|
| 1 | M& L for Disconnectingcentrifugal pump from motor, suction and delivery pipe line of any Make, model and taking down packingfor removing and insertion of new shaft sleeves or remove Bearing using bearing puller gear and fix new all two bearingsand greasing all parts, coupling pump to motor and check for proper shaft alignments such that no vibration produce during opertionof following capacity pumps, complete all as specfied and as directed by Engineer-in-charge. |
| 2 | Bearings suitable for Pump coupled with 150 HP motor |
| 3 | Bearings suitable for Pump coupled with 120 HP motor |
| 4 | Bearings suitable for Pump coupled with 100 HP motor |
| 5 | Bearings suitable for Pump coupled with 75 HP motor |
| 6 | Bearings suitable for Pump coupled with 60 HP motor |
| 7 | Bearings suitable for Pump coupled with 40/50 HP motor |
| 8 | Bearings suitable for Pump coupled with 30 HP motor |
| 9 | Bearings suitable for Pump coupled with 20 HP motor |
| 10 | S&F in repair AC-3type contactorwith control voltage of 415V AC, 50 Hz with integrated auxillary or Add on block contacts with 1 or 2 NO and NC including connection of control wiringto contactorand testing ofstarter after repairing . |
| 11 | Contactor rating of between 140A to 185A |
| 12 | Contactor rating of between 110A to 140A |
| 13 | Contactor rating of between 80A to 110A |
| 14 | Contactor rating of between 45A to 80A |
| 15 | Contactor rating of between 32A to 45A |
| 16 | Contactor rating of between 18A to 32A |
| 17 | S&F in repair Thermal over load relay with adjustablesetting with integrated auxillary or Add on block contacts with 1 or 2 NO and NC including connection of control wiringto OLR and testing ofstarter after repairing . |
| 18 | OLR of capacity I Min of 135 to I max 225A |
| 19 | OLR of capacity I Min of 78 to I max 130A |
| 20 | OLR of capacity I Min of 69 to I max 115A |
| 21 | OLR of capacity I Min of 52 to I max 75A |
| 22 | OLR of capacity I Min of 45 to I max 65A |
| 23 | M& L for Disconnecting motor frompump of any Make, model andremove Bearing using bearing puller gear and fix new all two bearingsat DE /NDE including necessary greasing ,check for proper shaft alignments such that no vibratiobn produce during opertion of following capacity Motors. |
| 24 | Bearings suitable for Pump coupled with 150 HP motor |
| 25 | Bearings suitable for Pump coupled with 120 HP motor |
| 26 | Bearingssuitable for Pump coupled with 100 HP motor |
| 27 | Bearings suitable for Pump coupled with 75 HP motor |
| 28 | Bearings suitable for Pump coupled with 60 HP motor |
| 29 | Bearings suitable for Pump coupled with 40/50 HP motor |
| 30 | Bearings suitable for Pump coupled with 30 HP motor |
| 31 | Bearings suitable for Pump coupled with 20 HP motor |
| 32 | S&F self lubricated asbestoes non metallic and non graphite gland packing white colour of sizes 8 to 12 mm complete all as specified and directed Make : Champion or equivalent |
| 33 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 150 HP motor |
| 34 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 100 HP motor |
| 35 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 75 HP motor |
| 36 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 60 HP motor |
| 37 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 50/40 HP motor |
| 38 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 30 HP motor |
| 39 | M&L for replacement of MSjaw coupling type-L withspider made of synthetic rubber or gear coupled type of suitable for 20 HP motor |
| 40 | Supply and fixing in repairs MS pipe heavy grade for suction and deliver for pump including necessary fitting including welding, painting with red oxide primer and providing necessary PCC support, all as specfied and directed by Engineer-in-charge of following sizes :- |
| 41 | 300 mm dia |
| 42 | 200mm dia |
| 43 | 150mm dia |
| 44 | 100 mm dia |
| 45 | 80 mm dia |
| 46 | Supply and fix in repairs CI foot valve ball type flanged end IS 4038 PN 0.2 housing complete including replacement of nut bolts, cutting of pipe, welding complete all as specified and directed. |
| 47 | 300 mm bore |
| 48 | 200 mm bore |
| 49 | 150 mm bore |
| 50 | 100 mm bore |
