Tender For Providing, Laying, Spreading And Compaction Of 75 Mm Thick Wet Mix Macadam (Wmm)Each In Two Layers Between Km 0.000 To Km 3.000,75 Mm Thick Dense Bituminous Macadam (Dbm) And40 Mm Thick Bituminous Concrete (Bc) For Surfacing Works Including Cle, Shimla-Himachal Pradesh
TDR : 54077418
Tender Notice
BOQ
40 Days Left
Shimla
Himachal Pradesh
Tender For Providing, Laying, Spreading And Compaction Of 75 Mm Thick Wet Mix Macadam (Wmm)Each In Two Layers Between Km 0.000 To Km 3.000,75 Mm Thick Dense Bituminous Macadam (Dbm) And40 Mm Thick Bituminous Concrete (Bc) For Surfacing Works Including Cle
NAME OF WORK :PROVIDING, LAYING, SPREADING AND COMPACTION OF 75 MM THICK WET MIX MACADAM (WMM)EACH IN TWO LAYERS BETWEEN KM 0.000 TO KM 3.000,75 MM THICK DENSE BITUMINOUS MACADAM (DBM) AND40 MM THICK BITUMINOUS CONCRETE (BC) FOR SURFACING WORKS INCLUDING CLEANING OF ROAD SURFACE APPLYING PRIME COAT AND TACK COAT AND ROAD MARKING BETWEEN KM 0.000 TO KM 2.500 ALL AS PER PARTICULAR SPECIFICATIONS/MORT&H SPECIFICATION (FIFTH REVISION) ON PONG OP HILL ROAD (KM 0.000 CONSIDERED AT PONG) UNDER 108 RCC/759 BRTF ROAD SECTOR OF PROJECT DEEPAK IN HIMACHAL PRADESH STATE
Sl. No.
Item Description
1
Altitude Between (Below 5101-5400 ) mtr
2
Providing, laying, spreading and compacting graded stone aggregate grading as per Table-400-13 and satisfying the physical reqmt as per Table No. 400-12 of MORT&H specifications for WMM specifications to a thickness of 75 mm (Each in Two layer), including premixing the material with water to OMC in mechanical mix (Pug Mill) laying in uniform layers in sub base/base course on a well prepared base and compacting with power vibratory roller to achieve the desired density including guarding. (WMM 75 MM ThickX 2 layer = 24927.84 Sqm)
3
Providing, laying and compaction of DBM 75 mm thick (compacted) over finished non bituminous layer/WMM layer with minimum 4.5% Bitumen (VG-10) content to total mix conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification.
4
Providing and applying primer coat on prepared WMM surface including cleaning of road surface and spraying bitumen emulsion (SS-1 grade) @ 7.50 Kg/10Sqm using bitumen pressure distributor conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification.
5
Providing, laying and compaction of BC 40 mm thick (Compacted) over finished Bituminous surface/DBM layer with minimum 5.4% Bitumen (VG-10) content to total weight of mixconforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification.
6
Providing and applying of tack coat on prepared Bituminous surface/WMM layer and DBM layer including cleaning of road surface and spraying bitumen emulsion (RS-1 grade) @ 2.50 Kg/10 Sqm using bitumen pressure distributor conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification.
7
Providing and laying of Road marking with thermoplastic paint 2.5 mm thick conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification and as directed by Engineer in Charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
