|
| 1 | Excavating in trenchs not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Cutting of vegetation, shrubs,bushes,brushwood & tree not exceeding 30 cm girth etc. and removal upto 50 mtrs from the starting point complete all as specified and as directed. |
| 3 | M&L cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 4 | M&L cement concrete cast-in-situ 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in copings including use and waste of formwork as required complete all as specified and as directed. |
| 5 | M&L brick work with sub class \"B\" bricks, class designation 100, straight or curved on plan exceeding 6 m in mean radius, built in cement mortar 1:4 including flush pointing in same mortar as the work proceeds complete all as specified and as directed. Note: Cost of bedding mortar layer shall deemed included in the quoted rate. |
| 6 | M&L brick work with sub class \"B\" bricks, class designation 100 , in half brick thick walls, straight or curved to any radius, built in cement mortar 1:4 including flush pointing in same mortar as the work proceeds complete all as specified and as directed. |
| 7 | Raking out joints/ pointing to masonry or brick-work in single detached joints for flashing, etc complete all as specified and as directed. |
| 8 | M&L for flush pointing in cement mortar 1:4 on brick work of drains etc complete all as specified and as directed. |
| 9 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. (inner girth shall be measured) complete all as specified and as directed. |
| 10 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto for providing fair finished drain channel for Ser item No 9 in here-in-before complete all as specified and as directed. |
| 11 | M&L PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed. |
| 12 | M&L RCC pipe 450mm bore class NP-3 laid and jointed complete with collars, laid in trenches, and tested complete all as specified and directed. |
| 13 | M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use and waste of formwork complete all as specified and as directed. |
| 14 | M&L 15mm thick rendering on fair surfaces of brick work or concrete surfaces, surfaces finished fair and even without using extra cement, in cement mortar (1:4) complete all as specified and as directed. |
| 15 | M&L preparation of new plastered or unplastered surface of walls and applying three coats of white wash complete all as specified. |
| 16 | M&L TMT bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and direceted. |
| 17 | M&L TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clipscomplete all as specified and as directed. |
| 18 | M&L Precast cement concrete1:2:4, type B1 (using 20 mm graded stone aggregate) set in cement mortar (1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 19 | S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes andfixed to walls complete all as specified and directed. |
| 20 | S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches complete all as specified and directed. |
| 21 | S&F 110 mm dia PVC (SWR) bends with access doors any radius complete all as specified and as directed. |
| 22 | S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed. |
| 23 | S&F in repairs stack clamps for 100 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 24 | Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 25 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm hard and dense soil complete all as specified and as directed. |
| 26 | M&L hard core of gauge not exceeding 63mm of broken bricks deposited spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 27 | M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filling, sub base of path complete all as specified and as directed. |
| 28 | Removal of excavation material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 29 | S&F Steel work in tabular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240 complete all as specified and as directed. |
| 30 | S&F Roof trusses (framed), trussed, purlins, crame gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections), including distance pieces, cleats etc complete all as specified and as directed. |
| 31 | S&F Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 32 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thickin ridges of an colour having tesile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 33 | M&L Glazed ceramic coloured (colour & shade as approved) tiles non-skid of size 400mmx400mm & 7mm thick as in floor set andjointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6)complete all as specified and as directed. |
| 34 | M&L Glazed ceramic coloured (colour & shade as approved) tiles of size 300mmx450mm & 7mm thick on vertical surface set and jointed in neat cement slurry over andincluding 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tile complete all as specified and as directed. |
| 35 | M&L 50 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases,floors and paving etc. complete all as specified and as directed. |
| 36 | M&L Hardcore of Broken broken bricks gauge not exceeding 63mm, deposited, spread & levelled in layers not exceeding 15 cm thick, watered & rammed to a true surface complete all as specified and as directed. |
| 37 | M&L 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 38 | M&L Machine pressed precast conctete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed. |
| 39 | M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use and waste of formwork complete all as specified and as directed. |
| 40 | S&F Vitreous china wash basin, white/ coloured, flat back, size 550mmx400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed. |
| 41 | S&F chromium plated fancy type 1-way angle cock with flange suitable for 15mm bore pipe complete all as specified and as directed. |
| 42 | S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sqcm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed. |
| 43 | S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and as directed. |
| 44 | S&F piller taps, chromium plated, screwed down, high pressure, with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and as directed. |
| 45 | S&F 600mmx450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified and as directed. |
| 46 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors ccomplete all as specified and as directed. |
| 47 | S&F Gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. |
| 48 | M&L preparing new steel surface andapplying two coats of synthetic enamel paint over a one coat of red oxide complete all as specified and as directed. |
| 49 | Returning, filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified & direcetd. |
| 50 | Removing excavated material exceeding 250m & not exceeding 500 mtrand deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