| 51 | M&L for Disconnecting motor power cables of various sizes from electrical motor of different capacities and decoupling from thepump sets,removing and taking down carefully and transporting to authorised workshop ,Dismantaling stator and rotor carefully andrewinding stator assembly with supper enamelled copper windingwire of suitable gauge matching to existing gaugeand cleaning of slots ,core with carbon tetra chloride solution and apply two coats of insulation varnish and keep stator assembly in heating chamber to improve insulation strength ,reassemble motor completey and transporation to site ,coupling pump to motor and check for proper shaft alignments such that no vibratiobn produce during opertion coupling to pump with exact allinment ,connect power cables to motor and testing of following capacity motor |
| 52 | 150 HP |
| 53 | 120 HP |
| 54 | 100 HP |
| 55 | 75HP |
| 56 | 60 HP |
| 57 | 50/40 HP |
| 58 | 30 HP |
| 59 | 20 HP |
| 60 | S & F in repair pressure gauge oil filled type150mm dia range 0-10Kg /Sqcm. Note: quoted rated should includingfor providingof adopter /Ferrule/check nut etc required for fixing pressure guage and necessary alterations including necessary welding to MS or CI pipe fortaping if required. |
| 61 | Supply and laying in replacement of copper unamoured power cable of size 16 sqmmsingle core from motor starter panel to motor in HDPE pipe in ground including copper lugs, nut bolts and washers as reqd at site complete all as specified and directed. |
| 62 | Supply and laying in replacement of copper unamoured power cable of size 25 sqmmsingle core from motor starter panel to motor in HDPE pipe in ground including copper lugs, nut bolts and washers as reqd at site complete all as specified and directed. |
| 63 | Supply and laying in replacement of copper unamoured power cable of size 35 sqmmsingle core from motor starter panel to motor in HDPE pipe in ground including copper lugs, nut bolts and washers as reqd at site complete all as specified and directed. |
| 64 | Supply and laying in replacement of copper unamoured power cable of size 70 sqmmsingle core from motor starter panel to motor in HDPE pipe in ground including copper lugs, nut bolts and washers as reqd at site complete all as specified and directed. |
| 65 | Supply ,install, test and commissioning in replacement of LT Panel board from CPRI approved panel manufacturermade out of of 2mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mmangle iron door front and back openable with locking arrangement indoor type vermin and weatherprooffloormounting type, suitable for 3 phase 4 wire,50 HZ , 415 Volt AC supply with 600A capacity copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc with suitable Cable alleyfor provn of cable entries at bottom with cable glandsincluding the following :-(a) MCCB 4 pole, 415V,400Amps 50 KA - 01 No (incoming) thermo magnetic adjustable release type,ICS=ICU=100% Make :L&T/ABB/Siemens/legrand(b) MCCB 3 pole,415V,250 amps 50 KA - 03 Nos (outgoing) thermo magnetic adjustable release type,ICS=ICU=100% Make L&T/ABB/Siemens/legrand (1 No- Standby)(c)MCB 4 pole , 63 Amps, 10 KA, \"C\" Series -03 Nos(d)Automatic star/Delta starters panel with all accessories mounting suitable for 100 HP-03 Nos. Make :L&T/ABB (1 No - Standby)(e)Automatic star/Delta starters panel with all accessories mounting suitable for 10 HP-02 Nos. Make :L&T/ABB (1 No - Standby)(f) Phase indicating lamps(RYB)-04 set(g) Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96X96mm-04 set. Make: Dip/AE/IMP(h)Suitable CTs for main and for 03 starter panels. |
| 66 | Note for item No. 21 : including all necessary accessories for operation of paneland control wiringwith furrule indicator, current transformers ,push buttons ,indication lamps for RYB phases,ON and OFFswitches,digital voltmeter,ammemter, cable alley,terminal block,selector swithes complete as directed by Engr-in-ChargeNote :- The panel board shall be fabricated from CPRI approved firm and panel drawings shall be submitted by the contractor for approval before placing the order. |
| 67 | Supply and fixing in replacement LED street light luminaire 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDsand secondary lenses with IP-66 protection, Efficeincy : 110LM/W, 10 KV SPD included complete including making connections with copper wire 1.0 sqmm complete all as specified and directed. |
| 68 | S&F in repair/ replacement Sluice valves flanged end, cast iron body, flanged and drilled andrising type Steel spindlewith nut, long body, class P N 16, conforming to IS 14846 of 2000 for following sizes in any position/location including all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed of following sizes :- Note :- ForAdditional manpower, welding, chipping, plastering, digging and any other item required for replacement of the item including making good the disturbed surfaces are deemed to be including in the item rate and no extra payment will be claimed by the contractor to the work. |
