|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., completeall as specified and as directed. |
| 2 | Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed. |
| 3 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screwscomplete all as specified and as directed. |
| 4 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specifiedcomplete all as specified and as directed. Note:To be executed for provision of ridges and hips. |
| 5 | S & F4mm thick Non asbestosfibre cement building boards with Anodised aluminium snap grid frame work for false ceiling, flat or sloping fixed or laid/ inserted to timber/GI/Aluminium framework with screws including dismantling of old ceiling of any description complete all as specified and as directed. |
| 6 | S&FSolid PVC Wall Lining consisting of 5mm thickPlain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame work as per specifications and drawing including dismantling of old ceiling of any description complete all as specified and as directed. |
| 7 | S&F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 8 | Demolition ofplain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 9 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 10 | M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 11 | M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 12 | M&L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough, lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, etc. including necessary formwork (straight or curved) complete all as specified and as directed. |
| 13 | M & L for 25mm thick PCC 1:2:4, type B0 using (12.5 mm graded crushed stone aggregate) as in floors to receive tiles complete all as specified and as directed. |
| 14 | M&L for 40mm thick PCC 1:2:4,type B1 (using 20mm graded crushed stone aggregate) as in floor, finished the surface even and smooth with using extra cement complete all as specified and as directed. |
| 15 | M & L for3mm thick glass dividing strip 38 mm wide inserted in position as in floor complete all as specified and as directed. |
| 16 | Demolition of brick or stone masonry work built in cement mortarincluding all quoins, arches, pillars etc complete all as specified and as directed. |
| 17 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 18 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 19 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 20 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thickmixed with water proofing compound @ 100Mlper bag(50Kg) of cement or as per manufacture\"s instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note :Water proofing compoundwill be measured and paid separately as \"Supply only\". |
| 22 | M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 24 | M & L for preparation of newly plastered or old decorated wall surface and applying 1.5mm thick (Average) wall care putty complete all as specified and as directed. |
| 25 | M & L for preparation of newly plastered surfaces of wallsand applying one coat of alkali resistant primer over a coat of 1.5 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distempercomplete all specified and as directed |
| 26 | M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distempercomplete all as specified and as directed. |
| 27 | M & L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed. |
| 28 | M&L for preparation of newly plastered surfaces ofceiling and applying two coats of oil bound distemper over a coat of alkali resistant cement primar complete all as specified and as directed. |
| 29 | M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distempercomplete all as specified and as directed. |
| 30 | M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 31 | M & L for preparation of newly plaster surfaces of wall and applying two coats of exterior weather coat paint over a coat of primer complete all as specified and as directed. |
| 32 | M & L for preparation of old plaster surfaces of wall and applying One coat of exterior weather coat paint incl preparation complete all as specified and as directed. |
| 33 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed. |
| 35 | S&F for Virified Ceramic light shade coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 36 | S&F for Virified Ceramic light shade coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 37 | M & L for colourednon-skidceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc.over and including 15 mm thick screed bedin cement motar 1:4, setand jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles,complete all as specified and as directed. |
| 38 | M&L for coloured non skid ceramictiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with colouredtilesover and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 39 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 40 | M&L for glazed light coloured/printed ceramic tiles 350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thickrenderingincement mortar 1:4 complete all as specified and as directed. |
| 41 | Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed. |
| 42 | M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed. |
| 43 | M&L for Machine cut Kota stone slab 20-25 mm thick in verticle surface such as riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over10 mm thick rendering in CM (1:3)including rubbing and polishing complete all as specified and as directed. |
| 44 | S&F for 20mm thick Granite (of any type) work (table rubbed and polished)for wall lining (veneering towall) 12mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed in cement mortar (1:3) including rubbing and polishing complete all as specified and as directed. |
| 45 | M & L for green marble work 18mm to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 10 mm thick rendering in cement mortar (1:3) including rubbing and polishing complete all as specified and as directed. |
| 46 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqmeach (without taking off shutters from frame) complete all as specified anddirected. |
| 47 | Taking down chowkats orframe with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed. |
| 48 | Taking down shutter of any descriptionarea exc 1 sqm but n exc 2 Sqm each including builders hardwarecomplete all as specified and as directed. |
| 49 | Taking down shutter of any descriptionarea n.exc 1 sqmeach including builders hardware complete all as specified and as directed. |
| 50 | Taking down shutter of any description exc 1 Sqm n exc 2 Sqm each and refixing in the same opening after necessary repaircomplete all as specified and as directed. |
| 51 | M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints complete all as specified and as directed. |
| 52 | M&L formild steel flat iron in bands, straps, supports or stays for pintle hinge, hand made sliding bolts, hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 53 | S&F factory made solid PVC door frameof size 40mm x 47mm made out of 5 mm thickplain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 54 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 55 | S & F Factory made fully glazed (frosted/ground/obscured)/fully gauged PVC window/ventilator shutter 30mm thick(Style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail(rate including glass panes/gauges) complete all as specified and as directed. |
| 56 | S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 57 | S&F 35mm thick 2nd class hard wood plain framed paneled shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board exterior grade medium density fitted to chowkats or frames complete all as specified and as directed. |
| 58 | S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etcwith plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified anddirected. |
| 59 | S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etcwith plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed. |
