|
| 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soils(Including mixed soils but excluding laterite or sandstone), including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering andramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). |
| 3 | Filling in foundation or plinth by fine sand in layers not exceeding 150mm as directed and consolidating the same by thoroughsaturation with water ramming complete including the cost of supply of sand. (Payment to be made om measurement of finishedquantity). |
| 4 | Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in theinterstics without rolling but including ramming. |
| 5 | Cost of stone boulder 150 mm size delivered ans stacked at site. |
| 6 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor.(a) 1:3:6 proportion(B) With N.B. Variety stone metal |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes. (Pakur Variety) |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straightincluding fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thickwooden shuttering as per decision & direction of Engineer-In-Charge. |
| 9 | Reinforcement for reinforced concreate work in all sorts of structures including ditribution bars, stirrups, binders, etc. initialstraightening and removal of loose rust (if necessary ), cutting to requisite length, hooking and bending to correct shape, placingin proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing anddirection.(a)For works in foundation, basement and upto roof of ground floor/ upto 4m. (Tor steel/ Mild steel) I. ( JSW / JSPL /SHYAM / SRMB / BMASL / ELCTROSTEEL / SSL.) |
| 10 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth. |
| 11 | 125 mm th Brick work with 1st class bricks in cement morter (1:4). |
| 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones(10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive &grout materials etc |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones(10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive &grout materials etc |
| 14 | M.S. or W.I. ornamental grill of approved design joints continuosly welded with M.S. or W.I. flats and bars of windows, railing etc.fitted & fixed with necessary screws and lugs in ground floor.(i)Grill weigheing above 10 kg/sqm. and upto 16 kg/sqm.In ground floor |
| 15 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rail sand side styles ofwell seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places bothwaysin order tomake thedoor of solidcore and internal lipping with Garjan or similar wood veneers using phenol formaldehyde asglue etc.complete, including fitting, fixing shutters in position but excluding the cost of hinges and otherfittings in ground floor. |
| 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screwsetc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Lengthlt. |
| 17 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. Ref. PWD Bldg. Sch. X 58mm. X 1.90mm) |
| 18 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b)250mm long. |
| 19 | Anodised aluminiumbarrel / tower / socket bolt (full covered) of approved manufactured fromextrudedsectionconforming toI.S. 204/74 fittedand fixed with cadmium plated screws: |
| 20 | Neat cement punning about 1.5 mm thick in wall dado, window sills floor drains etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 21 | Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding / stagging where necessary (Ground floor)[ Excluding cost of chipping over concrete surface ] (i) With 1:6 cement mortar(b) 20 mm thick plaster |
| 22 | Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding / stagging where necessary (Ground floor)[ Excluding cost of chipping over concrete surface ] (ii) With 1:4 cement mortar(b) 15 mm thick plaster |
| 23 | Plaster (to wall, floor, ceiling, etc.) with sand and cement morter ( including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding / stagging where necessary (Ground floor)[ Excluding cost of chipping over concrete surface ] (c ) 10mm thick ceiling, floor plaster with (1:4) |
| 24 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab withnecessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1)to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slabincluding supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil,shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removingspoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspectionpit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be donewith admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level ofSeptic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as perIS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. |
| 25 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding\"P\" or \"S\" trap (excluding cost of concrete for fixing |
| 26 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on75 mm X 75 mm X 75 mm wooden blocks complete. |
| 27 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 i) Single Socketed 3 Meter Length (a) 75 mm |
| 28 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (b) 110 mm |
| 29 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (ii) Double Socketed 3 Meter Length (a) 75 mm |
| 30 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (b) 110 mm |
| 31 | Supplying, fitting and fixing pillar cock of approved make. d) Polythene Piller Cock (EMCO / ATLAS orequivalent)(i) 15 mm |
| 32 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm woodenblocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia.,approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nutincluding mending good all damages and painting the brackets with two coats of approved paint. (i) 450mm x 300 mm size |
| 33 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity |
| 34 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming toI.S. specification with P.V.C. fittings complete,C.I. bracketsincluding twocoats of painting to bracket etc. |
| 35 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to matchwith GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint inany position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately) 25 mm |
| 36 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to matchwith GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint inany position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately) 25 mm |
| 37 | (B) Fittings (i) Plain Tee (a) 75 mm |
| 38 | (B) Fittings (a) 11 mm |
| 39 | (B) Fittings (i) DoorTee (a) 110 mm |
| 40 | (iii) Cross Tee (a) 75 mm |
| 41 | (iii) Cross Tee (b) 110 mm |
| 42 | iv) Vent Cowl (b) 110 mm |
| 43 | v) Bend 87.5 (a) 75 mm |
| 44 | v) Bend 87.5 (b) 110 mm |
| 45 | Labour for fitting and fixing U.P.V.C. pipes for above ground workincluding cost of jointing materials etc. fitting and fixing all necessaryspecials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry orconcrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work includingcutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centreline measurement of the total pipeline including specials (A) Above groud (a) 75 mm. |
| 46 | (A) Above groud (b) 110 mm.. |
| 47 | Add GST 18 % |
| 48 | Add 1 % Labour Cess Please Enable Macros to View BoQ information |