| 69 | 150 mm bore |
| 70 | 100 mm bore |
| 71 | 80 mm bore |
| 72 | M&L for replacementof Earthing completely using Copper Bonded Rod of diameter more than 15mm and length of 10 feet below ground level .The material shall be low carbon high tensile copper bonded rods with 99.9 % of copper on the surface. pit shall be filled with highly conductive and eco friendly ground enhancing compound as per IEC 62561- 7 shall be not less than 30Kg per pit & PCC 1:3:6 Earth Pitchamber of size 310mm×300×170mm(W×L×H) with Cast iron covercomplete all as specified and directed |
| 73 | S&F in repair Earth continuity conductor or main earthing lead of size 25× 4mm GI fixed to wall using insulated earth strip atevery 2 feet ditsance earthing strip shouldbe fixed from6th to ground floor and necessary termination with nuts and bolts complete all as specified and directed |
| 74 | Demolition of Exisiting concrete supporting block ofpumps and motor excedding 15cm of thickness aboveand below ground level all specfied and directed by Engineer-in-charge |
| 75 | M&L cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of Base frame with MSbolts placed in concrete andhardstanding finishing even and fair without using extra cement all as specified. Note: Location of bolts and size of bolts should macht the previous one |
| 76 | Supply and fixing in replacement butterfly valve PN 1.6 150 mm dia complete all as specified and directed |
| 77 | Supply and fixing in repair CI swing type non return valve flanged end of following sizes as per IS: 5312 body, cover C-I IS: 210, PN-1.6 complete including replacement of nut bolts, cutting of pipe, welding complete all as specified and directed. |
| 78 | 300 mm bore |
| 79 | 200 mm bore |
| 80 | 150 mm bore |
| 81 | 100 mm bore |
| 82 | Supply and fix in repair, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve100 mm dia consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.Specifications & FeaturesInput Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm.Operating Angle: 90 degreesDisc Material: CI with nylon coatingLimit Switches : 02 Nos.For open and close status Mounting ::Direct mounted |
| 83 | Supply and fix in repair, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve80 mm dia consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.Specifications & FeaturesInput Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm.Operating Angle: 90 degreesDisc Material: CI with nylon coatingLimit Switches : 02 Nos.For open and close status Mounting : Direct mounted |
| 84 | Supply and fix in repair, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve300 mm dia consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.Specifications & FeaturesInput Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm.Operating Angle: 90 degreesDisc Material: CI with nylon coatingLimit Switches : 02 Nos.For open and close status Mounting : Direct mounted |
| 85 | Supply and fixing in repair, Installation Testing & Commissioning of Indoor type Programmable Logic Controller based Valve Automation and communication Panel suitable for control and/or monitoring of 18 Nos motorized valves and 28 Nos. magnetic sensors . The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated. The Panel should have the following features: -(a)Automatic Operation of Motor Actuated Valves (b)01 No. SMPS of 5 A rating (Make: SCHNEIDER / NHP)(c)Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating. (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)(d)MCB of rating 10A -01 No.(Make: Havells/ Schneider)(e)Selector Switches as per requirement(Make: SCHNEIDER / ESBEE).(f)Compatible with OFC based communication Ethernet Switch –16 port GBPS layer 2 manageable switch, Make Cisco, Dlink, Redundant GPRS modembased communication module comprising of one Main and One standby Modem with suitable antenna, modem controller and 02 Nos. data enabled SIM cards (01 No per modem) using two different service providers. The module shall be programmed to automatically toggle between the service providers based on the actual signal strength. switch to the stand by modem in case the main modem fails, Compatible for Wimax Connectivity if required. |
