|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm each and removing from site as in Sch of credit, and removal of debris outside MOD land, complete all as specified and directed. |
| 2 | Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including installing suitable size fastener by drilling into RCC/Brick work to fix frame and similar work conforming to Fe-290 Grade E-165, complete all as specified and directed. |
| 3 | Material and labour for mild steel, plain, black sheet of 1.25mm thickness in wall cladding, steel gates and similar works, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. |
| 4 | Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc and removal of rubbish outside MOD land, complete all as specified and directed. |
| 5 | Brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified and directed. |
| 6 | Material and labour for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cementincluding taking down cement plaster, any description on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 7 | Material and Labour for preparing new plastered or unplastered wall surfaces for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, to match the existing surface of wall complete all as specified and as directed |
| 8 | Materials and Labour for black hollow steel Section for structural use, conforming to IS 4923:1997 (Reaffirmed 2009), designation CF, in roof trusses (framed ), trussed, purlins, posts, crane gantries, rails and fastening and heavy brackets framing (square or rectangular hollow sections), including distance pieces cleats etc. including installing suitable size fastener by drilling into RCC/Brick work to fix frame/truss, complete all as specified and directed. |
| 9 | Applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on steel surfaces, over 10cm width or girth, including preparation of surfaces, complete all as specified and directed. |
| 10 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa using as in roof covering/cladding to wall and fixed with self tapping screws as specified including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and removing to store, complete all as specified and as directed. |
| 11 | M & L for Cutting chases not exc 10 cm girth and depth as required for inserting galvalume aluminium zince coating corrugated steel into brick walls, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good to facing and pointing in CM 1:3 to ends or edges, complete all as specified and as directed. |
| 12 | Surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and as directed. |
| 13 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in any type of soil, complete all as specifiedand as directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specifiedand as directed. |
| 15 | Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50 m from the starting point, complete all as specifiedand as directed. |
| 16 | M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed/broken stone aggregate as in foundation, filling and mass concrete, complete all as specified and as directed. |
| 17 | Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and as directed. |
| 18 | M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement,all as specified and as directed. |
| 19 | M&L 10 mm thick cement plaster in cement mortar 1:6 on bricks or concrete surface and finished even and fair complete all as specified and as directed. |
| 20 | M&L Preparing new plastered surfaces of walls and applying two coats of white wash, complete all as specified and as directed. |
| 21 | M&L for Sand filling under floors or in foundations including watering, consolidation and rammingcomplete all as specified and as directed. |
| 22 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded aggregate as in sub base of floor/paving/ hardstanding complete all as specified and as directed. |
| 23 | M&L for 100 mm thick PCC (1:2:4) type B1 using 20 mm graded aggregate as in sub base of floor/paving/hardstanding complete all as specified and as directed. |
| 24 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 25 | M&L for colour Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 26 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick having tensile strength of 550 Mpaas in roof covering /cladding to wall,fixed with self tapping screws as specified and as directed. |
| 27 | Materials and Labour for black hollow steel Section for structural use, conforming to IS 4923:1997 (Reaffirmed 2009), designation CF, in roof trusses (framed ), trussed, purlins, posts, crane gantries, rails and fastening and heavy brackets framing (square or rectangular hollow sections), including distance pieces cleats etc., complete all as specified and directed. |
| 28 | S&F powder coated (colour as aproved by Engr-in- charge) anodised aluminium ventilator with fixed aluminium frame of size 50 x 40 x 1.98 mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head frosted glass and remaining portion to be louvered using 4mm thick pin head frosted glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified. (Ref CE(AF) Shillong Zone TD Drg No AF/TD/242/15(R) |
| 29 | S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete. |
| 30 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete. |
| 31 | S&F 125 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 32 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed. |
| 33 | S&F 125 mm long Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed. |
| 34 | S&F for 1000 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 35 | S&F Steel water tubing medium grade galvanised with all fittings laid in trenches, and wall complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15 mm, complete all as specified and directed. |
| 36 | Supply and fixGI pipes, \"medium grade\" 20 mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 37 | S&F Stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore,all as specified. |
| 38 | Supply and fixing 20mm Gun metal, globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 39 | M&L PVC connections 600 mm long, with PTMT nuts, suitable for Hot/cold water, complete all as specified and directed. |
| 40 | S & F bib taps cast copper alloy with crurch or butterfly handle, screwed down, escrewed for iron pipe or for brass ferrule and fixed 15mm dia, complete all as specified and directed. |
| 41 | Supply and Fixing for 15 mm bore Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed. |
| 42 | S&F Vitreous china wash hand basin white flat back of size 550 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands including CP waste coupling & waste pipe, complete all as specified and directed. |
