|
| 1 | Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and as directed. |
| 2 | M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement and as directed |
| 3 | M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & faircomplete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for 5mm thick rendering in cement morter 1:3on ceiling, finished even & faircomplete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering and as directed |
| 7 | M&L preparation of new plastered surfaces of ceiling any description and applying three coats of white wash and as directed |
| 8 | M&L preparation of old decoratedwall surfaces of any description and applying one coat of oil emulsion distemper all as directed by Engg in Charge. |
| 9 | M&L for Preparation of old decorated surfacesof walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scrapingcompletely and applying two coat of oil emulsion distemper (OBD)over two coat wall care putty to make smooth, complete all as specified and directed by Engr-in-Charge.(Note : Work to be carried outfrom ground floor to fourth floor ofbldg height) |
| 10 | M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth andapplying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of oldpainted steelsurfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for preparation of old decorated surfaces of wall , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of white wash , complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for preparation of old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying three coat of white wash , complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L for preparation of old surfaces by complete removal of existing treatment of painted wall/ceiling incl pillar etc.and applying two or more coats of 100% Premium acrylic emulsion (weather proof) paint having VOC less than 100 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete,all as specified and as directed by Engr-in-Charge.(Note : Work to be carried outfrom ground floor to fourth floor ofbldg height) |
| 15 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) and as directed |
| 16 | M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement and as directed |
| 17 | M&L for Non - skid Ceramic tiles coloured tile7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including scread bed or bedding layer15mm thick in CM 1:6 all as specified. |
| 18 | M&L for vetrified ceramic coloured tiles light shade9 to 10 mm thick area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm) and as directed |
| 19 | M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.36 sqm in Skirting/dado including 10mm thick CM (1:4) backing coat complete all as specified and directed. |
| 20 | M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding .11Sqm but n.exc .38Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:6. |
| 21 | M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint freein dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc. |
| 22 | Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed |
| 23 | Ditto- all as per item No 22 above but exc 1.5 sqm and n exc 4 sqm each and as directed |
| 24 | M&L for powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 25 | M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 26 | Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 27 | S&F in repair aluminium die cast body door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed approved by Engr-in-Charge |
| 28 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge |
| 29 | Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) and as directed |
| 30 | Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap) and as directed |
| 31 | S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion all as directed by Engg-in-Charge |
| 32 | -Ditto- All as peritem No. 31above but 1000 ltr capacity and as directed |
| 33 | S&F in repair fancy type CP bib taps 15 mm dia of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and as directed |
| 34 | S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without\"Hot\" & \"Cold\" with long screwed shanks and fly nuts, screwed and as directed |
| 35 | S&F in repair WHB mixer 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without\"Hot\" & \"Cold\" with long screwed shanks and fly nuts, screwed and as directed |
| 36 | S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and as directed |
| 37 | Ditto- all as per item No 36 above but 20 mm dia. |
| 38 | S&Fin repairvitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with integral foot rest and making good to the floor completeand as directed |
| 39 | S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete and as directed |
| 40 | S&Fin repairs, counter top vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling CP brass 32mm dia with long screwed shanks & fly nuts & fancy type CP pillar tap complete all as apecified. |
| 41 | S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete. And all as directed |
| 42 | S&F in repairs Vitreous china urinals with urinal spreader, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal and all as directed back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union fordischarge pipe. (Exclusive offixing supply pipe to flushingcistern, trap and waste pipe)etc. |
| 43 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, with chromium plated brass screws and cup washers and all as directed |
| 44 | S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other endand all as directed |
| 45 | S&F in repairPVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed in repairs and all as directed |
| 46 | S&Fin repair CP grating(with & without hole) for Nahani trap and floor trap of size 100 mm dia fixed in repairs and all as directed |
| 47 | Cutting chases for concealed water tubing etc and making good in CM cutting exc 10 cm but not exc 20 cm girth in stone, concrete block or slab walls and all as directed |
| 48 | S&F in repairSwivel shower rose with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs and all as directed |
| 49 | S&Fin repair PVC ballvalve 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and all as directed |
| 50 | --Ditto-- as in item No. 49 abovebut 20mm dia |
| 51 | S & Fin repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover and as directed |
| 52 | S & Fin repair Vitreous china one piece wash down water closet pan (EWC)with necessary P/S Trap and fittings complete all as specified and directed. |
| 53 | S & Fin repair CP brass Towel rail 20mm dia, D type, 60 cm long complete fixed in wall with screws in repairs and as directed |
| 54 | S&Fin repairs CP soap dish, any type, fixed to plugs with chromium plated and as directedbrass screws |
| 55 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws andwooden/plastic cleats (Minimum weight 300gms) |
| 56 | S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws |
| 57 | S&F in repair PVC acrylic shelf for WHB 450 mm long |
| 58 | S&F in repairPVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete and as directed |
| 59 | S&F in repair bathroom mirror cabinet, all as directed by Engg-in- Charge |
| 60 | S&F in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for15mm dia bore and as directed |
| 61 | S&Fin repair two way angle valve for fixing in 15mm dia bore all as specified and directed. |
| 62 | S&F in repairHealth Faucet for EWC all as specified and directed . |
| 63 | Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :- |
| 64 | (a)15 mm bore |
| 65 | (b)20 mm bore |
| 66 | S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :- |
| 67 | (a)15 mm bore |
| 68 | (b)20 mm bore |
| 69 | Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :- |
| 70 | (a)15 mm bore |
| 71 | (b)20 mm bore |
| 72 | S&Fin repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 73 | Hacking out old broken glass of any thickness size,quality or description from any type of framesand S&F 3mm thick sheet glazingin square n.exc 0.5 sqmordinary quality with glazing clips and oil putty complete as directed by EIC. |
| 74 | Demoiliton of stone slabs and tiles of any description or thickness in foors, aprons etc |
| 75 | M&L Granite (of any type) tile 16 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid on complete all as directed by Engr-in-charge |
| 76 | M&L Granite (of any type) tile 16 to 20mm thick machine cut,in skirting/dado laid over cement screed bed and jointed with cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-charge |
