|
| 1 | Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed. |
| 2 | M&L for 10 mm thick rendering in cement mortar 1:6 on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position complete all as specified and as directed. |
| 3 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position complete all as specified and as directed. |
| 4 | M&L for preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 4.65 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 8.35 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint colour approved by GE over a coat of primerincluding water curing before and after on painted surfaces of cement base paint and all scaffolding of any height of bldg complete all as specified and directed. |
| 6 | M & L for applying two coats of acrylic distemper (any tint)@ 8.35 sq.m/litre/2 coats by using roller to already wall putty prepared surfaces & including a coat of interior wall primer @ 10 sq.m/litre complete all as specified and directed. |
| 7 | M&L for applying 1.5mm thick cement wall care putty on wall/ceiling/RCC new or old surfaces of any description includding sanding and rubbing completeall as specified and as directed. |
| 8 | M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. |
| 9 | Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified and directed. |
| 10 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 11 | All as per item No 10above but exceptbricks. |
| 12 | S&F in repair MS Rat tail pattern/helical doors spring 250 mm, ordinary springs including roller and roller plate welding with MS chowkhats complete all as specified. |
| 13 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size paneand fixed all as specified incl hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed any height incl necessary sacfolding complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as spd and directed. |
| 15 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons, walls etc complete all as specified and as as directed. |
| 16 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 17 | All as per item No 16 above,but as in skirtingover 10mm thick backing coat in CM (1:4). |
| 18 | M & L Non - skid Ceramic colouredtiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, in floors /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match including screed bed 15mm thick in CM 1:6 etc complete all as directed. (Note : Work to be carried out in patches as required on site ). |
| 19 | All as per Sl item No18 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 20 | M & L Vitrified ceramic tiles 8 to 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 21 | Ditto all as per item No 20 above but in skirting over 10mm thickbacking coat in CM 1:4complete all as specified and directed |
| 22 | M&L for8 mm thick (square/rectangular) Vitrified ceramic tiles ( GVT )area of each tile exc 0.36 sqm but n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 23 | All as per Sl item No 22 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 24 | S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy heavy duty, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for joint free glazed ceramic colouredtiles in vertical surface of size 300X 600X 7mm / 300 x450x7 mmthick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. (Note : Work to be carried out in patches as required on site ). |
| 26 | M & L for joint free non skid ceramic coloured tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6or with chemical cement to match all as directed.(Note : Work to be carried out in patches as required on site ). |
| 27 | M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded glossy finish with coloured cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 28 | M&L for precast cement concrete interlocking tiles 60 mm thick Rouber moulded, prepolished with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 29 | M&L for precast cement concrete interlocking tiles 80 mm thick Rouber moulded prepolishedwith strength 40 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 30 | M&L for Granite Ist Quality Z black 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonework as insteps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. includingincluding cutting andpolishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 31 | M & L for Machine cut cudappa stone slab 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 32 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 33 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified . |
| 34 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified . |
| 35 | Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 25mm dia pipe complete all as specified . |
| 36 | S & F 20mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 37 | S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 38 | S&F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. |
| 39 | S & F in repairs 15 mm dia CP Stop valves/angle valve, cast copper alloy, screwed down, high pressure,fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 40 | S & F in repairs 15 mm dia CP bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 41 | S & F in repairs 15 mm dia CP Pillar taps, long braide cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered \"Hot\" or \" Cold\" with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified. |
| 42 | S&F in repairs CP Sink mixer with regular swinging spout ( wall mounted model ) 15mm dia, with connecting legs and wall flange completeall as specified. |
| 43 | S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. |
| 44 | S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. |
| 45 | S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 46 | S & F in repairbrass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 47 | S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. |
| 48 | S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. |
| 49 | S&F in rep vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. |
| 50 | S & F in repair75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 51 | S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified. |