| 86 | Notes for item No. 33:-To make the system fully functional. all panels shall be consisting ofthe following :-(a) Rack mountable Web Smart Switch with 28 ports and POE for CPE hardware and following specifications:-(i) Number of Ports24 10/100Base-TX Ethernet ports2, 10/100/1000BASE-T2 Combo 10/100/1000BASE-T/SFP.(ii)Port StandardSupply and fixing unctions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) • IEEE 802.3x Flow Control • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 Switching Capacity • 12.8 Gbps |
| 87 | (b) Hot pluggable 1310 nm multimode/Single mode SFP (mini-GBIC) transceiver, supporting full duplex, Gigabit speeds on multimode/Single mode fiber for distances of up to 550m/550m/10km on 62.5µm/50µm/9µm respectively in a metal housing to reduce EMI and to increase durabilityMake : Dlink, Ubiquiti, Cisco, Siemens, HP(c)Rack Mountable LIU with the following specifications:-(i) Rack Mountable 12 Port Unloaded LIU(ii)Aluminium Base Material(iii) Slim 1 U mounting height(iv) Metal Shelf Aluminium 1.2 mm thick(v) Splice tray Aluminium 0.6mm (vi) Winding Panel – Plastic(vii) Cable Plug – Rubber for minimum 2 cable entries (viii) Adaptor Panel Aluminium 1.5 mm thick(ix) 2 fiber spools built in for 900 um tight buffered fibre storing(x) Capable of storing upto 3 mts of 900 um tight buffered fibre per adaptor |
| 88 | (d)SC-LC Duplex SM Patch Cord 0.9 mm dia of suitable length (i)Size 0.9mm dia(ii) Insertion Loss <=0.2 db, max 0.3 db(iii) Return Loss PC>=45dB, UPC>=50dB, APC>=60dB (iv) Connector Ferrule Ceramic(v) Apex Offset <50um (vi) Fiber Height +-100nm (vii) End Face Radius of Curvature 7mm |
| 89 | (g)SC-SM-Simplex Pigtail of suitable length(i) Insertion Loss <=0.2 db, max 0.3 db (ii) Return Loss PC>=45dB, UPC>=50dB, APC>=60dB(iii) Connector Ferrule Ceramic (iv) Apex Offset <50um (v) Fiber Height +-100nm(vi) End Face Radius of Curvature 7mm |
| 90 | Above All automation panel should connected to existing SCADA server and anyother leftout devicesand accessories require to commissioning should be consider and same should be include in quoted rates and department will not pay extracost for the same.Make of Control Panel: Cimcon Software Pvt Ltd/ Reckronic Devices and Systems / Sombansi Schneider/UniversalSwitchgear. Note :- Cost for Synchronising of panel in to existing SCADA system is in contractors scope only and no extra payment shall be given to the contractor by the department. |
| 91 | Disconnecting submersible pump set of any type and capcity from existing water supply system by mechanical & electrical means. Taking out / uplifting unserviceable / serviceable pump set connected with column pipe from deep borewell by disconnecting from lowering pipe line of any size manually or with the help of suitable electric driven chain pully system and re-lowering submersble pump set with column pipe in the same borewell after completion of re-developing and re-connecting to make the borewell fully functional complete all as specified and directed by Engr-in-Charge. Note:- (i)All types of T/P required to complete the job shall be arranged by the contractor.(ii) Job will be continued round the clock as per site requirement and directed by Engr-in-Charge.(iii) Delay in job will be charged @ Rs. 500/- per hour of delay.(iv) Items required for submersible cable with motor connection such as PVC insulation tape, valcanised rubber / puncture tube etc shall be provided by the contarctor to complete the work and the cost of the same shall be deemed included in unit rate. No extra payment shall be made to the contractor on any account.(v) Quoted rate shall be including for transporting / shifting of Compressor, Overpumping unit and connected T&P from one site to another and installation etc.(vi) All type of water arrangement with pipe including excavation for storage of water required at site will be done by the contractor along with removing and returning filling and the rate for the same deemed to be included in the quoted rate. |
| 92 | M&L for packing pea gravel of size 2to 4 mm of natural shape brought direct fromriver bed and packing around the assembly of borewell including filling during development upto ground level complete all as specified and directed by Engr-in-Charge. Note:- All type of water arrangement with pipe including excavation removing and returning filling required at site for packing of pea gravel will be arranged by the contractor and the rate for the same deemed to be included in the quoted rate. |
| 93 | Re-developing of borewelll by air compressor with minimum pressure of 300 PSI and minimum 1100 CFM all as specified in IS 11189-1985, para 4.3 and directed at site. Note : (i) Compressor, pump, pipe and other allied items shall be arranged by the contractor and nothing extra shall be admissible on this account. |