| 60 | M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 61 | M&Lfor preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 62 | S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 63 | S & F 75 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 64 | S & F 50 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 65 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 66 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 67 | S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 68 | S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 69 | S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 70 | S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles n exc 200 cu. cm eachcomplete all as specified and as directed. |
| 71 | S&F in repairs, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed. |
| 72 | S & F in repairs, aluminium door closer (extruded section)bodyhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed. |
| 73 | S&FPowder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 74 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 75 | S & F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. |
| 76 | S & F in repairs, 20mm dia anodised aluminium tubular curtain rod including brackets,stops, rollerscomplete all as specified and as directed. |
| 77 | S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 78 | S & F in repairs, stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 79 | Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 80 | S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 81 | S & F 3mm thick figured glass, pinhead type in squares n exc 0.5 sq. m each pane complete all as specified and as directed. |
| 82 | S & F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 83 | S & F 12mm thick toughened glass door fixed with steel connectors, top and bottom pivots, 02 nos, 450mm long stainless steel handles, stainless steel hinges as required with locking arrangements including dismantling of old door complete all as specified and as directed. |
| 84 | S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 85 | M&L for prelaminated particle board 9mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work or cup board shutter complete all as specified and as directed. |
| 86 | S & F HDHMR Board 18/19mm thick, both side laminated any colour, as in shutter, vertical support and horizontal shelfs with necessary fitting including dismantling of old board of any description complete all as specified and as directed. |
| 87 | S&F Continous piano type hinges mild steel bright finish or electro galvanised , size of flaps (when open) 30 mm complete all as specified and as directed. |
| 88 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n.exc 500 litre capacity, etc complete all as specified and as directed. |
| 89 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n.exc 1000 litre capacity, etc complete all as specified and as directed. |
| 90 | S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed. |
| 91 | Taking up or down 15 mm bore GI water tubing and connections including cleaning for re-fixing to storecomplete all as specified and as directed. |
| 92 | S & F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 93 | Refixing only old serviceable15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubingincluding provision of new fittingsin new or old position to walls,ceiling, flooring etc. complete all as specified and as directed. |
| 94 | Taking up or down 20 mm bore GI water tubing and connections including cleaning for re-fixing to storecomplete all as specified and as directed. |
| 95 | S & F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 96 | Refixing only old serviceable20 mm bore Steel tubing and connections as obtained from taking up/down old steel tubingincluding provision of new fittingsin new or old position to walls,ceiling, flooring etc. complete all as specified and as directed. |
| 97 | S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 98 | S&F in repairs,15 mm bore, PTMT bib taps, standard, any colour, high pressure, screwed down for iron pipe and fixed (minimum weight 90 gram) complete all as specified and as directed. |
| 99 | S&F in repairs,stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe. |
| 100 | S &F in repairs, 15mm bore wall mixture with hand shower arrangement and connecting legs, wall flanges & wall brackets for hand shower complete all as specified and as directed. |
| 101 | S&F in repairs, 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore steel tubing all as specified and as directed. |
| 102 | S&F in repairs, fancy type Brass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and as directed. |
| 103 | S & F in repairs, toilet paper holderchromium plated fixed to wall with chromium platedBrass screw complete all as specified and as directed.Make : Prayag, Cat No BA-08 or equivalent in or equivalent in Jaquar / Hindware/parryware |
| 104 | S&F in repairs, health faucet fixed to EWC with 1m long easy flexible tube of 8mm dia and wall hook complete all as specified and as directed. |
| 105 | S & F in repairs,glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed |
| 106 | S & F in repairs,600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 107 | S & F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 108 | S & F in repairs, vitreous china, wash hand basin, white, flat back size 580 mm x 450 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium platedsuitable for wash hand basins, with long screwed shanks and fly nuts andPVC waste pipe,15mm dia 450mm long PVC connection pipe complete all as specified and as directed |
| 109 | S & F in repairs,PVC connection pipe 15mm bore and450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed. |
| 110 | S&F in repairs,vitreous China bowl, urinal flat back or corner wall type, size of 465X 355 X 265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, PVC connection pipe 15mm dia 450mm long, CP waste coupling 32mm (half or full thread) etc pointing around urinal back in cement etc. complete all as specified and directed. |
| 111 | S & F inrepairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed. |
| 112 | S & F in repairs, single piece EWC (concealed \"S\" trap) with soft close seat cover includingflushing cistern,15mm dia and 450mm long PVC connection pipeall internal fittings (twin flush) complete all as specified and as directed. Make-Jaquar cat No- VGS-WHT-0207BP or equivalent make inHindware/parryware |
| 113 | S & F inrepairs, Vitreous China SquattingPan\"Orissa pattern\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. |
| 114 | S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 450mm long etc complete all as specified and as directed. |
| 115 | S & F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to walls andfloors etc complete all as specified and as directed. |
| 116 | S & F in repairs, 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floorcomplete all as specified and as directed.Note : For item No 116 & 117, Excavtion & Earth work is deemed to be include in quoted rate. |
| 117 | S & F in repairs, 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floorcomplete all as specified and as directed. |
| 118 | S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 119 | S & F 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 120 | S&F 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed |
| 121 | S&F 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed |
| 122 | S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal providedcomplete all as specifiec and as directed. |
| 123 | S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed. |
| 124 | S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed. |
| 125 | S&F 110mm bore PVC (SWR) branch piece , single (single Y) equal or unequal with access doorcomplete all as specified and as directed |
| 126 | S&F75mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 127 | S&F75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