| 52 | Dismantling water tanks any type ( RCC/PVC) incl disconnecting all connectionof capacity exc 250 & not exc 500 ltrs. |
| 53 | Dismantling water tanks any type ( RCC/PVC ) incl disconnecting all connections ofcapacity exc 500 & not exc 1000 ltrs. |
| 54 | Supply and fixing, hoisting PVC water storage tank of 1000 ltr capacity including Supplied and fixed 20mm diaPTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed includingtank nipple etc. |
| 55 | Supply and fixing, hoisting PVC water storage tank of 500 ltr capacity including Supplied and fixed 20 mm diaPTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed incl tank nipple etc. |
| 56 | S&F in repairsCentre hole basin mixer with Popup Waste System with 450 mm Long Braided Hoses fixed completeall as specified. |
| 57 | S&F in repair Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, sprinkler etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. |
| 58 | S&F in repair soap dish chromium plated and typefixed to plugswith CP brass screw fixed in repairs. |
| 59 | S & F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ballcomplete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified. |
| 60 | S&F in repair 15mm dia brass chromium plated Sink Mixer With Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 61 | S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixerwithout popup waste system with 450 mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 62 | S & F in repair for 15 mm bore, fancy type, Wall Mixer with provision for Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flangecomplete all as specified and as directed by Engr-in-Charge . |
| 63 | S & F in repairfloor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 64 | S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. |
| 65 | S&F looking mirrorof size (600x450) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial, plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by Engr-in-Charge |
| 66 | S&F Health faucet(ABS body mild steel chromium plated suitable for 15mm dia piewith 1.25m long flessible pipe & ABS hook including making connection and fixed in repairs complete all as specified and as directed.Make-Somany,Jaquar,Hindware,Cera |
| 67 | S&F in repairs CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flangecomplete and fixedcomplete all as specified and directed. |
| 68 | S & F in repair 15 mm bore, fancy type, chromium plated angle valve heavy duty , cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. |
| 69 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 70 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified. |
| 71 | Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified. |
| 72 | Dismantling unframed work of timber scantlings 40 sqcm and over in any section, in any position complete all as specified. |
| 73 | M & L forClean sawn 2 nd class hard wood in scantling as a post and rafter, purlins etc complete all as specified. |
| 74 | S & Ffor steel work intrusses/MS hollow /Angle etc including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified. |
| 75 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 76 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate completeall as specified and directed. |
| 77 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 78 | M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified. |
| 79 | M & L Two coats of synthetic enamel paint over priming with red oxide over preparation of new iron surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 80 | S&F in repairs spindle brass for 15 mm boreWall mixer/CP WHB mixer/CP Sink mixer /bib taps/angle vale etc including fitting complete of any pattern complete all as sps and directed. |
| 81 | Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified. |
| 82 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protectionfinished even and fair and laid in alternate bays complete all as specified and directed. |
| 83 | S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified. |
| 84 | S&F for 5 to 8 mm thickinterlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge incl dismantling of old unserviceable board any type . |
| 85 | S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed. |
| 86 | M&L for providing and fixing in repair Stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge. |
| 87 | S&F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle, aluminium snap on bidding for fixing of glass panes/partical board in frame. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. |
| 88 | M&L for 4.8 mm thick black tinted sheet glass, of any size etc in square in each pane complete all as specified and as directed. |
| 89 | S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. |
| 90 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m complete all as specified and directed. |
| 91 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl making good all disturbed portion complete all as specified and directed. |
| 92 | S&F powder coated aluminium sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including 4.00 mm thick black tinted sheet glass and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.20mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed. |
| 93 | S&F for powder coated aluminium ventilator shutters, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh 0.36mm nominal dia of wire andaverage width of aperature 1.20mm, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 94 | M & L for providing 12mm thick toughened glass openable door,sliding door, fixed glass and two leaf glass up to 11 feet High ,glass partition(2.1 pvb interlayer bondede between two glass piles using heat and pressure) including SS handle locking arrangement(glass to floor,glass to glass,glass to wall junctionsand as directed by Engr-in-charge incl eatching/frosting of glass ,SS jointing clip, fasteners, heavy dutyfloor spring,SS L type lock and fastener etclocking arrangement completeetc deemed to be included in quoted rates complete all as spd and directed. |
| 95 | S&F in repairs vitreous china rimless single piece WC of Size: 395X710X730 mm, Single Piece WC with UF Soft close Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings,VGS WHT 81853S300UF S trap of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified and directed. |
