|
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 2 | M&L for brick work with sub-class `B\" bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 3 | M&L for brick work with sub-class `B\" bricks (except bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 4 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 5 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 6 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Preparation of new plastered surfaces o wall and applying two coats of distemper oil emulsion including thin layer (1mm thick) of wall care putty and priming coat, complete all as specified and directed. |
| 8 | Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 15m height, complete all as specified and directed. |
| 9 | Preparation of newly plastered surfaces of wall sides and soffits of the beams, ceilings, fascias, parapets etc. and applying two coats of weather paint (Apex) over a coat of exterior primer on, colour and tint as directed in any pattern including scaffolding up to 15m height, complete all as specified and directed. |
| 10 | Preparation of old painted steel and iron surfaces of any description not otherwise described exc 10cm width or girth by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots of roof /CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc. and applying one coat of synthetic enamel paint including scaffolding up to 15m height, complete all as specified and directed. |
| 11 | Preparation of old or previously treated wooden surfaces of any description not otherwise described exc 10cm width or girth and applying one coat of synthetic enamel paint including scaffolding up to 15m height, complete all as specified and directed. |
| 12 | Complete removal of existing surface treatment from the old plastered surface of wall and applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer including scaffolding up to 15m height , complete all as specified and directed. |
| 13 | Preparation of old plastered / unplastered old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of exterior emulsion paint (weather coat) over a coat of exterior primer, including scaffolding up to 15m height, complete all as specified and directed. |
| 14 | Complete removal of existing surface treatment from the old plastered surface of wall and applyingtwo coats of cement base paint over primer including scaffolding up to 15m height, complete all as specified and directed. |
| 15 | Preparation of old plastered / unplastered decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of cement base paint including scaffolding up to 15m height, complete all as specified and directed. |
| 16 | S&F in repairs 20mm to 25mm thick second class softwood weather boarding, clean sawn, rebated on thick edge to give 20mm laps and fixed in eaves board etc upto 15m height, complete all as specified and directed. |
| 17 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat ofpink primer, complete all as specified and directed. |
| 18 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 19 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed. |
| 20 | All as per Ser item No 19.00 here in before but except Sheets. |
| 21 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed. |
| 22 | Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etcand applying two coats of synthetic enamel paint over one coat red oxide primer, complete all as specified and directed. |
| 23 | M&L for writing letters or figures including dashes etc (Block. Roman, Italic or Indian) n exc. 30cm high and width of the letter not less than 2.5mm,complete all as specified and directed. |
| 24 | Deduction to be made from BOQ for Schedule \"A\" Part-II (Credit Schedule from dismantling / taking down items) worth Rs 43,600.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) |
