|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 2 | Supplying and drawing the following size FRLS of PVC insulated copper conductor single core cable in the existing surface /recessed steel/ PVC conduit as reqd. |
| 3 | 1 x 1.5 sqmm |
| 4 | 2 x 2.5 sqmm |
| 5 | 2 x 4 sqmm |
| 6 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor cable in the existingand earthing the point with 1.5 sqmm copper cable etc as reqd. at site Group C |
| 7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 8 | 5/6 amps switch |
| 9 | 3 pin 5/6 amp socket outlet |
| 10 | 15/16 amps switch |
| 11 | 6 pin 15/16 amp socket outlet |
| 12 | Supplying and fixingstepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 13 | S/F of following sizes of medium class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 14 | 25 mm |
| 15 | 20mm |
| 16 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 17 | UPTO 35 sq. mm |
| 18 | Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less Direct Currnet ( BLDC) Motor, class of insulation: B3 nos blades, 30 cm long down rod, 2 nos canopies, shackles kit, safety rope, copper winidng , Power factor, not less than 0.9 service value ( CM/M/W) minimum 6.00 , Air delivery minimum 219 Cum/min 350 RPM ( tolerance as per IS: 374-2019) , THD less than 10% remote of electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C ( max) insulation resistance more than 2 mega ohm, suitable for 230 volt 50 HZ single phase 415 volt AC supply , earthing etc complete as reqd. |
| 19 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 20 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 21 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 22 | 63 A |
| 23 | Supply, Installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 1xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100lm |
| 24 | S/F/T/C of pre-wiredof double box type fitting complete with Two no. LED tube of frosted cover design 1 watt 2100 lumens 50000 burning hours size 1200mm completeall accessories i/c directly on ceiling wall includingconnection with 1.5 sqmm FRLS PVC insulated copper conductor cable and earthing etc as reqd. fitting equivalent to philips make Cat no. TMC 502 2 x t -LED 22W, Tube equivalent to philips make Cat no. MAS tube 1200 mm 18W865 T81-2100 lm |
| 25 | Supply, Installation, testing and commissioning of pre-wired, wall mounted fancy white light, suitable for installation of LED bulb, 220-240 V, 50 Hzcomplete i/c all accessories but without bulb etc. including connection, etc. complete as required. Make Philips, Cat No. Cat No.Comet wall fancy light B22 or equivalent model of thorn/trilux |
| 26 | Supply, Installation, testing and commissioning of 15 inch heavy duty, AC single phase 230 Volt, 50 Hz, 1400 RPM, steel body exhaust fan in the existing opening, including, making good the damage, cable connection, etc. as required. |
| 27 | S/I/T/C of 150 watts flood light fitting 5700 K pressured dia cast housing with IP65 protection efficient high 220-240V output emitter LED for better distribution with dimension 447 X 163 x 327 mmand 6500 colour with lumens 15000 with all accessoires etc as etc as reqd. at site. ( model no BVP410 LED 150 CW HE NB FG S4 XTFCL) ( Philips ) |
| 28 | Supplying of one number PVC insulatedand PVC sheathed /XLPE aluminium armoured conductorpower cable confirming to1.1 KV grade of following size etc as reqd |
| 29 | 4 x16 sqmm |
| 30 | Supplying and fixing of street light pole box of size ( 250 x 200 x 100 ) complete with all accessories i/c suitable clamps, suitable bakelite sheet, brass screws , washers and 1 nos SPCMB 10 amps capacity i/c making connection etc as reqd. at site. |
| 31 | S/F LED70 watt street lightsfitting luminaire with pressure dia cast aluminium and heat resistance toughened flat glass complete with accessories top opening compartment with IP66 protection with 7200 lumens 220V-240Vi/c making connections etc reqd. ( model no. BRP409 LED CW 074 CW HE MR S1 PSU GR ) ( Philips) |
| 32 | Supplying, installation, testing and commissioning of one no. LED tube of frosted cover design, 18 watt2100 lm50000 burning hoursize 1200 mm in the existing single or double box type fitting complete as required. Tube equivalent to philips Make Cat no. MAS LED tube 1200 mm 18W 865 T81-2100lm |
| 33 | Supply Installation, testing and commissioning of pre wired 2\"x2\" recess mounted 36 watts LED fitting square shape, Commercial grade with luminaire with Thorn/Trilux ldiffuser complete with all accessories i/c connection with 1.5 sqmm FRLS PVC copper conductor Cable with mounting 4 nos cutch wire /G.. chain for mntino from true ceiling etc. as required. Make Philips, Model No. - FullGlow G6 Cat No. RC380B LED36S-6500 G6 L60W60 PSU OD S1 or equivalent model of Thorn/Trilux |
| 34 | S/I/T/C ofpre-wired 45 watt IP 65, Post top lantern light have symmetric light distribution, 220-240 V , 50 Hz complete i/c all accessories etc. directly on surface including connection with 1.5 sq. mm FRLS PVC insulated , copper condutor cable and eathing etc. as required . Make Philips Uniscape Model Cat No, BGP200 CW PSU GR CPC SPD or equivalent model Thorn/Trilux |
| 35 | Servicing / cleaning the panel/feeder pillar with air blower i/c rubbing the corrossion, painting the panel with two or more coat i/c dressing the cables etc. complete as reqd. |
| 36 | Supply, Installation, testing and commissioning of 18 inch heavy duty, AC single phase 230 Volt, 50 Hz, 1400 RPM, steel body exhaust fan in the existing opening, including, making good the damage, cable connection, etc. as required. |
| 37 | Supplying and Fixing of snap-on DLP trunking of size 105mmx50mm with cover and including accessories such as Flat angle, end ends, internal/external angle support etc. on the wall/surface complete all as rrequired. |