| 43 | Supply and Fix, PVC collapsible waste pipe (31/32 x 800) mm all as pe Cat No.3272 of Make Prayag or equivalent model of Make Polytuff/Shakti, complete all as specified and directed. |
| 44 | S&F 600mm x450mm bevelled edge mirrior of selected quality glass, mounted on 6mm thick AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 45 | S&F brass chromuim plated Towel Rail 600mm long of 20mm dia with and including chromium plated brass screws, complete all as specified and directed. |
| 46 | Supply and Fixing 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 47 | Supply and Fixing 75mm dia PVC (SWR) bends any radius, complete all as specified and directed. |
| 48 | Supply and Fixing 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 49 | Supply and Fixing PVC (SWR) bend 110 mm bore of pipe, complete all as specified and as directed. |
| 50 | Supply and Fixing PVC (SWR) reducers 110 mm to 75mm bore of pipe, complete all as specified and as directed |
| 51 | Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 52 | Supply and FixingBrass chromium plated shower rose 125mm size, with arm swivel joints, including fixing to steel pipe or union, complete all as specified and directed |
| 53 | M&L Rolled mild steel in joist,channel,flat,angle,or tee sections,fixed independently, without connecting plates, etc.(cut to ordinary lengths), complete all as specified and as directed. |
| 54 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and as directed. |
| 55 | M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm, complete all as specified and directed. |
| 56 | M&L for anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed. |
| 57 | Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed. |
| 58 | Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc, complete all as specified and as directed |
| 59 | Material and labour of use and waste of formwork for foundations, foundation, beam, lintel for rough finished surfaces of concrete, complete all as specified and directed. |
| 60 | Material and labour for RCC Nominal mix Type B1 1:2:4 (20mm graded aggregate) as in beam, cantilever, lintel etc, complete all as specified and as directed. |
| 61 | Supply and Fix, vitreous China wash down closet pan and trap EWC type, white, with plastic seat cover including connection to drain(or outgoing pipes ) and to flushing pipe,antisyphonage pipe ,fixing bolt etc and making good damaged portion complete all as specified and directed. |
| 62 | S&F health faucets (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 63 | S&F water closet vitreous china squalting pan orissa pattern with \"P\" or \"S\" trap size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe). |
| 64 | S&FPVC valveless syphnic action type low levelflushing cistern of10 ltrs white, with inlet, ball valve, float valve, float and handle including brackets all as specified |
| 65 | Supply and Fix flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern, complete all as specified and directed. |
| 66 | Supply and Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 67 | Supply and Fixing in new PVC (SWR) vent cowl 75mm bore |
| 68 | Supply and fixing PVC 110 mm dia (SWR) junctioin single with door access (single T) equal or unequal complete all as specified and as directed. |
| 69 | Surface excavation in any type of soil n.exc. 30 cm deep averaging 15 cm deep, removal from site upto distance exceeding 50 mtr and n.exc. 100 mtr, complete all as specified and directed. |
| 70 | Excavation in trenches not exc 1.5 m in deep and n exc 1.5 m wide for laying of drain pipes, pipe line, fdn for manhole like n exc 10 sqm plan and n exc 1.5 m in depth or as in soft/loose soil getting out, complete all as specified and as directed. |
| 71 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil, complete as specified and directed. |
| 72 | M&L PCC 1: 3: 6 , type C-2 (using 40mm graded stone aggregate) as in Foundation,grease trap walls , filling & mass concrete as specified and directed. |
| 73 | M&L RCC B1 (1:2:4) with 20 mm graded aggregate, in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed as specified and directed. |
| 74 | M&L RCC precast B1 (1:2:4) with 20 mm graded aggregate , but in landings, cover slabs (for man holes etc.)chullah hoods,chajjas, water troughs, mangers, shelvesand similar articles with plain faces including fixing in CM (1:4) complete all as specified and directed. |
| 75 | S&F for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as directed. |
| 76 | S&F for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 77 | M&L for brick work with sub class B bricks (Old size brick) staright or curved on plan exc 6mtr mean radius built in cement mortar, 1:4 all as specified and directed |
| 78 | M&L for neat Finishing cement concrete surface even and smooth with extra cement complete all as specified and directed. |
| 79 | M&L for 150 mm internal dia Class SN-8ISI Marked(IS 15328)DWCPE) pipes for use in underground drainage and sewarage system with elastomaric sealing ring joints, laid in trenches and jointed and testedwith & Including demoliton of old SGSW/RCC/CI pipe complete all as specified and as directed |
| 80 | M&L for PCC type C2 (1:3:6) for concrete bed to drain pipes for 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested. |
| 81 | M&L for 200 mm internal dia Class SN-8ISI Marked(IS 15328) DWCPE pipes for use in underground drainage and sewarage systemwith elastomaric sealing ring joints, laid in trenches and jointed and testedwith & Including demoliton of old SGSW/RCC/CI pipe complete all as specified and as directed |
| 82 | M&L for PCC type C2 (1:3:6) for concrete bed to drain pipes for 200 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested,. |
| 83 | S&F 75 mm dia PVC (SWR) pipes single socketed ,in any length with rubber ring joints jointed with solvent, fixed to walls etcincluding taking down oldSewage pipes/rainwater pipes and fittings, complete all as specified and directed. |
| 84 | S&F for 75 mm dia PVC (SWR) bend with oval access door, complete all as specified and directed. |
| 85 | S & F in110mm dia PVC (SWR) bends any radius with oval access door, complete all as specified and as directed. |
| 86 | S&F for 75 mm dia PVC (SWR) junction (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 87 | Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent ,including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc,complete all as specified and directed. |
| 88 | Materials and Labour for point wiring with 4.00 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 4.00 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15/16 Amps socket outlet independent,including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc,complete all as specified and directed |
