
| 1 | TOTAL |
| 2 | DISMANTLING & DISASSEMBLING OF DIFFERENT PARTS OF THE HOISTING ARRANGEMENT OF DRAW SHUTTER ASSEMBLY OF SIZE 200MM(L) X900(W )X 25MM(T) LIKE SPINDLE,SHAFT, SHORT PIECE DRIVING WHEEL ,BUSH,BEARING,BEARINGHOUSING TOP AND BOTOM PLATES ,PEDESTALS STOOL NUTS & BOLTS ETC PART BY PART AS REQUIRED AND AS PER DIRECTION OF EIC. |
| 3 | DISMANTLING &LIFTING OF THE ENTIRE GATE SHUTTER OF SIZE 1200MM(L)X900(W)X25MM(T) WITH THE HELP OF CHAIN PULLEY,SLING ETC. PART BY PART AS REQUIRED AND AS PERDIRECTION OF THE EIC. |
| 4 | REPAIRING OF THE EXISTING EMBEDDED PART OF THE GATE ASSEMBLY OF SIZE 1200MM(L)X 900(W)X 25MM(T) THOROUGHLY AS REQUIRED TO REACH THE TRUE SHAPE AND AS PER DIRECTION OF THE EIC. |
| 5 | SUPPLY,DELIVERY,FITTING-FIXING,TESTING &COMMISSIONING OF 60MM O.D X 1500MM(L) SCREW STEM GEAR SHAFT AS PER SAMPLE VERTICALLY ON THE TOP CENTRE OF DRAW SHUTTER WITH PROPER ALINGMENT WITH M.S. HINGE, BRACKET ETC. AS REQUIRED AND AS PERDIRECTION OF THE E.I.C |
| 6 | SUPPLY,DELIVERY,FITTING-FIXING,TESTING &COMMISSIONING OF M.S. FABRICATED PEDESTAL STOOL INCLUDING FOUNDATION NUT,BOLTS ETC AS PER SAMPLE FOR MOUNTING OF VERTICAL HOIST UNIT ON THE CONCRETE FLOOR AND DOINIG PROPER ALIGNMENT AS PER DIRECTIONOF THE E.I.C |
| 7 | SUPPLY,DELIVERY,FITTING-FIXING,TESTING &COMMISSIONING OF M.S. FABRICATED HAND DRIVING WHEEL FOR SCREW SPINDLE OF SIZE 300MM DIA FITTED WITH INTERNALLY THREADED G.M. BUSH OF THE CENTRE HUB AS PER SAMPLE ON THE TOP OF THE MECHANICAL HOIST UNITAS REQUIRED AND AS PER DIRECTION OF THE E.I.C |
| 8 | SUPPLY,DELIVERY,FITTING-FIXING,TESTING &COMMISSIONING OF BEARING HOUSING ,HOUSING TOP & BOTTOM PLATES WITH REQUISITE BEARING AS PER SAMPLE AND PROPER ALINGMENT OF THE WHOLE ASSEMBLY FOR SMOOTH LIFTING ALONG WITH LOWERING OF DRAW INCLUDING NECESSARY NUT & BOLTS ETC AS PER DIRECTIONOF THE EIC . |
| 9 | Coating of \"Epoxy\" Resin of thickness not less than 160 micron with a lowviscosity,crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommendedproportion for use on metal,concrete and wood surface to protect from corrosion as well as damagefrom chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of ElC. [This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] |
| 10 | SUPPLY,DELIVERY,FITTING-FIXING,TESTING &COMMISSIONING OF GATE COMPONENTS OF DRAW SHUTTER AS PER SAMPLE AND DIRECTION OF THE EIC. REF Please Enable Macros to View BoQ information |
