|
| 1 | Supplying and fixing 36 watts recess type LED fitting of size 2\" x 2\" suitable for operation on 230volts, 50Hz, AC supply including providing interconnections, chain arrangement for hanging the fitting etc., making good the damages done to the false ceiling etc., as required. (Make: Crompton or SS Make) |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 3 | Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, \"C\" curve,miniaturecircuitbreakersuitableforinductiveloadof following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Any SS Make) |
| 4 | Supplying and fixing of 32Amps rating, double pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Any SS Make) |
| 5 | Supplying and fixing of 300mm width MS Angle iron tray for laying armored copper cables for lighting, power,and smoke detection system made of 35mm x 35mm x 5mm thick MS angle iron and providing centre support between angles with 2Nos of 25mm x 5mm thick MS flat with a gap of 6mm between two flats placed horizontally and welded to the angle to provide mechanical strength. The horizontal supports should be placed at an interval of not more than 500mm.The tray shall be suspended perpendicularly from the ceiling by using 2Nos 10mm dia MS Plain rod of not less than 1500mm long placed at an interval of not more than 1500mm with anchor fastners hook type / chipping in the ceiling. the other end of the down rod should be connected with nut,bolt, washers (flat and spring type) on top and bottom of the tray i/c cutting, welding, grinding and painting with two coats of red oxide and two coats of synthetic enamel paint and making good etc., as required. |
| 6 | supplying and fixing of MS box on the existing cable tray of size 100mm x 100mm x 60mm deep along with 5A 4way wago connector, suitable for operation on 230volts AC supply, including providing interconnections, including cutting welding painting the box with red oxide and approved colour paint etc., as required. |
| 7 | Supplying of following size of copper cable, FRLS PVC sheathed PVC insulated GI wire braided (flexible armouring) of 1.1kV grade suitable for operation on 230volts single phase AC supply of 50Hz, including laying on the cable on the existing cable tray, providing clamps, nuts and bolts, washers, cable tags where ever required etc., as required. a) 2 x 1.5 Sqmm (for light control/AFD) |
| 8 | b) 2 x 2.5 Sqmm (for power plugs) |
| 9 | Supplying and making end termination with brass compression gland and lugs for following size of PVC insulated and PVC sheathed/ armoured steel luminium conductor cable of 1.1 KV grade as required. a) 2 x 1.5 Sqmm |
| 10 | b) 2 x 2.5 Sqmm |
| 11 | Supplying and fixing of light duty Pedestal fan of size 16\" suitable for operation on 230Volts, 50Hz, AC supply etc., as required. (Make: Crompton or SS Make) |
| 12 | Supplying and fixing of light duty Wall Mounting fan of size 16\" suitable for operation on 230Volts, 50Hz, AC supply etc., as required. (Make: Crompton or SS Make) |
| 13 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A and 5/6 A modular switch, connections etc. as required. |
| 14 | Dismantling the existing old EI and Electrical cable in in existing switch room and Shifting to the location in the building premises as specified by the building incharge, handing over the same etc., as reqd. |
| 15 | Supply of (MINIMAX) CO2 type Fire extinguisher of 2 Kgs capacity made of manganese seamless tube high pressure steel cylinder, internal discharge tube with bend and horn, fitted with wheel type valve conforming to IS:-3224 with ISI mark with suspension wall bracket overall conforming to IS-2878 with ISI mark etc as required. |
| 16 | Supplying and fixing of 4\" 18/20W LED Fitting suitable for operation on 230V AC supply including interconnection, testing etc as reqd. (Make: Crompton or SS Make) |
| 17 | Supplying and laying of 3 core 1.5 sq mm PVC insulated copper conductor cable etc., as required. |
| 18 | Supplying and laying of 14 SWG DIA bare Copper Wire along with existing cable or earthing etc., as required. |
| 19 | Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, on surface / recess, complete with tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, including painting, earthing etc., as required.a) 8 Way SPN MCB DB (Double Door) |
| 20 | Supplying and fixing of 16 SWG MS sheet for Adopter box, including cutting, powder coating etc., as required. |
| 21 | Supplying and laying of 19 mm dia metal flexible pipe for cable protection etc., as required. |
