|
| 1 | Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) ( including compensation of earth.)(a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.) a) From Pvt. Land |
| 2 | Granular Sub Base with Coarse Graded Material (Table :- 400-2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Cl.401 (with an initial lead of 5KM) |
| 3 | Tack coatProviding and applying tack coat with bitumenemulsion using emulsion pressure distributorat the rate of 0.20 kg per sqm on the preparedbituminous/granular surface cleaned withmechanical broom.( Including cost of testingof materials at site and laboratory as directedby the deptt,) as per clause 503 of Ministry ofRoad Transport and Highways specifications for Road and Bridge works(Fifth Revesion) (II) With Bitumen emulsion CSS-1., (IS:8887-2004)(b) dry & hungry bituminous surface |
| 4 | Tack coatProviding and applying tack coat with bitumenemulsion using emulsion pressure distributorat the rate of 0.20 kg per sqm on the preparedbituminous/granular surface cleaned withmechanical broom.( Including cost of testingof materials at site and laboratory as directedby the deptt,) as per clause 503 of Ministry ofRoad Transport and Highways specifications for Road and Bridge works(Fifth Revesion) (II) With Bitumen emulsion CSS-1., (IS:8887-2004)(a) Normal bituminous surface |
| 5 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. ( including carriage up to initial lead of 5.0 KM from quarry and carriage of mixed materials up to 10.0 KM initial lead from mixing plant) ( Including cost of testing ofmaterials at site and laboratory as directedby the deptt.) \"(A) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) (I) with 60/70 or VG-3O gradebitumenii\" for GradingII(19 mm nominal size) |
| 6 | Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % o of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects) ( including carriage up to initial lead of 5.0 KM from quarry and carriage of mixed materials up to 10.0 KM initial lead from mixing plant) ( Including cost of testing of materials at site and laboratory as directedby the deptt.)a. With hydrated lime/cement as filler(ref er table 5OO-9 of MoRT&Hspecification).(II) with Polymer Modified bitumen 70 ii) for Grading-Il (13 mm nominal size) Note: DLP of 36 months is applicable for this item |
| 7 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the Mort&H specificationsNote: DLP of 36 months is applicable for this item |
| 8 | Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular.Note: DLP of 36 months is applicable for this item |
| 9 | Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 90 cm High OctagonNote: DLP of 36months is applicable for this item |
| 10 | \" Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 60cm circularNote: DLP of 36 months is applicable for this item |
| 11 | \" Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 90cm equilateral traingleNote: DLP of 36 months is applicable for this item |
| 12 | Direction and place identification sign upto 0.9sqm size board.Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) Chevron (50cm x 60 cm)Note: DLP of 36 months is applicable for this item |
| 13 | \" Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand: Hazard Marker (30cm x 90 cm)Note: DLP of 36 months is applicable for this item |
| 14 | Providing Linear Delineator System with Diamond grade reflective sheeting of size 80cmx10cm, fixing over thin gauge crimped aluminium sheeting with single colour panels of Yellow/Red/White and fixing to the object as per specification of the manufacturer.Note: DLP of 36 months is applicable for this item |
| 15 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’sfixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenanceNote: DLP of 36 months is applicable for this item |
| 16 | Repair of RCC Railing (Carrying out repair of RCC M30 railing to bring it to the original shape.)Note: DLP of 36 months is applicable for this item |
| 17 | Painting on concrete surface (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt,dust,oil,grease,efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) ForRCC RailingNote: DLP of 36 months is applicable for this item |
| 18 | Providing fitting and fixing of solar power operated automatic Traffic Blinker of 300 mm dia polycarbonate body UV- Stabiliser / Water clear Polycarbonate LENS, AMBER/RED colour, Ultra Bright LED Light source, Solar panel, 12V DC Power supply charge control unit ( Battery 12 V,48 Hr minimum back up) with safety casing ( 2mm thick metel box) etc. filtted with Traffic signal pole 75 mm dia MS ( 4 m above GL) fixed by means of properly designed foundation with M15 grade cement concrete 60 cm x 60 cm x 90 cm, 75 cm below ground level / as per approved design including painting as directed ( Excluding GST)Note: DLP of 36 months is applicable for this item |
| 19 | Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material. B ByMechanicalMeans(II)With Dewatering (i) Upto 3m depthNote: DLP of 36 months is applicable for this item |
| 20 | Plain/Reinforced cement concrete,in open foundation complete as per drawing and technical specification including steel shuttering formwork.Without plasticiserA. PCC Grade M15Note: DLP of 36 months is applicable for this item |
| 21 | Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification.(b) Random Rubble Masonry Note: DLP of 36 months is applicable for this item |
| 22 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.Note: DLP of 36 months is applicable for this item |
| 23 | Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification A)GranularMaterialNote: DLP of 36 months is applicable for this item |
| 24 | Single bamboo spur and palasiding of whole 1st class bamboo (Bholuka or Barua) 85mmto 100mm dia closely packed & driven , including fitting and fixing with half 2nd class bamboo (Jati or Bethua) horizantally in three rows with the cane or tieing wire complete and struts 1500 mm apart longitudinally and providing brush wood as per drawing and technical specification .A) \"Driven at least 900mm below and 1800 mm above the ground on average.Note: DLP of 36 months is applicable for this item |
| 25 | Providing and laying Sand filled cement bags in position at the eroded portion of road shoulder /enbankment slope/ bridge & culvert approaches etc. including collection and supply of sand and empty cement bags with all lead and lifts complete as directed by the Enginer-in-charge.Note: DLP of 36 months is applicable for this item |