| 94 | Developement ofborewell by means of over pumping unit with vertical turbine motor capacity not less than 28000 GPH as required to achieve permises sand free water obtained from bore well complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F in repair MS flat iron clamp for holding 150/125/100/80mm column pipe with necessary nut bolts washers complete all as specified and directed by Engr-in-Charge. |
| 96 | Demolition of foundation of borewell around housing/ casing pipe as required on site of any type and size including excavation ,returning and removing and disposing off the materials from site complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for construction of borewell foundation including necessary brick work, cement concrete, plastering etc complete all as specified below :-(a) Brick work around the bore well at a radius of 225 mm from Housing Pipe, depth below floor / ground level 600 mm complete all as specified and directed by Engr-in-Charge.(b) PCC (1:1.5:3) type A-1 (using 20 mm graded stone agreegate) for filling in between brick and old surface of pump house floor including 50mm thick coping on top of brick / PCC work including finishing the surfaces even and fair complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for removing extra soil ,mud, sand collected during redevelopment of borewell to a suitabledistance and depositing where directed and make the surface good around pump house borewell including cleaning of any blocked drainage complete all as specified and directed by Engr-in-charge. |
| 99 | Supply and Fixing in repair rolling shutter with ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear box,etc gear operated type with chain wheel and hand chain and one shop coat of primer erected in positioncomplete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for installation in replacement of 3D Acrylic letter board of various sizes consisting of following specification :- (i) Frame work for glow sign board to be made with MS square pipe of size 25x25x2.6mm cut to required size incl welding, drilling holes, bending etc and painted with two coats of synthetic enamel paint over one coat of red oxide primer complete for required size complete. (ii) ACP Sheet of 0.8 mm thickness cut to required size and fixed by screwing, drilling holes, bending etc from all sides of the board except front.(iii) Acrylic sheet milky white colour 3.0mm thickness cut to required size and fixed in front. (iv) Matter for writing, Colour, type and size of font will be approved by GE.(v) Creating 3D Acrylic letters from the design approved by GE, using a laser cutting machine followed by extrading in 3D using a metthod called skirting. (vi) LED modules fitted in the hollow space beneath the 3D letters or logo of signboard with necessary electric fittings and connection from existing pole / DB complete.(vii) MS square pipe for support 100x100x5mm shall be used for support of board and painted with two coats of synthetic enamel paint over one coat of red oxide primer.Note:- (i) Grouting the support pipe in Brickwork/RCC pillars using (1:3:6) PCC shall be considered in quoted rate for this item.(ii) The support MS Square pipe to be fixed in ground/pillar all as per specified and as directed.(iii) Sintex junction box fixed with 1 MCB SP of capacity 06 to 10 Amp for ON/OFF control of glow sign board and cable for making connection from existing pole / DB / Busbar to Junction box deemed to be included in the rates quoted. |
| 101 | Supply, lowering and fixing in replacement GI column pipe ISI marked both ends flanged of thickness 10 mm for 80-mm dia bore in 3 mtr length having wall thickness 4.8 mm as per IS - 1293 complete including rubber gasket, slot cutting in flanges for passing submersible cable nut, bolts washers, etc all as specified and directed. |
| 102 | Supply and fixing in repairMCCB 4 Pole with thermal adjustment of 0.8 to 1In and magnetic adjustable 5 t0 10 In andIcs=100% of Icu and repacing burnout copper spreaders of suitable size including nuts and bolts andfixing to existing panelincluding necessary alternation to existing busbar and panel all as specfied and directed by Enginner-in-charge |
| 103 | MCCB of 630 A,Breaking capacity 50 KA,4P |
| 104 | MCCB of 400 A,Breaking capacity 36 KA,4P |
| 105 | MCCB of 200A,Breaking capacity 36KA,4P |
| 106 | MCCB of 160A,Breaking capacity 36KA,4P |
| 107 | MCCB of 125 A,Breaking capacity 16KA,4P |
| 108 | MCCB of 63 A,Breaking capacity 16KA,4P |