| 96 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, includingb replacement of 75mm PVC floor trap with grating, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, inclPCC 1:2:4 type B-1 ( 20 mm graded stone agg )40mm thick, and rendering again 15 mm thickin CM (1:4) mixed withWPC Conplast - 421, (Note:- Floor area shall be considered for measurement & payment purpose) complete all as specified and as directed. |
| 97 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap,of size75 mm bore PVC SWR and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed. |
| 98 | Providing and fixing factory made single extruded WPC (Wood polymer composite) solid decorative both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . |
| 99 | S & F Aluminium alloy, anodised,sliding door bolt 250 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd and directed. |
| 100 | S & F floor door stpper of aluminium alloy body and tongue anodised with hard drawn steel spring 140mm overaii length of cover plate complete all as specified. |
| 101 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and incl MS hold fast/ lugs/SS dash fasteners boltof required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 102 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and incl MS hold fast/ lugs/SS dash fasteners boltof required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 103 | S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified |
| 104 | S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 105 | S & F Aluminium handles, cast type, anodised handle 150 mmcomplete all as specified. |
| 106 | S & F Aluminium handles, cast type, anodised handle 100 mmcomplete all as specified. |
| 107 | S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified. |
| 108 | Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed. |
| 109 | M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 110 | M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 111 | M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 112 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixedas in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining ofprelim coloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any position complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan |
| 113 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness both side plain consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixedas in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining ofplaincoloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any positioncomplete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan |
| 114 | S&F Stainless steel Z type hinges 100 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. |
| 115 | S & F stainless steel L button for kitchen cabinet and cup board shelf and fixed with SS star headed screw complete all as spd and directed. |
| 116 | S & F in repair Door closer hydraulically regulated aluminium die cast body universal type suitable for 851 to 1000 mm in width and weight between 61 to 80 kg complete all as spd and directed. |
| 117 | S & F 30 mm continious ( piano) width of flap ( when open), hinges stainless steel complete all as spd and directed. |
| 118 | S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (with shas bars) divided into square with plain , chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. |
| 119 | S & F 125 mm long Hasp and staple safety type aluminium anodised with mildv steel hinge pin incl bolt to hinge plate and fixed with SS star screwe complete all as spd and directed. |
| 120 | M&L for preparation of new wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 121 | M & L for rolled mild steel work angle ironas in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 122 | Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed . |
| 123 | M&L in repair for Prelaminated particle board of 9mm thick, interior grade prelaminated both sides with decorative choice laminations with teak wood leaping fixed with screws as in cupboard shutters, bed room, kitchen, aluminium partition andinternal shelves complete all as specified. |
| 124 | S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed. |
| 125 | Taking down of PVC Pipes with fittings upto 75mm to 110mm dia/eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.,complete all as specified and as directed. |
| 126 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 127 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 128 | S&F PVC (SWR) bend any radius 110mmcomplete all as specified and directed. |
| 129 | S&F PVC (SWR) bend any radius 75mm complete all as specified and directed. |
| 130 | S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 131 | S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 132 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele |
| 133 | S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele |
| 134 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples to MS window with bolt and washer /or withwooden beading for wooden doors and windowcomplete all as specified and as directed. and directed. |
| 135 | S&F for 35mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 136 | S & F in repair 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. |
| 137 | M&L for pavement quality concrete (PQC) of flexural strength 40 Kg/sqcm in field using minimum 400 Kg of cement per cum as per design mix including formwork laying in alternate bays over 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm average laid over 10mm thick sand cusioningcomplete all as specified and as directed. |
| 138 | Finishing top concrete pavement with wire brush broomingwhile concrete is green complete all as specified and as directed. |
| 139 | M&L forming 20mm thick expansion joints filled with prefromed30mm bituminous filleras specified and shown on drgs. |
| 140 | M&L forming 6mm thick dummy joints filled with poly suphide or polyurethane joints sealent compound using mechanical means to a min depth of 8mmcomplete all as per manufacturers instructions. |
| 141 | Note: Amount of sch of credit of Rs.72180/-will be deducted from total amount of BOQ. |