| 89 | Supply and Fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed. |
| 90 | Supply and Fix flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth, complete all as specified and directed. |
| 91 | Supply and Fixing LED light fitting 1x18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.,complete all as specified and directed. |
| 92 | Supply and Fix, 100 mm dia., cast aluminium body LM6, flame proof, weather proof junction box 4 way terminal with 4 number of 3/4 ET cable entry, protection type Ex-D, Zone 1 & Zone 2, IP-55, Gas Group IIB, Temp Class T6, complete all as specified and directed. |
| 93 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,including taking down carefully existing copper/ aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including Steel Conduit with fittings etc, removing old materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed. |
| 94 | Materials and Labour for four single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire oftwo single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,including taking down carefully existing copper/ aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including Steel Conduit with fittings etc, removing old materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed. |
| 95 | Supply and Fix, flame proof, weather proof enclosure for MCB Distribution BoardSingle Phase and Neutral, 6 Way with incoming & outgoing terminals chamber, bus bar chamber comprising of 02(Two) Nos. copper bus bars of suitable rating, separate MCB chambers suitable for accommodating 05 (Five) Nos. one number incoming MCB 2P 32A and four number outgoing MCB single pole 6/10Amp \"C\" curve,enclosure made of cast aluminium alloy LM6, weather proof IP65, finished inside and outside with light grey epoxy powder coating, including cable glands, terminals, hardware and mounting arrangement all as per enclosure size 300x300x190mm), complete all as specified and directed. |
| 96 | Materials and labour for concealed point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLSH copper conductor cable 1100 volts grade, single core,drawn through and including PVC concealed conduit (medium grade) not less than 20mm size complete with all fittings and accessories suitable for one light / one exhaust fan point controlled by one switch including unsheathed single core stranded copper cable of size 1.5 Sqmm as earth continuity conductor connected to common earth and earty dolly and to be terminated to sunken/pressed flush box readily available covered with outer plates/inner plates etc as per site requirement for mounting switches ,socket, etc including testing on completion complete all as specified and as directed. Notes - Cost of metal flush box and cover plate shall be inclusive of quoted rated. |
| 97 | All as per serial item No. 1 here-in-before but for one 3 pin 5 amps switch socket outlet on independent board. |
| 98 | All as per serial item No.1 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board. |
| 99 | Supply and fix switch piano, flush button single pole one way 5 Amp complete all as specified and as directed. |
| 100 | Material and labour ceiling rose, surface bakelite, 65mm x 50mmthree terminals complete all as specified and as directed. |
| 101 | Supply and fix switch socket combination 2 in 1, 3 pin 5Amp flush type universal complete all as specified and as directed. |
| 102 | Supply and fix switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and as directed. |
| 103 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 104 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 105 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. |
| 106 | Supply and Fix Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings, complete all as specified and directed. |
| 107 | Supply and fix retrofit type LED Bulb 10/12W, complete all as specified and directed. |
| 108 | Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. |
| 109 | Supply and fix miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA,\"C\" curve, 6 to 32 Amps complete all as specified and directed. |
| 110 | Supply and fix miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA,\"C\" curve, 6 to 32 Amps complete all as specified and directed. |
| 111 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVCconduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring including Conduit fittings etc and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. |
| 112 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified. |
| 113 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V complete all as specified. |
| 114 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and directed. |
| 115 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. |
| 116 | M&L brick sub class B locally available best quality laid flat adjoining each other in trenches above sand cushioning for cable protection, complete all as specified and directed. |
| 117 | Supply and fix Galvanised Iron pipe 40mm bore (dia) \"Light Grade\" for protection of UG cable, laid in floors/Road crossing, fixing to pole with mild steel clamps, Nuts, Bolts, etc, complete all as specified. |
| 118 | M&L for cutting the road/hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 20 graded stone aggregate for the fixing the pipe complete all as specified. |
| 119 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of dia 25mm complete all as specified. |
| 120 | Supply and fix for 25 mm bore galvanised steel tubing \"medium grade\" (IS-1239) with all fittings, fixed to walls and ceilings or laid in floors and connections complete all as specified and as directed. |
| 121 | Supply and fix 25mm dia Gun Metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 122 | S&F Geyser 240 volt 2 KW, AC 25 Ltrs capacity BEE 5 star rated with ABS body PUP insulation standing loss in Kwh/24 h/45*C 0.465 Kwh with power input 2000 W voltage supply 230 v, 1 phase, 50 Hz, AC incoloy 800 glass coated heating element, Feroglas dry powder coating cold rolled MS water Tank with Hot and Cold connection pipe and complete installation accessories all as specified. Make: Bajaj/Venus/Crompton/Havells/Usha |
| 123 | Supply and fix Bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule compleete all as specified and directed. |
| 124 | Supply and fix angle stop cock (wall mount)CP high pressure with capstan head long shank screwed down 15mm dia bore complete all as specifed and directed. |
| 125 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
